Tim,
First and foremost, if you have WCS, then have a look at the event log and it
will have the detailed information on why the AP's are changing channels. Also,
WCS, Monitor, RRM will provide an overview of why AP's are changing.
Based on my experience, here are a few idea.
1) Upgrade to
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 25/01/2010 17:31, Garry Peirce wrote:
On the controller: Wireless..802.11x...RRM..DCA...'DCA Channel
sensitivity'
On the same settings page we also changed Channel Assignment
Method... Interval: from 10 minutes to 1 hour, which seems to have
Tim,
What WCS report did you run to get these up/down events?
Thanks,
Bruce T. Johnson | Network Engineer | Partners Healthcare
Network Engineering | 617.726.9662 | Pager: 31633 | bjohns...@partners.org
-Original Message-
From: Timothy Payne [tpay...@macalester.edu]
Received:
You might open a TAC case as all scenarios are different, perhaps especially
when it comes to RRM.
But as your issue sounds similar to one I had when upgrading my controllers
this past October, you might check your DCA sensitivity.
The threshold for channel changes was lowered at one point making
