Hi, and thanks to all in advance,
I am trying to install SteelSeries gauges to my weewx raspberry pi. Weewx was installed from a DEB package. It is partly working in that I see a web page at http://192.168.1.125/weewx/ss/ that mentions at the bottom....... Interval: 5 minutes Station: Simulator Software: WeeWX 3.7.0 <http://www.weewx.com/> Scripts: by Mark Crossley Gauges: SteelSeries <https://github.com/HanSolo/SteelSeries-Canvas> by Gerrit Grunwald But that is it. No gauges are displayed. Included are some Log files. Here is what I have done. copy weather_server/WeeWX/skin.conf WEEWX_SKINS_DIR/ss/ copy weather_server/WeeWX/index.html.tmpl WEEWX_SKINS_DIR/ss/ copy weather_server/WeeWX/gauge-data.txt.tmpl WEEWX_SKINS_DIR/ss/ copy web_server/css folder to WEEWX_SKINS_DIR/ss/ copy web_server/scripts folder to WEEWX_SKINS_DIR/ss/ edied WEEWX_SKINS_DIR/ss/scripts/gauges.js weatherProgram : 6 imgPathURL : '' stationTimeout : 10 // set to twice archive interval, in minutes showUvGauge : false // false if there is no UV sensor showSolarGauge : false // false if there is no solar radiation sensor add a SteelSeries section to StdReport in weewx.conf [StdReport] ... [[SteelSeries]] skin = ss HTML_ROOT = /var/www/html/weewx/ss wee_debug output pi@raspberrypi:~ $ wee_debug --info Using verbosity=1, displaying most info wee_debug output will be sent to stdout(console) Using configuration file /etc/weewx/weewx.conf Using database binding 'wx_binding', which is bound to database 'archive_sqlite' System info CPU implementer: 0x41 Features: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU architecture: 7 BogoMIPS: 76.80 Hardware: BCM2709 CPU revision: 4 CPU part: 0xd03 model name: ARMv7 Processor rev 4 (v7l) Serial: 000000000eccebc4 processor: 3 CPU variant: 0x0 Revision: a02082 Operating system: debian 8.0 Linux raspberrypi 4.4.50-v7+ #970 SMP Mon Feb 20 19:18:29 GMT 2017 armv7l 1 minute load average: 0.00 5 minute load average: 0.03 15 minute load average: 0.00 General weewx info Weewx version 3.7.0 detected. Station info Station type: Simulator Driver: weewx.drivers.simulator Driver info [Simulator] # This section is for the weewx weather station simulator # The time (in seconds) between LOOP packets. loop_interval = 2.5 # The simulator mode can be either 'simulator' or 'generator'. # Real-time simulator. Sleep between each LOOP packet. mode = simulator # Generator. Emit LOOP packets as fast as possible (useful for testing). #mode = generator # The start time. If not specified, the default is to use the present time. #start = 2011-01-01 00:00 # The driver to use: driver = weewx.drivers.simulator Currently installed extensions No extensions installed Archive info Database name: weewx.sdb Table name: archive Unit system: 1 (US) First good timestamp: 2017-03-13 22:35:00 EDT (1489458900) Last good timestamp: 2017-03-14 21:35:00 EDT (1489541700) Number of records: 274 weewx (weewx.conf) is set to use an archive interval of 300 seconds. The station hardware was not interrogated in determining archive interval. Databases configured in weewx.conf Database name: weewx.sdb Database driver: weedb.sqlite Database name: weewx Database driver: weedb.mysql Database host: localhost Parsed and obfuscated weewx.conf # WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2015 Tom Keffer <tkef...@gmail.com> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.7.0 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = Up on the Pole # Latitude and longitude in decimal degrees latitude = 43.149 longitude = -74.6863 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 710, foot # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = Simulator # If you have a website, you may specify an URL #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [Simulator] # This section is for the weewx weather station simulator # The time (in seconds) between LOOP packets. loop_interval = 2.5 # The simulator mode can be either 'simulator' or 'generator'. # Real-time simulator. Sleep between each LOOP packet. mode = simulator # Generator. Emit LOOP packets as fast as possible (useful for testing). #mode = generator # The start time. If not specified, the default is to use the present time. #start = 2011-01-01 00:00 # The driver to use: driver = weewx.drivers.simulator ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = false [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. enable = false username = XXX obfuscated by wee_debug XXX # To guard against parsing errors, put your password in quotes: password = XXX obfuscated by wee_debug XXX [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = false station = XXX obfuscated by wee_debug XXX # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. enable = false station = XXX obfuscated by wee_debug XXX # To guard against parsing errors, put your password in quotes: password = XXX obfuscated by wee_debug XXX [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. enable = false station = XXX obfuscated by wee_debug XXX # To guard against parsing errors, put your password in quotes: password = XXX obfuscated by wee_debug XXX [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. enable = false station = XXX obfuscated by wee_debug XXX # To guard against parsing errors, put your password in quotes: password = XXX obfuscated by wee_debug XXX # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = False ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding # Each of the following subsections defines a report that will be run. [[SteelSeries]] skin = ss HTML_ROOT = /var/www/html/weewx/ss [[StandardReport]] # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. # The StandardReport uses the 'Standard' skin, which contains the # images, templates and plots for the report. skin = Standard [[[Units]]] [[[[Groups]]]] group_altitude = foot group_speed2 = mile_per_hour2 group_pressure = inHg group_rain = inch group_rainrate = inch_per_hour group_temperature = degree_F group_degree_day = degree_F_day group_speed = mile_per_hour [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, uncomment and fill out the next four lines. #user = replace with the ftp username #password = replace with the ftp password; put in quotes to guard against parsing errors. #server = replace with the ftp server name, e.g, www.threefools.org #path = replace with the ftp destination directory (e.g., /weather) # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The following three lines determine where files will be sent. #server = replace with the rsync server name, e.g, www.threefools.org #path = replace with the rsync destination directory (e.g., /weather) #user = replace with the rsync username # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour pressure = 24, 34.5, inHg ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # Derived quantities are calculated by this service. