Re: [weewx-user] Re: Weatther Station stops same time every week

OK, lets see if I can get it right this time! mylog <https://drive.google.com/file/d/11Ho3ZSODZgTH-WZ39Ak_JBqNh9YaTSMZ/view?usp=drive_web> On Tue, Aug 27, 2024 at 2:15 PM vince wrote: > Set debug=1 and maybe we can figure it out > > On Monday, August 26, 2024 at 1:02:43 PM

Re: [weewx-user] Re: Weatther Station stops same time every week

u have an archive period of 10 minutes if it's running off the hardware > interval of 600 seconds so we need to see a few cycles. > > On Monday, August 26, 2024 at 1:38:03 AM UTC-7 dunbrokin wrote: > >> Apologies, yes it's always a good idea. >> >> For the

Re: [weewx-user] Re: Weatther Station stops same time every week

Apologies, yes it's always a good idea. For the last 3 weeks on Sat night at 11.50 it stopped recording.but rebooting started it again the next day. However this week after rebooting it stopped at 11.10 am and despite rebooting, it never started recording again. So I ran the log as per the i

Re: [weewx-user] Re: Remove Inide Temp graph

Thank you for that, much appreciated...I would not have thought of looking there! On Mon, Jul 22, 2024 at 12:06 PM gjr80 wrote: > Did you look in the Standard skin skin.conf under [ImageGenerator] > [[day_images]]: > > [[day_images]] > > > [[[dayinside]]] > [

Re: [weewx-user] Re: After weewx.conf change there are critical issues!!

Sorry, just one more thing. In the skin I was using (for many years) until all this happened, I was able to include a photograph every hour of the weather. I have no idea how I did this as it was so long agocan somebody throw me a crumb please so that I can start working on that. I think I am u

Re: [weewx-user] WeeWX v5.1 is available

Thank you for thatbut pi@WeatherPi:~ $ sudo apt install -y wget gnupg Reading package lists... Done Building dependency tree Reading state information... Done gnupg is already the newest version (2.1.18-8~deb9u4). wget is already the newest version (1.18-5+deb9u3). 0 upgraded, 0 newly install

Re: [weewx-user] Problem with weewx after power failure

Yes apologies, it has been so long since my system misbehaved (probably 10 years), I had forgotten what was required. I looked back over the history of commands in the terminal of the Rpi and found these commands: (probably given to me by you last time around) 1297 sudo /etc/init.d/weewx stop 12

Re: [weewx-user] Problem with weewx after power failure

Yes tried that thank you! On Sun, Apr 14, 2024 at 2:12 AM p q wrote: > Did you try rebooting the Pi? 😜 > > > > On Sat, Apr 13, 2024, 6:35 AM Tom Keffer wrote: > >> You're not giving us much information. At the very least, what kind of >> weather station? Better yet, include the log. See the wik

Re: [weewx-user] Problem with weewx after power failure

[image: image.png] On Sat, Apr 13, 2024 at 12:38 PM Monica Mulholland wrote: > My Rpi with weewx has been running very successfully for many > years.until we had a power failure recently. I can still get into my > Rpi from my desktop and see that it is runningbut nothing is been > updat

Re: [weewx-user] Re: WeeWX 4.10.1 not updating web page graphics

I have the same problem. Graphs no longer updatingthe information (at the side) in the boxes/spreadsheet is updated.but not the graphs. I have rebooted and it made no difference. On Sat, Feb 4, 2023 at 4:38 AM Tom Keffer wrote: > See this thread >

Re: [weewx-user] How to pronounce "WeeWX"

I pronounce it WeeWix! On Mon, Aug 12, 2019 at 6:49 PM Michi Kaa wrote: > I've searched the docs, the forum, the web. > > How is "WeeWX" pronounced? > > Or maybe first: Is "WeeWX" pronounced? Or do you simply say "double u e e > double u ex?" or "double u double e double u ex?" Is it an abbrevia

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Thanks, but no I don't I use VNC. On Tue, Jan 29, 2019 at 11:35 AM wrote: > Just a quick question. Do you have a monitor (like the Pi 7 in touch > screen) attached that is running off the same power supply as the Pi? I had > a setup like that which used a splitter to power both the monitor a

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

I am using a powered hub and I am using the official RPi power source. On Mon, Jan 28, 2019 at 10:05 PM Andrew Milner wrote: > I would suggest you work on eliminating the under voltage errors before > trying to work out why you cannot communicate with the weather station. > The implication is th

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Thank you for that! On Wed, Jan 23, 2019 at 1:38 AM Andrew Milner wrote: > there are 'official' readings at LOOP intervals as well as REC (archive) > intervals. > > You have the option in weewx.conf [StdArchive] section of saying whether > to use loop value for max reading or archive value. If

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Wow! cool thanks! On Wed, Jan 16, 2019 at 9:17 PM gjr80 wrote: > wee_import will import it all month by month. You just drop all your log > files into a single directory and wee_import works through the lot. > > Gary > > On Wednesday, 16 January 2019 18:12:48 UTC+10, monmul wrote: >> >> Great th

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Great thank you so much!should I import month by month...or transfer all the monthly data to one big file (probably 100 months in total) and import it in one big hit? On Wed, Jan 16, 2019 at 8:47 PM gjr80 wrote: > Good. I have a first cut of a wee_import that supports importing Weather > Dis

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

H.I thought the error was in skin.confbut you think it might be in weewx.conf. On Wed, Jan 16, 2019 at 8:04 PM gjr80 wrote: > Jan 16 19:17:34 raspberrypi weewx[530]: reportengine: Failed to read skin >> configuration file /etc/weewx/skins/Standard/skin.conf for report >> Standard

