Raspberry Pi4, I've been looking at the CPU load over the last few hours
with 1 minute archive interval and MQTT updates for 4 "live" clients. This
is negligibly low with less than 10%.
Am Mittwoch, 13. November 2019 20:58:41 UTC+1 schrieb vince:
>
> On Wednesday, November 13, 2019 at 10:24:21 A
On Wednesday, November 13, 2019 at 4:06:48 PM UTC-8, Greg Troxel wrote:
>
> vince > writes:
>
> > On Wednesday, November 13, 2019 at 10:24:21 AM UTC-8, Udo Nixda wrote:
> >
> >> using Belchertown skin v1.0.1 with MQTT with my Vantage Pro2. Realtime
> >> would be wonderful, but I can't find the
vince writes:
> On Wednesday, November 13, 2019 at 10:24:21 AM UTC-8, Udo Nixda wrote:
>
>> using Belchertown skin v1.0.1 with MQTT with my Vantage Pro2. Realtime
>> would be wonderful, but I can't find the settings to change the current
>> update rate from 60 seconds to 2.5 seconds.
>>
>>
> Be
I have Vantage Pro2 connected to the RPi 3+ via an SDR and I'm using
the Belchertown skin v1.0.1 with MQTT enabled. The CPU averages 12% between
archives and 34% during archives.
Rich
On Wednesday, November 13, 2019 at 2:58:41 PM UTC-5, vince wrote:
> On Wednesday, November 13, 2019 at 10:24:2
On Wednesday, November 13, 2019 at 10:24:21 AM UTC-8, Udo Nixda wrote:
> using Belchertown skin v1.0.1 with MQTT with my Vantage Pro2. Realtime
> would be wonderful, but I can't find the settings to change the current
> update rate from 60 seconds to 2.5 seconds.
>
>
Belchertown is kind of an ex