Hi Scott,
>From experience, I can tell you I was able to get my Gbit saturated over
Wireguard to a server in a datacenter.
You need to have good routing, obviously.
Greetings,
Christopher Bachner
On Fri, Mar 8, 2019 at 4:41 PM Scott Lipcon wrote:
> Thanks for the suggestions - I'll need to d
Just to provide a followup, in case anyone is interested - The office
router is a Sonicwall TZ 500. Disabling DPI on the zone in question
caused the performance to dramatically increase 655Mbit for no VPN, and
about 600 via Wireguard thanks for the tip to look at the firewall.
Scott
On
Thanks for the suggestions - I'll need to do some more experimentation when
I get back in the office, but I think you're on to something, perhaps with
the router at Location B in my examples.I did a straight UDP speed test
with iperf3, and that worked fine - over 500Mbit/sec - there shouldn't b
On Fri, Mar 1, 2019 at 11:11 AM Scott Lipcon wrote:
>
> I've been experimenting a bit with Wireguard on several ubuntu systems, and
> am not seeing the performance I'd expect based on the numbers at
> https://www.wireguard.com/performance/
>
> I'm wondering if there is a configuration setting i'
I've been experimenting a bit with Wireguard on several ubuntu systems, and
am not seeing the performance I'd expect based on the numbers at
https://www.wireguard.com/performance/
I'm wondering if there is a configuration setting i'm missing or any better
way to debug this.
Testing between two lo
