hi andy
access passes through fedora to the internet.
enp1s0 is the access
wlp4s0 is wifi to router (internet)
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
0.0.0.0 192.168.1.1 0.0.0.0UG6000
0 wlp4
The Access and my Fedora VM are plugged into the same network switch -
Switches are Layer 2 devices, generally you will not see traffic from
Acurite Access to the acurite servers.
I do have two Ethernet adapters so I gave it a try. In this
configuration, the Acurite Access just blinks red. -
i use the access's wunderground for pressure
setup access -> fedora -> myacurite.com (web)
fedora hijack dns rtupdate.wunderground.com -> fedora apache cgi script
fedora runs dhcpd and dns server for the wired network the access is on
On Tuesday, September 6, 2022 at 11:08:53 AM UTC-5 meteo219 wr
So adding the sensor_map didn't help. I am not seeing any data using the
interceptor.py looking at that Access. The Access and my Fedora VM are
plugged into the same network switch and I can access the Access website
using: http://192.168.0.245/. Based on what I read, it sounds like I may
ne
Hi Vince,
That was definitely part of my problem. I moved the webserver to port 81
and no more error messages. But, now I am just getting empty queues:
python3[8517]: weewx[8517] INFO user.interceptor: driver version is 0.60
python3[8517]: weewx[8517] INFO user.interceptor: device type: wu-clie
On Saturday, September 3, 2022 at 2:52:43 PM UTC-7 meteo219 wrote:
> I do have a webserver on my weewx device (192.168.0.98) running Fedora 36
> so yes that error does make sense.
>
So.perhaps you might try shutting down your webserver (temporarily) or
run it on a different port.
You can
Hi guys,
I do have a webserver on my weewx device (192.168.0.98) running Fedora 36
so yes that error does make sense. I am looking to avoid the sdr route if
possible as it requires more hardware. Currently, my Acurite Access
(192.168.0.245) is feeding WU with data from my Acurite Iris 5-in-1
Regards your listen mode error. Check you don't have something else on your
WeeWX device using port 80. Obvious candidate is a web server.
Gary
On Friday, 2 September 2022 at 01:46:33 UTC+10 meteo219 wrote:
> Hello folks,
>
> I am trying to setup weewx from my old 2015 Acurite 5-in-1 weather st
hi
fedora 36 does not have a pcap rpm for python3 you would have to install
the pcap with pip3 if there is one for python3
i use sdr for my atlas, 5n1s, lightning, towers and pro sensors on fedora 36
On Thursday, September 1, 2022 at 10:46:33 AM UTC-5 meteo219 wrote:
> Hello folks,
>
> I am try