://www.shelbybb.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 10:26 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Uhh...
http://ubnt.com/products/nano.php
Nanos have a reset
I've got a bunch of Tranzeo CPE CPQ units that are bad for one
reason or another. I'm considering repairing them but not sure of the
most economical way to do so.
I could stick a bullet in there but will need a reverse MMCX to NF cable?
Alternatively, I could throw in another radio card of some
Sent: Thursday, August 27, 2009 12:00 PM
To: WISPA General List
Subject: [WISPA] Tranzeo repair
I've got a bunch of Tranzeo CPE CPQ units that are bad for one
reason or another. I'm considering repairing them but not sure of the
most economical way to do so.
I could stick a bullet
[mailto:wireless-boun...@wispa.org] On Behalf
Of RickG
Sent: Thursday, August 27, 2009 1:00 PM
To: WISPA General List
Subject: [WISPA] Tranzeo repair
I've got a bunch of Tranzeo CPE CPQ units that are bad for one
reason or another. I'm considering repairing them but not sure of the
most economical way
27, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided. Turn it
on. Your lights of coarse wont be there unless you mount the board kind
: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided. Turn it
on. Your lights of coarse wont be there unless you mount the board kind of
weird but that should work for $60
Steve Barnes
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Thursday, August 27, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in some
Adhesive Connectors plug-in the RJ
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Thursday, August 27, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out
: Thursday, August 27, 2009 2:31 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Am I the only one that simply can't stand the Tranzeo enclosures? I have
had nothing but hell with that awful growth looking lump on the back.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne
Sent: Thursday, August 27, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided.
Turn
it
on. Your lights
-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 3:53 PM
To: bcl...@spectraaccess.com; WISPA General List
Subject: Re: [WISPA] Tranzeo repair
We experimented with Tranzeo several years ago. There is one 5ghz CPE
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 3:53 PM
To: bcl...@spectraaccess.com; WISPA General List
Subject: Re: [WISPA] Tranzeo repair
We experimented with Tranzeo several years ago. There is one 5ghz CPE
that's
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 4:15 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Best way...if this wasn't
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Best way...if this wasn't a public list.
We almost left the idea of a WISP behind because every good rainstorm or
few
we'd lose a Tranzeo AP. Water some how managed to get in that stupid bump.
I just threw the last one out a few
, 2009 4:15 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Best way...if this wasn't a public list.
We almost left the idea of a WISP behind because every good rainstorm or
few
we'd lose a Tranzeo AP. Water some how managed to get in that stupid bump.
I just threw the last one
This is true for me as well. I haven't seen a seal fail, and I do not
over-tighten the nuts. However, I HAVE had several fail after hail
knocks a hole in the top of the cover, and then over time, water is
funneled into the radio. I have found a couple of radios that were half
full of water (or
Everything just hates me it seems :(
On 8/27/09, J. Vogel jvo...@vogent.com wrote:
This is true for me as well. I haven't seen a seal fail, and I do not
over-tighten the nuts. However, I HAVE had several fail after hail
knocks a hole in the top of the cover, and then over time, water is
We have over 600 hundred Tranzeo's installed as AP's, CPE's and Backhaul.
So far our biggest problem has been lightening, but no problem with water
unless someone left off the black thingy and tried to seal it with RTV.
Of course we are in New Mexico where it only rains 12 inchs a year, but
I guess us around here must have been over tightening it or something, huh...
On 8/27/09, Phil Curnutt pcurn...@gmail.com wrote:
We have over 600 hundred Tranzeo's installed as AP's, CPE's and Backhaul.
So far our biggest problem has been lightening, but no problem with water
unless someone
As for lightning, I've thought that replacing the radio card with one
with the appropriate atheros chipset might be effective. mini-pci IIRC.
Never have done it, though.
Bob
Josh Luthman wrote:
I guess us around here must have been over tightening it or something, huh...
On 8/27/09, Phil
: Thursday, August 27, 2009 12:00 PM
To: WISPA General List
Subject: [WISPA] Tranzeo repair
I've got a bunch of Tranzeo CPE CPQ units that are bad for one
reason or another. I'm considering repairing them but not sure of the
most economical way to do so.
I could stick a bullet
, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided. Turn
it
on. Your lights of coarse wont be there unless you mount the board kind
: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Steve Barnes
Sent: Thursday, August 27, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in some
Adhesive Connectors
General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in
some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided.
Turn
it
on. Your lights of coarse wont be there unless you mount the board
kind
419-562-6405
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 4:15 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Best way...if this wasn't a public list
...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 10:26 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Uhh...
http://ubnt.com/products/nano.php
Nanos have a reset button, too.
Josh Luthman
Office: 937-552-2340
Direct: 937-552
And they need it :-)
Nanos have a reset button, too.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
WISPA Wants You! Join today!
...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 3:31 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Am I the only one that simply can't stand the Tranzeo enclosures? I
have
had nothing but hell with that awful growth looking lump on the back.
Josh Luthman
Office: 937
:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in
some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided.
Turn
it
on. Your lights of coarse wont be there unless you mount
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in
some
Adhesive Connectors plug-in the RJ-45 Connector Tranzeo Provided.
Turn
it
on. Your lights of coarse wont be there unless you mount the board
kind
...@wispa.org [mailto:wireless-boun...@wispa.org]
On
Behalf Of Steve Barnes
Sent: Thursday, August 27, 2009 1:21 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Consider Mikrotik RB411r $55 UFL Pull out Tranzeo Board, drop in
some
Adhesive Connectors plug-in the RJ
Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Josh Luthman
Sent: Thursday, August 27, 2009 10:26 PM
To: WISPA General List
Subject: Re: [WISPA] Tranzeo repair
Uhh...
http://ubnt.com/products/nano.php
Nanos have a reset button, too.
Josh
32 matches
Mail list logo
