Hi Matt,
I noticed that in addition to the reset button on the sensor there's an
activate button on the hub - what does that do? I'm worried that pressing
it might screw up the other sensors? Is it worth trying it?
Regards,
Ken.
On Tuesday 30 January 2024 at 17:24:46 UTC+1 matthew wall wrote:
On Sunday, January 28, 2024 at 12:02:51 PM UTC-5 ken.r...@gmail.com wrote:
Hi Matt,
When I point the web browser at the hub, I only see 4 sensors, but I've
always only seen 4 sensors even when all 6 were working.
Wireshark shows traffic from 5 of the 6 sensors, there's nothing from this
6th
Hi Matt,
When I point the web browser at the hub, I only see 4 sensors, but I've
always only seen 4 sensors even when all 6 were working.
Wireshark shows traffic from 5 of the 6 sensors, there's nothing from this
6th sensor and nothing from an unknown sensor ID.
I don't have a 433MHz
ken,
what do you see when you point a web browser at the hub? are all of your
sensors listed?
check everything. watch the http requests from the hub to the machine
running weewx (use tcpdump, or wireshark, or turn up the verbosity in the
interceptor). see which sensors are in the requests,
On Tuesday, January 23, 2024 at 3:24:13 PM UTC-5 ken.r...@gmail.com wrote:
That's why I wondered if the hub needs to have it registered, but you say
that the hub should pick up everything within range regardless,
Anything else I could try?
the smarthub/bridge is pretty dumb - just a relay.
Hi Matthew,
Thanks for the hint. I just got the router to sniff the network traffic
between the hub and the weewx server (it's Fedora not Debian BTW) and as
it's HTTP and not HTTPS I can set every update unencrypted
e.g.
HTTP 124 GET
On Monday, January 22, 2024 at 2:46:51 AM UTC-5 ken.r...@gmail.com wrote:
Recently I moved home and lost a sensor in one of the packing boxes and
then found it again after the battery had been flat for almost 6 months. It
displays temperature and humidity and the repeater flickers when it
On Monday, January 22, 2024 at 2:46:51 AM UTC-5 ken.r...@gmail.com wrote:
I setup Weewx 3.9.1 about 6yrs ago when Acurite dropped support for their
SmartHub, and haven't upgraded since.
Recently I moved home and lost a sensor in one of the packing boxes and
then found it again after the
What driver are you using?
On Monday, January 22, 2024 at 2:46:51 AM UTC-5 ken.r...@gmail.com wrote:
> I setup Weewx 3.9.1 about 6yrs ago when Acurite dropped support for their
> SmartHub, and haven't upgraded since.
>
> Recently I moved home and lost a sensor in one of the packing boxes and
>