pi@raspberrypi:~ $ nwetstat -lpnt tn do
(Not all processes could be identified, non-owned process info
will not be shown, you would have to be root to see it all.)
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
PID/Prog
Jim
I don't know if your actiontec modem/router have the possibility to add the ip
tables in the right way.
I have also struggled with my Ubee modem/router.
The solution for me was to install an asus router (second hand rt-n66u) behind
my Ubee and switched the Ubee to bridge mode.
I setup the a
When you search on this forum for ws-2902 or ventus w830, you will find
information how to setup the interceptor driver.
But the difficult part is often the router. The weatherdata send to WU must
also be routed to your raspberry pi (by ip tables). Not every router has this
possibility.
Which ro
I don't know which router you have, but I have a Asus rt-n66u
This router have a possibility of command line access (telnet or ssh)
What I did is the following:
enable SSH in my router
connect with putty (or other ssh client) to my router
type the 2 iptable rules
after that, interceptor driver
If you want to try fixing it with ip tables in your router, these are my
rules in my router:
iptables -t mangle -A PREROUTING -s 192.168.179.52 -j ROUTE --tee --gw
192.168.179.118
iptables -t mangle -A POSTROUTING -d 192.168.179.52 -j ROUTE --tee --gw
192.168.179.118
The first IP is my weath
I think I had the same problem: my weewx couldn't read the station data from my
ventus w830 (simular to ws2902).
But after I added ip tables in my router, the data is routed to my weewx ip
adress and still also to Weather Underground.
Interceptor driver now reads the data into weewx without pro
Also it could be that your weewx is still using simulated weatherdata instead
of your ws 2902 data.
What I see in the interceptor section of your config file that you must remove
the last three # symbols to activate those lines.
--
You received this message because you are subscribed to the Go
Hello Maarten
I tried several times to upgrade my station from 1.1.2 to 1.1.4 firmware
through the ws tool app, But I didn't succeeded, I got the message download
fails.
So I cannot give you at this moment an answer if WOW works directly.
But with the weewx coupled to my station it is working wi
I succeeded to run weewx with the latest interceptor driver connected to my
ventus w830 weather station. Working great! Also thanks to Fred for your info:
I also use a asus wrt router with the 2 ip tables rules.
--
You received this message because you are subscribed to the Google Groups
"weew
Hello Fred
Very interesting what you are trying to fix.
I also planned to buy a ventus w830 and if possible connect it to weewx.
Unfortunately I can't help you directly,but maybe you can search on fine offset
wh2900.
It's the same weather station and there was a thread about it in april/may.
The
10 matches
Mail list logo