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware barometer = prefer_hardware altimeter = prefer_hardware windchill = prefer_hardware heatindex = prefer_hardware dewpoint = prefer_hardware inDewpoint = prefer_hardware rainRate = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.wxmanager.WXDaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_type = SQLite database_name = weewx.sdb # MySQL [[archive_mysql]] database_type = MySQL database_name = weewx ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = XXX obfuscated by wee_debug XXX # The password for the user name. Put in quotes to guard against parsing errors. password = XXX obfuscated by wee_debug XXX ############################################################################## # This section configures the internal weewx engine. [Engine] [[Services]] # This section specifies the services that should be run. They are # grouped by type, and the order of services within each group # determines the order in which the services will be run. prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport wee_debug report successfully generated 2017 [try http://www.rsyslog.com/e/2007 ] Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 14:20:00 EDT (1489515600) to database 'weewx.sdb' Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 14:20:00 EDT (1489515600) to daily summary in 'weewx.sdb' Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Running reports for latest time in the database. Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Running report SteelSeries Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/ss/skin.conf for report SteelSeries Mar 14 14:20:15 raspberrypi weewx[13193]: copygenerator: copied 6 files to /var/www/html/weewx/ss Mar 14 14:20:15 raspberrypi weewx[13193]: cheetahgenerator: using search list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 14:20:16 raspberrypi weewx[13193]: cheetahgenerator: Generated 2 files for report SteelSeries in 0.69 seconds Mar 14 14:20:16 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 14:20:17 raspberrypi weewx[13193]: imagegenerator: Generated 11 images for SteelSeries in 0.75 seconds Mar 14 14:20:17 raspberrypi weewx[13193]: reportengine: Running report StandardReport Mar 14 14:20:17 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/Standard/skin.conf for report StandardReport Mar 14 14:20:17 raspberrypi weewx[13193]: cheetahgenerator: using search list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] Mar 14 14:20:17 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 14:20:20 raspberrypi weewx[13193]: cheetahgenerator: Generated 14 files for report StandardReport in 3.38 seconds Mar 14 14:20:20 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 14:20:21 raspberrypi weewx[13193]: imagegenerator: Generated 12 images for StandardReport in 0.71 seconds Mar 14 14:20:21 raspberrypi weewx[13193]: copygenerator: copied 9 files to /var/www/html/weewx Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Running report FTP Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP Mar 14 14:20:21 raspberrypi weewx[13193]: ftpgenerator: FTP upload not requested. Skipped. Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Running report RSYNC Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC Mar 14 14:20:21 raspberrypi weewx[13193]: rsyncgenerator: rsync upload not requested. Skipped. Latest Logs 2017 [try http://www.rsyslog.com/e/2007 ] Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 22:20:00 EDT (1489544400) to database 'weewx.sdb' Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 22:20:00 EDT (1489544400) to daily summary in 'weewx.sdb' Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Running reports for latest time in the database. Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Running report SteelSeries Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/ss/skin.conf for report SteelSeries Mar 14 22:20:15 raspberrypi weewx[13193]: copygenerator: copied 0 files to /var/www/html/weewx/ss Mar 14 22:20:15 raspberrypi weewx[13193]: cheetahgenerator: using search list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 22:20:15 raspberrypi weewx[13193]: cheetahgenerator: Generated 2 files for report SteelSeries in 0.10 seconds Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 22:20:16 raspberrypi weewx[13193]: imagegenerator: Generated 11 images for SteelSeries in 0.78 seconds Mar 14 22:20:16 raspberrypi weewx[13193]: reportengine: Running report StandardReport Mar 14 22:20:16 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/Standard/skin.conf for report StandardReport Mar 14 22:20:16 raspberrypi weewx[13193]: cheetahgenerator: using search list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] Mar 14 22:20:16 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 22:20:17 raspberrypi weewx[13193]: cheetahgenerator: Generated 14 files for report StandardReport in 1.10 seconds Mar 14 22:20:17 raspberrypi weewx[13193]: manager: Daily summary version is 2.0 Mar 14 22:20:18 raspberrypi weewx[13193]: imagegenerator: Generated 12 images for StandardReport in 0.77 seconds Mar 14 22:20:18 raspberrypi weewx[13193]: copygenerator: copied 0 files to /var/www/html/weewx Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Running report FTP Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP Mar 14 22:20:18 raspberrypi weewx[13193]: ftpgenerator: FTP upload not requested. Skipped. Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Running report RSYNC Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Found configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.