Title: Message
We are working on a
processing system which uses UDP to receive raw data.The burst data rate
is about 325 MBit/sec andthe packet rateis about 28500 packets/sec.
Our challenge is to receive these data without loosing anything (or as little as
possible). We are using WinPcap
Paal,
no, it's not possible to increase the priority of the WinPcap driver.
Actually, changing the priority is a concept that doesn't make a lot of
sense when talking about drivrs (the packet-capture part of the winpcap
driver runs at DPC level, and therefore has higher priority than any other
Paal Grana wrote:
We are working on a processing system which uses UDP to receive raw
data. The burst data rate is about 325 MBit/sec and the packet rate is
about 28500 packets/sec. Our challenge is to receive these data without
loosing anything (or as little as possible). We are using WinPcap
-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 21. desember 2004 20:23
To: [EMAIL PROTECTED]
Subject: Re: [WinPcap-users] High speed UDP receiver
Paal Grana wrote:
We are working on a processing system which uses UDP to receive raw
data. The burst data rate is about 325 MBit/sec