Re: [wsjt-devel] JT65+JT9 mode: blue delimiter reset to zero

2017-04-30 Thread Black Michael
Prevent saving Fmin=0 to settings. https://www.dropbox.com/s/zgm9maoy5b2e3ap/widegraph.patch?dl=1 de Mike W9MDB-- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sd

Re: [wsjt-devel] UTC

2017-04-30 Thread Black Michael
Why?  Either way is ISO8601. de Mike W9MDB From: Pino Zollo To: wsjt-devel@lists.sourceforge.net Sent: Sunday, April 30, 2017 5:30 PM Subject: [wsjt-devel] UTC Suggestion: Print the times in the UTC column with a colon between hours and minutes. e.g. instead of print 22:22 T

[wsjt-devel] WSJT-X suggestion for change

2017-04-30 Thread joseph kasser
G’day I’ve been playing with the software (1.7.0) for the last few days. May I suggest the following change The use case is: i hear a CQ, I call the station and he replies to someone else. I see that on the frequency and then my systems kicks in and calls him again before i can disable the tran

[wsjt-devel] UTC

2017-04-30 Thread Pino Zollo
Suggestion: Print the times in the UTC column with a colon between hours and minutes. e.g. instead of print 22:22 TU de Pino ZP4KFX -- Check out the vibrant tech community on one of the world's most engaging tech

Re: [wsjt-devel] ALL.TXT in MSK144 mode

2017-04-30 Thread Rich Griffiths
I hope someone has already answered you directly - I haven't seen an answer posted to the list server. In any case, here's what I know of the messages. 094745 - the start time for the current MSK144 decoding sequence -4 - the signal to noise ratio in dB 0.7 - the time in seconds since the sta

Re: [wsjt-devel] JT65+JT9 mode: blue delimiter reset to zero

2017-04-30 Thread Claude Frantz
On 04/30/2017 03:40 PM, Black Michael wrote: Hi Mike & all, > Did you do some 60M work maybe? Yes, I did. > Check your WSJT-X.ini file and look for Fmin. > > You probably have a Fmin=0 entry. > Change that to your desired offset. Yes, it was set to zero. Many thanks, Mike ! Best wishes, Cla

Re: [wsjt-devel] JT65+JT9 mode: blue delimiter reset to zero

2017-04-30 Thread Black Michael
Did you do some 60M work maybe? Check your WSJT-X.ini file and look for Fmin. You probably have a Fmin=0 entry.Change that to your desired offset. If you were doing 60M that may explain what happened and I can try and repeat the problem and fix it.  If you weren't doing 60M than it's hopefully a

[wsjt-devel] JT65+JT9 mode: blue delimiter reset to zero

2017-04-30 Thread Claude Frantz
Revision: 7660 Hello ! I have observed that this blue JT65 to JT9 delimiter is reset to zero and that its value is not saved. Best wishes, Claude -- Check out the vibrant tech community on one of the world's most engagi