I have had good luck moving back to bridging as well.
I'm REALLY not looking forward to that!
marlon
- Original Message -
From: "Mark McElvy"
To: "WISPA General List"
Sent: Thursday, November 19, 2009 2:39 PM
Subject: Re: [WISPA] Intermittant connectivi
netstat -a might show you 4billion connections?
ryan
On Thu, Nov 19, 2009 at 2:39 PM, Mark McElvy wrote:
> Ok, I went out the problem customer and switched them to bridged mode
> and set their router to do PPPoe and ShaZam, all is good. Why is this
> only happening with some of the CPQ's and not
pa.org] On
Behalf Of Mark McElvy
Sent: Thursday, November 19, 2009 5:40 PM
To: WISPA General List
Subject: Re: [WISPA] Intermittant connectivity
Ok, I went out the problem customer and switched them to bridged mode
and set their router to do PPPoe and ShaZam, all is good. Why is this
only happening
Ok, I went out the problem customer and switched them to bridged mode
and set their router to do PPPoe and ShaZam, all is good. Why is this
only happening with some of the CPQ's and not all?
Thanks Marlon.
Mark McElvy
AccuBak Data Systems, Inc.
-
a.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer
Sent: Monday, November 16, 2009 8:09 PM
To: WISPA General List
Subject: Re: [WISPA] Intermittant connectivity
509.988.0260
I'll tell you though, trees are a no no. ESPECIALLY with such low
signal
levels. I've found tha
nal
> levels. I've found that anything less than about -85 won't be stable. I
> try really hard to stay closer to -75.
> marlon
>
> - Original Message -
> From: "Mark McElvy"
> To: "Mikrotik discussions" ;
> ; "WISPA General Li
To: "Mikrotik discussions" ;
; "WISPA General List"
Sent: Monday, November 16, 2009 2:36 PM
Subject: [WISPA] Intermittant connectivity
> Here we go again... referring to the frustrating install customer issue.
>
>
>
>
> It basically comes down to intermittent ability
Here we go again... referring to the frustrating install customer issue.
It basically comes down to intermittent ability to ping the AP
interface, pings for a bit then time out for a bit, then starts replying
again. First noticed the issue with a new install on an AP I have not
added a custome
