Ok...I changed the archive interval to 120...looks good so far. Might be
time for a hardware upgrade.
Thanks for the help!
On Monday, November 8, 2021 at 9:07:57 PM UTC-5 vince wrote:
> There is a LOT enabled on that box if you look at the logs.Long sftp
> session, Windy, PWS, Wundergroun
There is a LOT enabled on that box if you look at the logs.Long sftp
session, Windy, PWS, Wunderground, CWOP, Seasons, Rain Machine extension,
owmap, and the like. You just can't run all that stuff and a too-quick
archive interval on something as weak as a model-B.
On Monday, November 8,
And there is the crux of the issue:
Nov 8 20:03:39 raspberrypi weewx[6055] INFO weewx.engine: Using archive
interval of 60 seconds (software record generation)
Lesser RPis are just fine when used with a reasonable archive interval.
Cutting it to the minimum 60 seconds is asking for trouble.
G
There are lots of ways this can happen. Things to try (or, at least, think
about):
1. I would think that an RPi2 would be enough to run WeeWX + Belchertown.
Check by running a tool such as htop or top. How busy is the processor?
Along the same line, what is your archive interval? If it is short (
Nov 8 20:03:39 raspberrypi weewx[6055] INFO user.gw1000: driver version is
0.4.1
Nov 8 20:03:39 raspberrypi weewx[6055] INFO user.gw1000: GW1000 address is
192.168.20.222:45000
Nov 8 20:03:39 raspberrypi weewx[6055] INFO user.gw1000: poll interval is
15 seconds
Nov 8 20:03:39 raspberrypi wee
Rpi2 with the latest O/S version is probably not enough to run both
belchertown and weewx together. Especially if you have a lot of archive
records to generate the NOAA reports on the first go.
The RPI 4 is readily available and will be a good investment for a nominal
fee. It has at least 2GB (vs
Would like to see a more extensive log extract, I wouldn’t have though a
RPi2 would have that much of a problem with just WeeWX and Belchertown
using a GW1000.
Gary
On Tuesday, 9 November 2021 at 11:02:35 UTC+10 vince wrote:
> I bet if you turn Belchertown off (temporarily) and enable just the
I bet if you turn Belchertown off (temporarily) and enable just the
Standard or Seasons skin that it'll work just fine.
Sometimes you need to throw more compute at the problem.
On Monday, November 8, 2021 at 4:40:00 PM UTC-8 bchap...@gmail.com wrote:
> Raspberry Pi 2 with raspbian buster
>
> Th
Raspberry Pi 2 with raspbian buster
This runs in a cycle of approximately every 6 minutes. Nothing else
running on this machine.
On Monday, November 8, 2021 at 7:35:14 PM UTC-5 tke...@gmail.com wrote:
> Yes, tell us what computer you are using. Also, the operating system and
> version.
>
> On
Yes, tell us what computer you are using. Also, the operating system and
version.
On Mon, Nov 8, 2021 at 4:32 PM vince wrote:
> Your database is locked :-)
>
> Typically this is when you're trying to do too much too fast on a very
> slow box like a pi-zero or the like.
>
> On Monday, November 8,
10 matches
Mail list logo