We have an 11mi link with rocket M365 radios, AirMax enabled, with aggregation
set at 32 frames, with 50KB for the largest frame.
We notice that the link is getting some timed out pings and fluctuating
randomly latency. When aggregation was set at off, we lost all remote
connection with the
Hi Eduardo,
What makes you think that the problem is on the Wireless side of the
radios ?
What other troubleshooting have you done ?
Are you pinging the Radio ? or pinging thru the link ? is the PTP link
setup as a WDS Bridge ?
Have you checked the Ethernet Ports for Duplex or speed
Hello,
This may not be a wireless side problem, but it is a UBNT radio problem.
I recently installed a M365 Powerbridge link and it did the same thing.
The only thing that helped was downgrading to 5.2.1
All newer versions I tried would produce packet loss every 300 or so pings
where you would
Check the forums... this seems to be the problem they're working on in
5.3.3. You can get 5.3.3-RC to see if it helps.
On 07/13/2011 07:24 AM, KevinR wrote:
Hello,
This may not be a wireless side problem, but it is a UBNT radio problem.
I recently installed a M365 Powerbridge link and it did
Just wondering How many are going to join the What's legal, what's
not webinar today?
marlon
WISPA Wants You! Join today!
http://signup.wispa.org/
Current count 161 registered
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer (509-982-2181)
Sent: Wednesday, July 13, 2011 11:05 AM
To: WISPA General List
Cc: Principal WISPA Member List
Subject: [WISPA] FCC 5.4
I plan to.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 11:04 AM, Marlon K. Schafer (509-982-2181)
o...@odessaoffice.com wrote:
Just wondering How many are going to join the What's legal, what's
not webinar
Just another reason to use a real email account!
I can store as much as my hard drive will allow :-)
I forget what it's up to. I used to be able to burn a DVD as a backup, but
that's not enough anymore.
marlon
- Original Message -
From: Josh Luthman
To: WISPA General List
Yeah, I've kept some of those too. Back to 1999.
I keep looking around to see if I can find the original guy that talked me into
trying this wireless thing. I'd like to thank him, or beat him up, depending
on the day. grin
I do remember he talked about having Teletronics gear strung from
Unless it's Thunderbird or Outlook and you have 5GB of emails. Then it
runs slower than molasses in January.
Or Eudora. Or Windows Mail/OE.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 11:36 AM, Marlon K. Schafer
I'd add to the MT column.
I don't run MT boards for my main routers, I use Dell servers with MT software.
3ghz processors, many gigs of ram, as many interfaces of nearly any kind etc.
Never had a lick of trouble with that system, and they basically never running
over single digit processor
Marlon,
I just stumbled on your recent post about the original salesman and
Teletronics' hardware and thought you might have been referring to me!?
Although the Kuwait network wasn't something that I worked on.
I'm still plugging away down here so drop me a line once in a while and let
me
Is it possible to receive slides and/or video from this? I was registered to
watch this, but was pulled away to a conference out of town. The guy I asked to
fill in didn't come through for me.
I'd really like to have access to this info though. Rick, can you help?
--
Blake Covarrubias
On Jul
Hello,
I have posted below in several forums without success, I will appreciate if you
some body can advise me.
Hi,
This is my first post in the forum.( have posted in mikrotik and ddwrt without
any luck )
I wanted to know what antennas users/Pros use for PtP needs.(Apart from UBNT)
Both Flat
I like ARC Wireless, been happy with them. Never heard of Lanbowan or
Jirous.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 3:15 PM, Jawad A Hai ahja...@hotmail.com wrote:
**
Hello,
I have posted below in several
Hmmm, I've not noticed that. No problems here yet.
marlon
- Original Message -
From: Josh Luthman
To: WISPA General List
Sent: Wednesday, July 13, 2011 8:39 AM
Subject: Re: [WISPA] OT: Cleared the Gmail account
Unless it's Thunderbird or Outlook and you have 5GB of
Hello Josh,
What antennas did you use? Flate Panel or Dish (MIMO), ?
What is your Radio that goes with ARC ??
did you get a chance to use other brands beside ARC ?
http://en.jirous.com/antenna-5ghz/jrc-29-dx-pr
http://www.lanbowan.com/products/en_vpro.asp?id=707
From: Josh Luthman
Sent:
May be fixed with newer versions, but I experienced it with Thunderbird and
Eudora years ago and have seen many complaints online and offline.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 3:22 PM, Marlon K. Schafer
Hey there Rick! How the heck are you!