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Thanks for that...will do! On Mon, Jan 14, 2019 at 2:45 PM Greg Troxel wrote: > monmul writes: > > > I am searching for how to turn off showing the "internal temperature" > graph > > but cannot see a anything in skin.conf or in weewx.conf.what am > I > > missing? > > Also, if your real

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Thank you so much! On Mon, Jan 7, 2019 at 8:29 PM gjr80 wrote: > Yes. That is a setting for the console rather than a weeWX config setting. > You have two choices; you can set it manually via buttons on the console or > you can set it using the wee_device >

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Hmmm! Something weird is happening the cat syslog will not display as far as today and stops part way through and crashes VNC so it has to reconnect! On Mon, Jan 7, 2019 at 6:12 PM dunbrokin wrote: > @Weatherpi:~ $ sudo systemctl status weewx > ● weewx.service - LSB: weewx weather

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

@Weatherpi:~ $ sudo systemctl status weewx ● weewx.service - LSB: weewx weather system Loaded: loaded (/etc/init.d/weewx) Active: active (exited) since Mon 2019-01-07 17:17:08 NZDT; 55min ago Process: 510 ExecStart=/etc/init.d/weewx start (code=exited, status=0/SUCCESS) Jan 07 17:17:08 Wea

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

No, its not that...I have set weewx up to start on bootand it was doing so when not headlessso I presumed it would be the same when it was running headless On Mon, Jan 7, 2019 at 2:28 PM monmul wrote: > Duh! thanks Gary! > > On Sunday, 6 January 2019 14:37:27 UTC+13, monmul wrote: >>

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

ch measured >> item) into weewx? Where is the historic information stored and is there an >> easy way of importing the data from WeatherDisplay? >> >> On Mon, Jan 7, 2019 at 9:35 AM dunbrokin wrote: >> >>> Right I have 10.1.1.1 and 8.8.4.4 as "nameserve

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Thank you for all your help Scott in getting me up and running.I really appreciate it. Hopefully some other kind soul can come to the party for the next step! On Mon, Jan 7, 2019 at 9:42 AM Scott Grayban wrote: > That I can't help with. Sorry > On Jan 6, 2019, at 12:40 PM, dunbr

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

dunbrokin wrote: > Right I have 10.1.1.1 and 8.8.4.4 as "nameserver" (while shown as > "name_servers" in the resolvconf.conf file) in the resolv.conf fileI > presume that will do the job? > > > On Mon, Jan 7, 2019 at 9:32 AM Scott Grayban wrote: > &

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

all resolvconfd. > On Jan 6, 2019, at 12:30 PM, dunbrokin wrote: >> >> Using nameserver instead of name_server means that none of them appear in >> the resolv.conf file! >> >> On Mon, Jan 7, 2019 at 9:27 AM dunbrokin < dunbro...@gmail.com> wrote: >> >&

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Using nameserver instead of name_server means that none of them appear in the resolv.conf file! On Mon, Jan 7, 2019 at 9:27 AM dunbrokin wrote: > OK will do again. Just looked in the resolv.,conf file.I get > nameserver 8.8.4.4 but not the 8.8.8.8! > > On Mon, Jan 7, 2019 at 9

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

OK will do again. Just looked in the resolv.,conf file.I get nameserver 8.8.4.4 but not the 8.8.8.8! On Mon, Jan 7, 2019 at 9:23 AM Scott Grayban wrote: > Use > > nameserver not name_server > On Jan 6, 2019, at 12:20 PM, dunbrokin wrote: >> >> Thank you so

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

rver" is the one I should use. On Mon, Jan 7, 2019 at 9:11 AM dunbrokin wrote: > Great, thanks, will do.does this now get around the installation of > NTP daemon as recommended in the set up instructions? > > On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban wrote: > >&g

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Thank you so much for your help Scott! On Mon, Jan 7, 2019 at 9:14 AM Scott Grayban wrote: > If it works yes. > On Jan 6, 2019, at 12:11 PM, dunbrokin wrote: >> >> Great, thanks, will do.does this now get around the installation of >> NTP daemon as recommended in

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Great, thanks, will do.does this now get around the installation of NTP daemon as recommended in the set up instructions? On Sun, Jan 6, 2019 at 9:54 PM Scott Grayban wrote: > Ok replace that with this then reboot the PI and look at your weewx log > again for the ntp sync. > > After reboot y

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

as in yes it does have a resolvconf.conf file.just in case there was confusion! On a totally different topic, Is there some where I can use an offset of 180 degrees for the wind? I cannot find it in the config file? On Sun, Jan 6, 2019 at 7:43 PM dunbrokin wrote: > Yes it d

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

Yes it does! On Sun, Jan 6, 2019 at 7:11 PM Scott Grayban wrote: > Does your PI have this file ? > > /etc/resolvconf.conf > > On Saturday, January 5, 2019 at 10:09:18 PM UTC-8, monmul wrote: >> >> The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my >> modem? >> But these are

Re: [weewx-user] Re: Getting the RPi 3 with Davis Vantage up and running

The nameserver in my Pi /etc/resolv.cont is 10.1.1.1.as that is my modem? But these are extenal IP addresseswill that work? On Sun, Jan 6, 2019 at 6:50 PM Scott Grayban wrote: > Forget that... you need to edit your /etc/resolv.conf > > Add > nameserver 8.8.8.8 > nameserver 8.8.4.4 > > Or