EDU
Subject: Re: [WIRELESS-LAN] Vista Wireless Networking...
Justin-
I did run a D-Link USB adapter with Vista beta and the Cisco LWAPP
stuff- 802.1x/PEAP MSCHAP v2/TKIP- no problems at all.
Lee Badman
Lee Badman
Network/Wireless Engineer
Syracuse University
315 443-3003
[EMAIL PROTECTED] 1/2
Our Wireless adapter is a Linksys connecting via
802.1x/EAP-PEAP/MSChapv2 and MS IAS. No problems
Mike
-Original Message-
From: Lee Badman [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 25, 2007 2:54 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] Vista
Justin-
I did run a D-Link USB adapter with Vista beta and the Cisco LWAPP
stuff- 802.1x/PEAP MSCHAP v2/TKIP- no problems at all.
Lee Badman
Lee Badman
Network/Wireless Engineer
Syracuse University
315 443-3003
>>> [EMAIL PROTECTED] 1/25/2007 10:12 AM >>>
Well I'm just about at my wits end here
If you're using freeradius it requires an update. I think 1.1.4 is the
level needed.
It has something to do with the way Vista handles SSL.
Mearl
-Original Message-
From: Justin Aharoni [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 25, 2007 9:12 AM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE
Hi Justin,
Have you tried this:
http://www.belkin.com/support/article/?lid=en&pid=F5D7050&aid=5973&scid=0
If so:
What configuration are you using? WEP/WPA/802.1X? Have you tried connecting
without encryption?
What AP are you using? Does the log of the AP show anything usefull?
Regards,
Tom R
Quick question,
What's your radius server?
**
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
Michael,
Wish that was it. We are using the Cisco LWAPP setup and I just enabled
the IPv6 option on the controller to no avail. Other than that we have
no ACL's on our AP's. I've also tried disabling the IPv6 option in the
properties of the wireless card and that didn't work either.
Thanks,
Got ACLs on the APs?
Vista appears to use DHCPv6. Changes are in RFC 3315.
http://www.faqs.org/rfcs/rfc3315.html
In our case, the DHCP responses were being blocked by ACLs on the
APs. No other OSs were affected.
Our setup has two routers on each VLAN, '.3 and '.4. They HSRP for
'.1 and both
Mike,
What kind of card are you using?
I did read an article just now about USB Wireless not natively supported
in Vista. Not sure if this is still true or not.
Justin
Ruiz, Mike wrote:
Justin,
We've been in testing with Vista for a while now and no one has
experienced similar issues. Sorr
Justin,
We've been in testing with Vista for a while now and no one has
experienced similar issues. Sorry.
Cheers,
Mike
-
Michael G. Ruiz H'99 ESSE, ACP, A+
Network and Systems Engineer
Hobart and William Smith Colleges
Information Technology Services
v.315.781.3711 f.315.781.3409
[EMAIL PROTECT
10 matches
Mail list logo