Nope, you were my first sales guy, but the guy that taught me about Teletronics
and locally cost justifiable gear is now lost to me.
I certainly learned a lot from you though!
We're up to 700 or 800 subs here. Still doing it with about 2.5 people. Our
Email pack rat :)
On 7/13/2011 8:36 AM, Marlon K. Schafer (509-982-2181) wrote:
Just another reason to use a real
email account!
I can store as much as my hard
drive will allow :-)
I forget what it's
Flat panel. Mikrotik.
The brands I replaced, for the most part, are unknown to me. I did replace
a pair of little PacWireless dishes but it isn't something comparable (due
to LMR400 runs).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed,
Jawad,
There is no simple answer to this.
You have to take manufactuer specs with a grain of salt as many will skew the
numbers leading you to believe the product is better than it is. The other
issue is that in many cases the product is a re-branded product made by someone
else.
Truth be
Hello Jerry,
Thank YOu for the suggestion.
You have exactly understood my problem, I read specs and bring the product and
test then compare it with other I always had issues.
My main issues is the place where I live I don't have liberty of importing
using direct channels. I have to use
You could potentially start with the standard Rockets. When the GPS units are
more available, you could swap out the AP end and keep the non-GPS units for
spares on the Station end.
- Jerry
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of Jawad A Hai
Sent:
I am interested in finding an alternative way to authenticate all of my
wireless customers. Currently we use pppoe and I would like to get away from
it. I use mikrotik AP's and my network is OSPF routed. I tried using hotspot
mac auth and it worked and still works in some of my AP's but some of
What don't you like about radius? MT can do straight MAC auth through radius
on the wireless interface. I'm not real sure how your radius server is going
to provision anything if it isn't doing the authentication. What are you
using as a billing/provisioning platform?
Cameron
Cameron
On Wed,
I like radius I am just having some random issues with pppoe. I do not want to
get away from radius. I use Platypus ISP billing and Vircom Radius.
Joshua S. Bowsher
Director of Internet Services
Midwaynet.net
Midway Electronics
NWIIS a division of MidwayNet, LLC
1250 N McKinley Ave
Rensselaer,
What do you want Radius to do if you're not using PPPOE (assuming it's all
wireless customers)?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 5:39 PM, Josh Bowsher jbows...@midwaynet.netwrote:
I like radius I am just
Profiles for speed and specifiying IP pools or addresses.
Joshua S. Bowsher
Director of Internet Services
Midwaynet.net
Midway Electronics
NWIIS a division of MidwayNet, LLC
1250 N McKinley Ave
Rensselaer, IN 47978
Office 219-866-7946 ext: 212
Cell 219-863-0678
Radius can do authentication and provisioning...keep poeple off the network
who don't belong, set up queues, assign IP's, set up rules to redirect
non-paying customers, etc. It can be a fantastic tool when used properly.
It's not jsut for PPPOE.
Cameron
On Wed, Jul 13, 2011 at 4:42 PM, Josh
How do you get it to provide rate limits and ip addresses outside of
PPPoE, last time I looked if you were doing MAC Auth out of radius you
couldn't pass IP and queues, it has been a while though so this may have
changed.
On 7/13/11 4:46 PM, Cameron Crum wrote:
Radius can do authentication
I understand that and so I am reaching out for ideas on how to use it with
mikrotik and without pppoe.
Joshua S. Bowsher
Director of Internet Services
Midwaynet.net
Midway Electronics
NWIIS a division of MidwayNet, LLC
1250 N McKinley Ave
Rensselaer, IN 47978
Office 219-866-7946 ext: 212
Cell
With profiles in the profiles.txt file. You can specify rate limits and IP
pools I do it currently but I use the hotspot mac auth in the mikrotik AP's
Joshua S. Bowsher
Director of Internet Services
Midwaynet.net
Midway Electronics
NWIIS a division of MidwayNet, LLC
1250 N McKinley Ave
So you don't want to use hotspot or pppoe, but do want to use RADIUS?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 5:49 PM, Josh Bowsher jbows...@midwaynet.netwrote:
With profiles in the profiles.txt file. You can
Yes that's exactly what I am after.
Joshua S. Bowsher
Director of Internet Services
Midwaynet.net
Midway Electronics
NWIIS a division of MidwayNet, LLC
1250 N McKinley Ave
Rensselaer, IN 47978
Office 219-866-7946 ext: 212
Cell 219-863-0678
www.midwaynet.nethttp://www.midwaynet.net/
You don't need hotspot or pppoe. I have customers using straight mac auth
through radius (Freeradius) and the radius passes back whatever attributes
are in either the radreply or radgroupreply tables.
