In jt65_decode.f90 seems there are some dead code sections.
iused -- not usedLine 404-408 appears to be useless as the variables inside the
loop are never referred to again. Leftovers, perhaps?
de Mike W9MDB
--
What NetFl
Forgot to post that I'm using WSJT-X Version 1.7 r7005, feeding the K3
Line Input.
73, Jim K9YC
On Sat,8/13/2016 9:25 AM, Jim Brown wrote:
> I'm running K3 using default settings for audio, VOX, Data Mode. Tried
> MSK144 for the first time this morning, copied AA0N on 5 sec, tried to
> call him.
I'm running K3 using default settings for audio, VOX, Data Mode. Tried
MSK144 for the first time this morning, copied AA0N on 5 sec, tried to
call him. TX audio drops after 1 sec.
Changed to 10 sec, still drops after 1 sec. Switched to JT65, audio
drops after 1 sec. Also drops after 1 sec if I
Ok, ran a couple of stations and here is what I have found.
The transmit frequency shift happens on both SH or no SH.
It happens when using Auto Seq. to shift to the next TX sequence
It happens if you double click on a line in the Band activity list to start
calling a station or advanced to nex
I am not running split. Split operation is set to None. I am set up using DX
Lab Commander for radio control and PTT. Radios is a Flex 6500 for 6 meters
and a Yaesu FT-991 for 2 meters. I have noticed this audio shift in both
radios.
73 Jay KA9CFD
-Original Message-
From: Bill Somerville
I am currently using r7026 that I built from sourceforge using JTSDK. Using
Windows 10 64 bit.
I will have to monitor a bit to answer your other questions.
73 Jay KA9CFD
-Original Message-
From: Steven Franke [mailto:s.j.fra...@icloud.com]
Sent: August 13, 2016 13:30
To: Joe Taylor
Su
On 13/08/2016 14:30, Steven Franke wrote:
> Any other details, or, ideally, a prescription for reproducing the behavior
> reliably, would be helpful.
Hi Jay, Steve & all,
Do you have "Settings->Radio->Split Operating" set to something other
than "None"? It is possible that the logic to keep HF
Hi Jay,
Steve, K5DOG and Randy, WB8ART have reported this behavior too. The entire
spectrum is shifted up by 500 Hz when this happens. I have seen it happen on
Steve’s signal, and I have a wav file that illustrates the behavior.
The answers to the following questions will help us figure out wh
I have been working a few people using MSK144 mode. We have noticed there is
a slight upward change in the audio frequency that is transmitted when the
next transmit sequence is automatically selected using Auto sequencing.
Then the next time it transmits, the transmit audio is back to normal. Has
