Re: [WISPA] 5.8 Separation

I’ve been putting two radios into my MT AP’s for a couple of years now. Nearly every site has 2.4 and 5 gig. No problems that I know of. Even with the sectors within a couple of feet of each other. marlon From: Clay Stewart Sent: Tuesday, August 13, 2013 11:14 AM To: WISPA General List Sub

Re: [WISPA] 5.8 Separation

I wouldn't bother too much with it, two different bands that aren't even harmonic. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Aug 13, 2013 at 2:14 PM, Clay Stewart < cstew...@stewartcomputerservices.com> wrote: > In extending this thr

Re: [WISPA] 5.8 Separation

In extending this thread... what about a 5.8 Dishes with a 2.4 Dish (Rockets). I want to add a 2.4 rocket dish where I have several 5.8 RDs and PowerBridges 5.8... problem being space, I need to put dish within 2' - 3' of 5.8 dishes. On Tue, Aug 13, 2013 at 2:07 PM, Marlon Schafer (509.982.2181) <

Re: [WISPA] 5.8 Separation

A good rule of thumb is at least 10’ vertical or 20’ horizontal between anything in the same band. Further is better . marlon From: ~NGL~ Sent: Thursday, August 08, 2013 4:37 PM To: WISPA General List Subject: [WISPA] 5.8 Separation We have the following setup: Tower 1 = Tranzeo TR-5 plus A

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

Maybe a UBNT dish with a RF Armor Shield... some need to test that combo Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scott Carullo Sent: Tuesday

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

Would probably work, and cost a thousand less, but it needs to be spec'd and licensable. Its crossed my mind more than once though. Scott Carullo Technical Operations 855-FLSPEED x102 From: "Gino Villarini" Sent: Tuesday, August 13, 2013 8:52 AM To:

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

Sounds like Matt and the wrong size RF armor all over again. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 13, 2013 8:51 AM, "Gino Villarini" wrote: > Use a 5 ghz? Lol!!! > > ** ** > > Gino A. Villarini > > g...@aeronetpr.com >

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

I bought one beehive 11Ghz antenna set. I have them on my floor. I'll sell them really cheap - I'll never hang another set of those as long as I'm in business. Looks like they were a science fair project made in a garage. Scott Carullo Technical Operations 855-FLSPEED x102 -

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

The way they assemble (takes over an hour - too many parts to crud up over time etc)The way the wave guide is held to the rear, worst design I've come across yetHow small the mounting bracket is compared to radio waves and othersand so on in general... Scott Carullo Technical Operations 855-FLS

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

Use a 5 ghz? Lol!!! Gino A. Villarini g...@aeronetpr.com Aeronet Wireless Broadband Corp. 787.273.4143 From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, August 13, 2013 8:48 AM To: WISPA General List Subject: R

Re: [WISPA] Any suggestions for a 6Ghz 3ft dish with N connector single pol

No 3 foot in that band. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Aug 13, 2013 1:12 AM, "Sean Heskett" wrote: > Check with wbmfg.com > > Sean > > On Monday, August 12, 2013, Scott Carullo wrote: > >> I need to find something different than