I am comparing battery to OpenVPN (typical drop do not pass 10% in same
conditions), or without VPN at all - max 7%
During nighttime there is no activity, also i have disabled keep-alives
(PersistentKeepalive) - tried with and without - no big difference.
Sent with ProtonMail Secure Email.
‐‐
May I apply this with your signed-off-by line?
Namely:
Signed-off-by: Alexander von Gluck IV
___
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard
On Fri, Mar 1, 2019 at 11:11 AM Scott Lipcon wrote:
>
> I've been experimenting a bit with Wireguard on several ubuntu systems, and
> am not seeing the performance I'd expect based on the numbers at
> https://www.wireguard.com/performance/
>
> I'm wondering if there is a configuration setting i'
On Fri, Mar 1, 2019 at 11:03 AM kolargol wrote:
> I am testing WG on varius OSes and devices and I have noted severe battery
> drain on iOS (12.2, iPhone 8). Typically battery drops 40% during night-time
> (that is 7 hours of inactivity on the phone) when WireGuard is engaged.
>
Compared to how
I've been experimenting a bit with Wireguard on several ubuntu systems, and
am not seeing the performance I'd expect based on the numbers at
https://www.wireguard.com/performance/
I'm wondering if there is a configuration setting i'm missing or any better
way to debug this.
Testing between two lo
On 28.02.19 19:45, Reuben Martin wrote:
>
>
> That may be a requirement in the context that document was written for.
> But that is not a requirement for wireguard.
wg-quick is also a part of wireguard.
___
WireGuard mailing list
WireGuard@lists.
On 22/2/19 11:05 pm, Emanuele Bernardi wrote:
> I'm very interesting about make it work with dkms, could you please
> explain the process? thanks
> Emanuele
>
> On 22/02/19 00:29, Derrick Lyndon Pallas wrote:
>>
>> I just use DKMS to do it. Check out WireGuard to /usr/src, ln -s
>> WireGuard/src Wi
In case of WireGuard DPKG package being installed, just run:
dpkg-reconfigure wireguard-dkms
This will rebuild the module for the current and latest installed
kernel+headers.
In some cases, kernel package updates even automatically trigger the
rebuild, e.g. on Debian x86 with linux-image-amd
Hi,
please excuse if this is the wrong medium to report this error, but I
couldn't manage to file a bug on Launchpad.
Ubuntu 18.04
4.15.0-45-generic
wireguard-dkms 0.0.20190123-wg1~bionic
wireguard-dkms failed to install properly because the kernel module
coul
Distributed hashtables use overlay routing networks that typically have
between dozens and thousands of peers per node. Suppose it's 480 peers.
Then a node might forward a message between two peers once a minute or
so (using of 2/480), but the mean time between use of a given peer link
could be
I ran into this the other day, simply remove the DNS= line from your conf.
Probably should be documented that wg-quick will barf and tear down your
interface if you have DNS= but not `resolvconf` command.
On Fri, 1 Mar 2019 at 02:46, Reuben Martin wrote:
> On Thu, Feb 28, 2019, 12:29 PM F wrot
On Thu, Feb 28, 2019 at 1:29 PM F wrote:
>
> Learnt how to get WG working here
> https://github.com/StreisandEffect/streisand/issues/1434 and it
> describes how the openresolv package is needed to get WG to connect
> properly. This is not noted in the official WG docs and the average
> person woul
Hi
Thanks for great work with Wireguard, it's fresh breeze of air compared on
years spend on OpenVPN...
I am testing WG on varius OSes and devices and I have noted severe battery
drain on iOS (12.2, iPhone 8). Typically battery drops 40% during night-time
(that is 7 hours of inactivity on the
Hello,
I've been unsuccesful getting WireGuard running on OpenBSD. Any help? I'm trying to create a VPN from my desktop computer to a VPS. Both endpoints are OpenBSD 6.4 amd64. Here's what I've done:
vps# cd /usr/local/src/
vps# git clone https://git.zx2c4.com/wireguard-go
vps# git clone h
14 matches
Mail list logo