On 05/21/2018 07:46 AM, Saku wrote:
Hi Saku, Mike, Bill & All,
> I recommend: Do not upgrade to F28. At least not yet.
The need to upgrade the operating system is often guided by the
necessity to get updates of the components. Such an upgrade is a long
running process and there are addition post
On 05/21/2018 04:12 AM, Michael Pittaro wrote:
Hi Michael & All,
> Pulse remembers the setting for individual applications - the version
> change may have caused it to treat wsjt as a 'new' application, and
> forget all you're carefully tweaked settings.
In my understanding pulseaudio doesn't re
Hi MIke !
I recommend: Do not upgrade to F28. At least not yet.
F27 works as should. Even with 1.9.0-rc4.
According to my previous post I have now tested with that laptop's own
sound card and it results same as with external USB sound device.
Settings/Audio: "pulse" does not give TX audio, us
I'm not running this config, but I have Fedora 27 with 1.8. I recommend
poking around in the pule audio mixer (pavucontrol)
Pulse remembers the setting for individual applications - the version
change may have caused it to treat wsjt as a 'new' application, and forget
all you're carefully tweak
So this adds a new menu item which does erase on exit and is the default choice
now for first run. Turns on tooltips for this menu too to explain the items.
https://www.dropbox.com/s/o1qago0lcvdctj5/delwav2.patch?dl=1
de Mike W9MDB---
Mike, how are these patches applied?
Thanks,
Bobby/N4AU
From: Black Michael via wsjt-devel
Sent: Sunday, May 20, 2018 10:05 AM
To: WSJT Software Development
Cc: Black Michael
Subject: [wsjt-devel] Delete wav files patch
In many instances left over wav files can accumulate even if save "None"
On 05/20/2018 06:12 PM, Saku wrote:
Hi Saku & All,
> RX was ok, but no sound for TX. (I
> have similar interface in use with shack PC, F27. It works both TX & RX
> set as "pulse".
The same apply here.
> 2nd: was that every time program was closed it did not wipe lock file
> (and the wsjtx folde
HI Claude!
With Fedora 26 and 27 this works ok. Pulse is remembering setting for
wsjt-x.
How ever there I have done /etc/pulse/daemon.conf flat-volumes = no
With F28 I'm not sure yet. There is at least "no TX-audio" issue if
"pulse" is selected.
with "alsa-" selection TX seems to work and
Hi !
During weekend I tested latest rpm with laptop that I do not normally
use at ham shack (that has F27 and self compiled wsjtx).
F28 was upgraded during last week, so everything should be nearly then
last packages.
Wsjtx was: wsjtx-1.9.0-0.3.rc4.fc28 / jskarvad / 2018-05-02 10:02:01
from
On 20/05/2018 17:03, Claude Frantz wrote:
Hi All,
If running in an environment using pulseaudio, wsjtx creates streams
having a name containing the PID. Therefore the name of the stream is
different in every program run. pulseaudio is not able to save the
volume of such streams. If I use the ava
Hi All,
If running in an environment using pulseaudio, wsjtx creates streams
having a name containing the PID. Therefore the name of the stream is
different in every program run. pulseaudio is not able to save the
volume of such streams. If I use the available option named "pulse" in
the Audio Con
How about a separate menu entry "None at all" or "None+Erase"?
de Mike W9MDB
On Sunday, May 20, 2018, 10:54:24 AM CDT, Bill Somerville
wrote:
On 20/05/2018 16:05, Black Michael via wsjt-devel wrote:
In many instances left over wav files can accumulate even if save "None" is
On 20/05/2018 15:33, Black Michael via wsjt-devel wrote:
On non-FT8 modes (i.e. JT65) receiving a message with your callsign is
not being displayed on the Rx Frequency panel unless within 10Hz.
e.g. This will show up in Band Activity but not Rx Frequency window.
W9MDB W1ABC RRR
Here's a patc
On 20/05/2018 16:05, Black Michael via wsjt-devel wrote:
In many instances left over wav files can accumulate even if save
"None" is selected.
This patch will remove all wave files on program exit if "None" is
selected.
https://www.dropbox.com/s/fq8hb43toopy6mp/delwav.patch?dl=1
de Mike W9
In many instances left over wav files can accumulate even if save "None" is
selected.
This patch will remove all wave files on program exit if "None" is selected.
https://www.dropbox.com/s/fq8hb43toopy6mp/delwav.patch?dl=1
de Mike W9MDB
On non-FT8 modes (i.e. JT65) receiving a message with your callsign is not
being displayed on the Rx Frequency panel unless within 10Hz.
e.g. This will show up in Band Activity but not Rx Frequency window. W9MDB
W1ABC RRR
Here's a patch to fix it so that any msg directed at your callsign shows
The latest on-line manual is really good! It is extensive and covers just
about every aspect of the software system. I spent several hours going through
it and discovered many things now covered that I had to discover on my own or
were brought up in the user group. Kudos for a job well done.
17 matches
Mail list logo
