Hi Joe -
> 17.WSJT + kvasd (SFM no ntest) 897
I can’t reproduce this test. Whenever I try to run kvasd using my metrics, I
get no decodes. I have tried this using WSJT10 and WSJT-X. I have commented out
the ntest/nlow check and also the birdie test. At these low SNR’s, my metrics
wil
On 25/09/2015 17:42, Steven Franke wrote:
Hi Steve,
split mode on the rig should be switched off when entering WSPR mode. If
this is not happening then something is not right.
Can you ask him to try setting "Split Operation" to "None" in
"Settings->Radio" and try WSPR like that.
73
Bill
G4W
One more from Rick VK6XT.
>
> Hi Steve,
> Another couple of things I have noticed:- In wspr mode,
> frequency split on the rig does not occur until the First TX cycle.
>In JT65 mode the frequency split at 1410Hz is only -250Hz not
> the -500Hz that occurs in wspr m
All,
Forwarding this report from Rick, VK6XT.
Steve k9an
> On Sep 25, 2015, at 3:38 AM, Rick Hill <6xrayta...@gmail.com> wrote:
>
> Hi Steve,
> I know this is not the correct way to input feedback But I have
> lost the correct path. I am experiencing problems with Split operation.
Hi Steve,
Sorry, no -- you'll have to comment out those calls, or the equivalent.
-- Joe
On 9/25/2015 11:26 AM, Steven Franke wrote:
> Joe -
>
> Is there an external way to turn off the attempts to decode the average in
> WSJT10? Not a big deal - I’m sure that I can figure out how to ch
Joe -
Is there an external way to turn off the attempts to decode the average in
WSJT10? Not a big deal - I’m sure that I can figure out how to change the code
to turn it off. As it stands, the program is calling the decoder to attempt to
decode the averaged signal immediately after it tries t
Hi Steve,
Just a quick reply, after reading your thoughtful comments. Your
thinking about what to try next is very similar to mine -- in
particular, making use of the second-best symbol value as a substitute
for simple erasures.
I should have mentioned that I in my tests with ntrials=10^5 and
You might consider trying the geometric mean. Multiple probabilities
should be normalized quite likely in this situation.
Mike W9MDB
On Fri, Sep 25, 2015 at 8:34 AM, Steven Franke
wrote:
> Hi Joe -
> Thanks for the new results! Getting ready for class here - so just a quick
> note. Your results
I submitted this earlier (I think) but never heard much feedback.
Somebody else asked for something like this recently.
This patch adds 3 sounds to WSJT-X.
#1 Runaway watchdog
#2 Transmit
#3 Message (in Rx Frequency windows NOT CQ and NOT your call sign).
I've found these quite useful.
The Runaw
Hi Joe -
Thanks for the new results! Getting ready for class here - so just a quick
note. Your results, though more extensive than mine, point in the same
direction. As it stands, sfrsd seems to be around 0.5 dB shy of kvasd. I have a
long list of ideas to try to do better - but it will take ti
Hi Steve and all,
I've added more lines to the table summarizing my tests of decoding
weak, isolated JT65A signals. As before, the final number on each line
is the number of valid decodes from a thousand files at
S/N=-24 dB.
1. WSJT-X (BM only) 2
2. WSJT (BM only)
Hi All,
There is an incorrect tootip in cbEME button when used as "Automatic
sequence" in wsjtx_exp r5926
Can be adopted something as in this patch?
73
Sandro
IW3RAB
*** mainwindow.cpp 2015-09-25 12:52:02.969355900 +0200
--- mainwindow.xxx 2015-09-25 12:48:46.228446200 +0200
***
12 matches
Mail list logo
