You can make changes in the skin.conf but that file is replaced when the
skin is updated. So, you make changes in the Belchertown stanza in
weewx.conf and that does not change.
The skin is not driver dependent.
On Tuesday, August 16, 2022 at 7:26:09 AM UTC-4 ccroom wrote:
> Gary, that line is
Gary, that line is in the Belchertown skin.conf file. I had tried just as
you suggested but I must have used an incorrect description for the station
observation. In any event, I made the addition and it populated just
fine. If I decide to revert to the WLLDriver do you know what if any
Find this line in weewx.conf
station_observations = "barometer", "dewpoint", "outHumidity",
"rainWithRainRate"
Add UV and radiation
On Sunday, August 14, 2022 at 1:34:35 PM UTC-4 ccroom wrote:
> I am currently using a data logger. I also have a Weatherlink Live device
> and have used the
I am currently using a data logger. I also have a Weatherlink Live device
and have used the WLLDriver but not using it to extract data at this time.
Clay
On Sunday, August 14, 2022 at 12:37:04 PM UTC-4 do...@dougjenkins.com wrote:
> Clay:
>
> I have the same setup and I am able to show both
Clay:
I have the same setup and I am able to show both UV and Solar Radiation
sensors. First how are you connecting WeeWX to the station? Are you using a
data logger or WeatherLink Live?
On Sun, Aug 14, 2022 at 12:23 PM ccroom wrote:
> I just upgrade my station to a Davis Vantage Pro2+ with UV
I just upgrade my station to a Davis Vantage Pro2+ with UV & Solar
Radiation Sensors. I am using the basic Belchertown skin and would like it
now to show the readings from these 2 new sensors. I have looked at the
Belchertown instructions and reviewed the weesx.conf file but can't find