Cameron
On Wed, Jul 13, 2011 at 4:57 PM, Josh Luthman
j...@imaginenetworksllc.comwrote:
So
What are your CPE? If you're using MikroTik you can also control rate limits in
addition to device authentication. You can assign IPs via RADIUS, but you will
have to start allocating IP blocks to AP's, or to a router at a tower site
which feeds multiple AP's. IP assignment in MikroTik's RADIUS
Using EAP?
On Jul 13, 2011 6:02 PM, Cameron Crum cc...@wispmon.com wrote:
You don't need hotspot or pppoe. I have customers using straight mac auth
through radius (Freeradius) and the radius passes back whatever attributes
are in either the radreply or radgroupreply tables.
Cameron
On Wed,
yeah, that will be helpful if Slides are published on WISPA web site
somewhere.
The slides had some useful links to FCC Knowledge base documents.
I made the mistake of logging in at the last minute assuming gotomeeting
wouldn;t require any updates since I've used it before, but missed the first
Exactly my thought when I read the original post. Aren't you already
doing authentication in RADIUS? What are you really trying to
accomplish with authentication?
On 7/13/2011 5:37 PM, Cameron Crum wrote:
What don't you like about radius? MT can do straight MAC auth through
radius on the
Use DHCP with radius auth and attributes to set your shaping queues, etc...
Eric
On Jul 13, 2011 6:00 PM, Josh Bowsher jbows...@midwaynet.net wrote:
Yes that's exactly what I am after.
Joshua S. Bowsher
Director of Internet Services
Midwaynet.net
Midway Electronics
NWIIS a division of
Those are the two clients I use. My Outlook probably has about 5
GB, but my Thunderbird probably has 30 GB.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
On 7/13/2011 10:39 AM, Josh Luthman wrote:
Unless it's Thunderbird or Outlook and
Versions? What storage or access method (imap, pop)?
On Jul 13, 2011 8:29 PM, Mike Hammett wispawirel...@ics-il.net wrote:
Those are the two clients I use. My Outlook probably has about 5 GB,
but my Thunderbird probably has 30 GB.
-
Mike Hammett
Intelligent Computing Solutions
I'm doing straight MAC auth with MT and nothing else. Today I noticed an
intruder who cloned a client's NS2 MAC address and it looks like it did
a ipscan to get a customer's ip address and access the internet...
That's the only tower I have without WEP key... I have all towers with
mac auth
+1
On Wed, Jul 13, 2011 at 3:20 PM, Josh Luthman
j...@imaginenetworksllc.comwrote:
I like ARC Wireless, been happy with them. Never heard of Lanbowan or
Jirous.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 3:15
Just noticed the subject was ptp. What kind of distances? Panels are not a
great choice a lot of the time.
On Jul 13, 2011 10:23 PM, RickG rgunder...@gmail.com wrote:
+1
On Wed, Jul 13, 2011 at 3:20 PM, Josh Luthman
j...@imaginenetworksllc.comwrote:
I like ARC Wireless, been happy with
I'll save Chuck from having to type this again: http://www.ubnt.com/stock
:P
On Wed, Jul 13, 2011 at 3:56 PM, Jawad A Hai ahja...@hotmail.com wrote:
**
Hello Jerry,
Thank YOu for the suggestion.
You have exactly understood my problem, I read specs and bring the product
and test then
IMAP for everything, no POP at all. I am interested to give MAPI a try
once I finish getting my new Zimbra cluster online.
Outlook 2010 and ThunderBird... whatever the latest one is. It
restarted for an update the other day.
-
Mike Hammett
Intelligent Computing Solutions
We have an 11mi link with rocket M365 radios, AirMax enabled, with aggregation
set at 32 frames, with 50KB for the largest frame.
We notice that the link is getting some timed out pings and fluctuating
randomly latency. When aggregation was set at off, we lost all remote
connection with the
Major difference, most everyone used POP years ago. Probably the cause of
the issues.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 10:39 PM, Mike Hammett wispawirel...@ics-il.netwrote:
**
IMAP for everything, no POP
I have a Powerbridge 365 link. I left it all default in terms of advanced
wireless config. Works just fine.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Jul 13, 2011 at 11:01 PM, Eduardo edua...@webjogger.net wrote:
**
We have an
51 matches
Mail list logo