ge-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mark Nash
Sent: Wednesday, March 04, 2009 9:15 AM
To: WISPA General List
Subject: [WISPA] XR3 / StarOS / Pac Wireless
We've seen a drop in signal on all of our connections off of one AP.
In the beginning, co
st
> 78 Centennial Loop
> Suite E
> Eugene, OR 97401
> 541-998-
> 541-998-5599 fax
> http://www.unwiredwest.com
> - Original Message -
> From: "Jerry Richardson"
> To: "WISPA General List"
> Sent: Wednesday, March 04, 2009 9:23 AM
>
Richardson"
To: "WISPA General List"
Sent: Wednesday, March 04, 2009 9:23 AM
Subject: Re: [WISPA] XR3 / StarOS / Pac Wireless
> One AP with one radio or multiple radios in the same AP?
>
> First thought is a wet connector to tha antenna
>
>
>
>
> __
Of Mark Nash
Sent: Wednesday, March 04, 2009 9:15 AM
To: WISPA General List
Subject: [WISPA] XR3 / StarOS / Pac Wireless
We've seen a drop in signal on all of our connections off of one AP.
In the beginning, connections were at -70(ish) for all CPEs. Now
they're at -85(ish) and
We've seen a drop in signal on all of our connections off of one AP.
In the beginning, connections were at -70(ish) for all CPEs. Now they're at
-85(ish) and not really usable.
We've replaced several boards & radio cards ($250 a pop for one of these
radios), both at the AP and at the client
TED] [mailto:[EMAIL PROTECTED] On
>> Behalf Of Randy Cosby
>> Sent: Friday, August 29, 2008 6:46 PM
>> To: [EMAIL PROTECTED]; WISPA General List
>> Subject: Re: [WISPA] XR3
>>
>> What did the sticker say with the card? Mine said to bump it 2.0GHz, so
>> 5.540 = 3.54
; WISPA General List
> Subject: Re: [WISPA] XR3
>
> What did the sticker say with the card? Mine said to bump it 2.0GHz, so
> 5.540 = 3.540. That worked for me. Following the instructions in the
> forum did not.
>
>
>
> [EMAIL PROTECTED] wrote:
> > Anyo
What did the sticker say with the card? Mine said to bump it 2.0GHz, so
5.540 = 3.540. That worked for me. Following the instructions in the
forum did not.
[EMAIL PROTECTED] wrote:
> Anyone using the XR3/ 20mhz spacing on the list? The conversion table says
> Channel B real 5770Mhz equals 3
Anyone using the XR3/ 20mhz spacing on the list? The conversion table says
Channel B real 5770Mhz equals 3663 Mhz but 5770 is not selectable unless the
card is in 5 or 10 mhz channels? What gives?
John Buwa
Michiana Wireless
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL