Hi!
This has been discussed before few times.
I still can not understand why those buttons must follow the idea of rig
display and buttons "put RX vfo content to TX vfo".
There are also few other things that I can not understand. But as with
this, no response for those others too.
Operating
You are misinterpreting things. Those buttons do not refer to the waterfall
markers...they refer to the numeric offsets right next to the button.So Tx<--Rx
moves the receive offset to the transmit...when then causes the waterfall
marker for the transmit to move to the receive offset.
de Mike W9
Interesting. My top button (of the two) is Tx<--Rx and moves the Tx
(upper red marker) to the Rx (lower green marker) when I click it - vice
versa on the lower button Rx<--Tx.
Does this both on v1.9rc, the previous rc releases and v1.8. I do not
remember whether it was the same on earlier vers
Hi all,
Hearty thanks to everyone who participated in the Third Public Test of
FT8 DXpedition Mode!
A number participants and would-be participants reported that
propagation was spotty, at best. Nevertheless, at AA7A, G4WJS, K1JT,
and K9AN we copied 405 unique callsigns of stations acting a
What version are you running?
Behaves property here on 1.9.0-RC4
Click top button which copies Rx to Tx works as expected.
de Mike W9MDB
On Monday, May 7, 2018, 9:21:48 AM CDT, Al Pawlowski
wrote:
Be nice if the Rx<—Tx (now does Rx to Tx) and Tx<—Rx (now does Tx to Rx)
buttons
I do the same transmit filter on my ANAN 100 at 1450-2050.Don't see any reason
we couldn't do a split adjustment at offset-25 for FT8 and run a 100Hz filter.
That's the minimum filter size PowerSDR will take.So for a 1900 offset you
would get split at 1875m, your signal at 1900-1950, and the up
Thanks Bill, that was the problem. Using N Avg 3 restores the Band and Time
indications.
Bill, W4WNT
On Monday, May 7, 2018, 4:15:21 AM EDT, Bill Somerville
wrote:
On 07/05/2018 00:44, Bill Turner via wsjt-devel wrote:
Using rc4 r8642 and r8648, I am not seeing the Band
Be nice if the Rx<—Tx (now does Rx to Tx) and Tx<—Rx (now does Tx to Rx)
buttons were corrected to match their functions.
Al Pawlowski, K6AVP
Los Osos, CA USA
--
Check out the vibrant tech community on one of the worl
This was not obvious to me from reading the manual or noting that the dial
frequency was moved up or down. It is key that the audio frequency is also
moved opposite the dial frequency an equal amount and both should be mentioned
in the manual - for slow heads like me at least. Anyway, I get it n
I get the same no-time/band with N Avg 4. Looks like there's room for it.
de Mike W9MDB
On Monday, May 7, 2018, 3:15:19 AM CDT, Bill Somerville
wrote:
On 07/05/2018 00:44, Bill Turner via wsjt-devel wrote:
Using rc4 r8642 and r8648, I am not seeing the Band and Time
ind
On Mon, 7 May 2018 10:35:26 +0100
Bill Somerville wrote:
> announce. I do try and keep up to date with the latest "stable and
> long term" release of Linux for Intel/AMD on Ubuntu and Fedora and
> Raspbian on Raspberry Pi when making release kits but note that that
Tnx Bill
I meant just for in
On 07/05/2018 10:20, jarmo wrote:
wsjtx
wsjtx: error while loading shared libraries: libgfortran.so.4: cannot
open shared object file: No such file or directory
In F28 there is libgfortran.so.5
And when try compile in F28 I get:
/wsjtx_config.h:47:11: virhe: ”size_t” ei nimeä tyyppiä
typ
Hi Daniel,
if it were me making the decision, I would probably not accept such a
contribution. I say this because it is the thin end of the wedge and
even though it may be a simple concept it would surely lead to many
follow up requests about tracking the multitude of DX'ing goals that
occupy
Just testing wsjtx in new F28. Does not start..
wsjtx
wsjtx: error while loading shared libraries: libgfortran.so.4: cannot
open shared object file: No such file or directory
In F28 there is libgfortran.so.5
And when try compile in F28 I get:
/wsjtx_config.h:47:11: virhe: ”size_t” ei nimeä tyyp
If someone implements this, will it be accepted ?
This has been on my list of stuff to investigate for a long time and it
seems like a good simple feature. Not too easy to implement in code (last
time I checked) as the relevant information is not available at the
decision making point and need to b
On 07/05/2018 04:27, Charles Otnott via wsjt-devel wrote:
Sirs,
Please allow for an entity to be shown as
NEW DXCC on a per band basis.
My particulars apply:
Program Version: 1.9.0-rc4
Operating System: MS Windows 7
Problem: Program does not allow for an
entity to be shown as "NEW DXCC"
Hi Tim,
some comments in line below.
On 07/05/2018 04:00, Timothy Hickman wrote:
I made a QSO yesterday with W7/KH7 from FM19 during the DX testing
exercise. It took over an hour.
Thanks for joining the test, we could not simulate true pile ups without
the help of so many of you.
I was
On 07/05/2018 00:44, Bill Turner via wsjt-devel wrote:
Using rc4 r8642 and r8648, I am not seeing the Band and Time
indications on the Wide Graph using FT8. Windows 10, Dell D630 laptop,
Icom IC-7300 with USB connection.
The Band and Time appear on the Wide Graph using JT65.
Bill Turner, W4W
Hello Mike,
thanks for your advice!
Of course I can use split mode, I have often used it in CW pile ups.
In SAT mode two different VHF/UHF band must be chosen if you use an
FT-847...
gl de ha6nn
Andras
On Mon, May 7, 2018 at 3:52 AM, Black Michael via wsjt-devel <
wsjt-devel@lists.sourceforge.net>
19 matches
Mail list logo
