Ok, thank very much for all suggestions..
Nilton
2012/1/6 Laurence Marks L-marks at northwestern.edu
A guess, which is the best we can do at the moment. See if you can ssh
into the nodes without the .local at the end and if you can then create a
.machines file without the .local and try x
Dear fellows,
thanks for the answers.
2012/1/2 Peter Blaha pblaha at theochem.tuwien.ac.at
model name : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz
stepping: 5
cpu MHz : 1197.000
Are you running at half speed ???
At least on my machines it would indicate the
Dear L. Marks,
I did your suggestions but unfortunately I have no success yet.
2011/12/28 Laurence Marks L-marks at northwestern.edu
Suggestions, assuming that all your computers are dual quadcores:
a) Use as .machines file
1:bodesking.uefs.br:8
1:compute-0-0.local:8
1:compute-0-1.local:8
2012/1/2 Nilton nilton.dantas at gmail.com:
Dear L. Marks,
I did your suggestions but unfortunately I have no success yet.
2011/12/28 Laurence Marks L-marks at northwestern.edu
Suggestions, assuming that all your computers are dual quadcores:
a) Use as .machines file
1:bodesking.uefs.br:8
Betreff: Re: [Wien] I still have problem with wienk in parallel mode
2012/1/2 Nilton nilton.dantas at gmail.com:
Dear L. Marks,
I did your suggestions but unfortunately I have no success yet.
2011/12/28 Laurence Marks L-marks at northwestern.edu
Suggestions, assuming that all your computers
The number of these will tell you how many cores you have (and it
could be twice the true number if hyperthreading is on).
From
http://fixunix.com/redhat/16135-how-determine-linux-real-cpus-vs-hyperthreaded-ht-virtual-cpus.html
a) This should report the total number of physical CPUs:
grep
Dear Marks and Fecher,
I checked the cpu and it is 4 cores without hyperthread. I am running the
tasks in console not with w2web. I checked my dns and it is ok as you can
see below
ping output
[nilton at bodesking ~]$ ping compute-0-0
PING
Sorry, no. The error report you are getting implies a communication error
and ping wont fully check this. Run the ssh command at the end of your
output just at the terminal, with the appropriate exec. It is either this,
or somehow you are losing the sed replacement of the executable name.
model name : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz
stepping: 5
cpu MHz : 1197.000
Are you running at half speed ???
At least on my machines it would indicate the expected cpu MHz of 2400
d) Do cd $WIENROOT ; cp lapw1para lapw1para_hold then edit lapw1para
Dear L. Marks
thanks a lot for the answer. Let's to my comments
2011/12/27 Laurence Marks L-marks at northwestern.edu
It is hard to know as you have not provided us with enough
information, so we can only guess. Most likely is that you have setup
the problem wrong, for instance bad RMTs, bad
Suggestions, assuming that all your computers are dual quadcores:
a) Use as .machines file
1:bodesking.uefs.br:8
1:compute-0-0.local:8
1:compute-0-1.local:8
This will run 3 tasks each using mpi with 8 cores on each computer. If
they are not dual quadcores but only have (for instance) 4 cores
Dear P. Blaha,
sorry but I still have problem with wien in parallel mode.
I try set up the parallel options as you suggested and I got the error
message:
--message from
console--
[nilton at bodesking case]$ run_lapw
It is hard to know as you have not provided us with enough
information, so we can only guess. Most likely is that you have setup
the problem wrong, for instance bad RMTs, bad case.in1c or other. Read
the file lapw1.error to see if it has anything, and also the various
output files. Beyond this:
13 matches
Mail list logo