Re: [WISPA] POE splitter for ToughSwitch

Thanks for the feed back. Will be re-evaluating the installs. Rick - Rick Boucher Webmaster / Systems Admin Orcas Online / San Juan Web (360) 376-6411 http://www.orcasonline.com http://www.sanjuanweb.com The information source for the San Juan

Re: [WISPA] POE splitter for ToughSwitch

I almost switched to the UBNT Infinity. So you're liking them Clay? On Fri, Sep 29, 2017 at 9:34 AM, Clay Stewart wrote: > Opposite experience here. Then a lot has changed in last few years, like > the latest> https://www.ubnt.com/edgemax/edgerouter-infinity/ > > The

Re: [WISPA] POE splitter for ToughSwitch

I like the Edgepoints but it's hard to give up Netonix switches! On Fri, Sep 29, 2017 at 8:39 AM, Clay Stewart wrote: > Consider an EdgePoint, we have not lost one and have deployed many. > Powered by cat5 or wires. A real switch. > > On Thu, Sep 28, 2017 at 6:47 PM,

Re: [WISPA] POE splitter for ToughSwitch

Rick, on your issue, the ToughSwitch is a UBNT failed product in my opinion. They do not hold up with ESDs or worse, and have issues with Flow Control. No company has a perfect line of products, there is always going to be one need improvement here and there, or dropped. The EdgePoints are

Re: [WISPA] POE splitter for ToughSwitch

I for one am disappointed in the new switches and routers. My head is full of command line commands and options from decades of different devices and OSs. I want GUIs from now on! And I want the same look and feel across Ubiquiti devices! On Fri, Sep 29, 2017 at 9:34 AM, Clay Stewart

Re: [WISPA] POE splitter for ToughSwitch

Opposite experience here. Then a lot has changed in last few years, like the latest> https://www.ubnt.com/edgemax/edgerouter-infinity/ The biggest issue I have seen over the years is people not learning the CLI and resulting capability. On Fri, Sep 29, 2017 at 9:02 AM, David Funderburk

Re: [WISPA] POE splitter for ToughSwitch

How long have you had the EdgePoint in service? We had deployed a number of Ubiquiti routers but ended up pulling them all out. Once they were in service a little over a year we had MANY ghost issues crop up with them. Our latency went down and stability went up after removing them. Regards,

Re: [WISPA] POE splitter for ToughSwitch

Consider an EdgePoint, we have not lost one and have deployed many. Powered by cat5 or wires. A real switch. On Thu, Sep 28, 2017 at 6:47 PM, Rick Boucher wrote: > Looking for a good POE splitter to power up a ToughSwitch POE on n install > about 75ft up. > > Source

[WISPA] POE splitter for ToughSwitch

Looking for a good POE splitter to power up a ToughSwitch POE on n install about 75ft up. Source inserts power at base (in house) then powers ToughSwitchPOE on Roof. ToughSwitch then powers 4 UBNT 24V devices (maybe 5) Anyone using a good splitter for powering the TSPOE? Rick