On Sunday, June 23, 2019 at 2:22:02 AM UTC-4, Richard Horobin wrote:
>
> Dear Team,
> This seems relevant to me, as I'm also trying to use RTL_433 to intercept
> radio messages from my Acurite 5n1, as I didn't want to buy their Bridge.
> Now I'm trying to configure weewx.conf so that it will
Dear Team,
This seems relevant to me, as I'm also trying to use RTL_433 to intercept
radio messages from my Acurite 5n1, as I didn't want to buy their Bridge.
Now I'm trying to configure weewx.conf so that it will take or receive
data via RTL_433 and then pass it to WOW in UK.
Needless to
This seems relevant to me, as I'm also trying to use RTL_433
On Monday, 11 February 2019 15:09:04 UTC+11, N0ZO wrote:
>
> So I've wanted to use SDR to capture the data of the ObserverIP that I
> have. I have the WS-1400-IP which is a rebranded HP-1000 by Fine Offset.
> It took me forever to
I just remembered I need it to run through the SDR with weewx to get the
sensor map name, i'll do that shortly
On Friday, May 24, 2019 at 2:56:15 PM UTC-5, N0ZO wrote:
>
> I've got two new sensors that I want to add to weewx.
> It looks identical to the WH25 but rtl_sdr recognizes it as a WH32B.
I've got two new sensors that I want to add to weewx.
It looks identical to the WH25 but rtl_sdr recognizes it as a WH32B.
{"time" : "2019-05-24 19:44:17", "model" : "Fine Offset Electronics, WH25",
> "id" : 104, "temperature_C" : 24.400, "humidity" : 51, "pressure_hPa" :
> 994.600,
Heh, yup, that is what I get for trying to do this from memory. I do not
see the WH24 mapped in your confrig, and perhaps the error in the log is
you have logging turned on for unknown protocols. Try this in your SDR
section:
[SDR]
# This section is for the software-defined radio driver.
Is -p not for the ppm offset error?
I think -R is the one needed to select 78 for the device type. I tried
switching it around both ways, and still get the exact same error.
On Sunday, February 10, 2019 at 10:26:18 PM UTC-6, tor...@torrin.org wrote:
>
> You're running protocol 66 and the WH24
You're running protocol 66 and the WH24 is 78. Try this:
rtl_433 -M utc -F json -p 78 -f 91500
(you don't need -G here, since you don't want all protocols turned on)
Also, please post your entire weewx.conf, especially the SDR section.
On Sunday, February 10, 2019 at 10:09:04 PM
