Hi,
We’ve had an issue with AIR-CAP2702I’s doing this, the issue was they were
presenting 2 MAC addresses, the one on the sticker, and the next on in the
sequence; it’s this next in sequence which was requesting DHCP.
We had to register two MACs for each AP for DHCP. Once the AP has updated its
It can't, but can be connected to a PSK network.
We found that in certain halls and other high density use areas we had very
high channel utilisation with 1 & 2mbs enabled, so disabling the them might
have upset a couple of Wii's (literally a couple) but it's a small price to
pay, channel utili
You can run a report from within NCS (and no doubt WCS) to give you all users
using a particular connection protocol, eg 802.11b.
Navigate to...
Reports > Report Launch Pad > Client > Unique Clients > Unique Clients Report
Details
Then select 'All' for 'Report by' and 'Report Criteria', then sele
Unless something has changed then I understand this is the way to do it if you
intend to use Band Select, as Band Select makes it mandatory for all
bands/Radio Policies to be enabled.
So you enable all Radio Policies (inc .11b), but disable the .11b speeds.
>From the footnotes of WLAN > 'SSID Na