I was able to reproduce this multiple times even after a reboot so I went back
to 1.9.1 for the last couple days.
Then today I get the fast ring update for Windows 10 which hosed my VB Cable
setup (and all my USB devices which updates seems to like to do) -- so
reinstalled VB and now I can't r
I recently installed the new version. Everything is working fine from my
side. But not getting any reply form the other side.
Then I went back to V 1.91 the call sign I called in V 2.0.0 and did not
get a reply in 1.9.1 gave a reply instantly. what can be the reason ?
Regards
73s Unni
VU2TE
_
Thanks, I'll wait for the released version. I have the old version on
several other computers including a Raspberry Pi.
-Original Message-
From: Bill Somerville
Sent: Thursday, October 04, 2018 2:20 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] WSJT-X v2.0.0-rc2
*WSJT-X 2.0-rc *
*took a quick search of the archive and did not see this.*
On the current beta release, adjust the tx power slider during the tx
interval, the tones get interrupted.
This is on dual core p4 3.4 GHz with windows 7 and 16 GB ram.
___
wsj
Joe,
Thanks - another PICNIC issue "Problem In Chair Not In Computer"
John
On Thu, Oct 4, 2018 at 5:36 PM Joe Taylor wrote:
> John --
>
> On 10/4/2018 5:23 PM, John Kludt K4SQC wrote:
> > In to and checked NA VHF Contest - on main page TX
> > 2.0 NA VHF verbage appeared in Red Bar. Generate
Mike,
> On Oct 3, 2018, at 9:26 AM, Black Michael via wsjt-devel
> wrote:
>
> Having a problem with transmit signals behaving badly when 12dB down or more
> on RC2. The behavior I see is my output power gradually rises over about 3
> seconds and that's what started my investigation. If abov
Hi John,
> On Oct 4, 2018, at 4:23 PM, John Kludt wrote:
>
> Folks,
>
> In to and checked NA VHF Contest - on main page TX 2.0
> NA VHF verbage appeared in Red Bar. Generated messages as expected. TX1
> grayed out. Went back to checked ARRL FD and filled in exchange.
> Back on main pa
John --
On 10/4/2018 5:23 PM, John Kludt K4SQC wrote:
In to and checked NA VHF Contest - on main page TX
2.0 NA VHF verbage appeared in Red Bar. Generated messages as
expected. TX1 grayed out. Went back to checked ARRL FD and
filled in exchange. Back on main page Red Bar TX 2.0 now read
Folks,
In to and checked NA VHF Contest - on main page TX
2.0 NA VHF verbage appeared in Red Bar. Generated messages as expected.
TX1 grayed out. Went back to checked ARRL FD and filled in
exchange. Back on main page Red Bar TX 2.0 now reads ARRL FD. Generated
appropriate messages. TX 1 gr
On 04/10/2018 21:51, M Lewton wrote:
Thanks but I can't find where to disable the 77 bit options?
In the Settings, Advanced, nothing is checked in the FT8 Message types.
I know I am getting old at 82 but let me know where the disable is.
Hi Maurice,
it looks like replying to a compound call s
Thanks but I can't find where to disable the 77 bit options?
In the Settings, Advanced, nothing is checked in the FT8 Message types.
I know I am getting old at 82 but let me know where the disable is.
Other than a couple of gripes it seems to be working very well. No crashes,
no false decodes,
On 10/4/2018 12:34 PM, M Lewton wrote:
A change I would like when answering a CQ and after receiving RRR it jumps
to CQ. It would be better if it stayed on 73 as many times I have to repeat
73 for the contact.
RR73 would be OK to jump to CQ.
Maurice WA6PHR
I second this. Many times I have ha
On 04/10/2018 18:34, M Lewton wrote:
What causes this: attachment
When I try to answer a CQ I get my call less the Grid ?
Also the other end can't decode it the next items ?
Hi Maurice,
you are using WSJT-X v2.0.0-rc2 on the conventional FT8 sub-band. If you
are doing that you must disable t
Put WSJT-X slider at -12 and got no change moving between 17m and 20m. Rather
than adjusting my PA settings, bumped output tx to ~100W by increasing my
PowerSDR tx input gain - easier.
I have not seen any problems with VAC, but will try the VoiceBanana for
comparison.
Al Pawlowski, K6AVP
Los
Some additional info that may be useful to the issue of false decodes.
In my case, it never happens during active periods. By that I mean, when
I'm calling CQ, answering to a CQ or during a QSO. It always seems to
happen during idle periods, that is, if I go do something else for a few
minutes. Up
I thought it was just the 'price to pay' for AP and deep decoding. If this
is being treated as a bug, I'm also seeing it. Something like 2 to 3 times
an hour, just to frame it in a period of time.
There is another interesting situation happening, but only if you use
JTAlert to monitor and initiate
Second this suggestion and also would like to be able to filter B4 contacts
Thanks 73Morris WA4MIT
On Wednesday, October 3, 2018, 8:49:08 PM CDT, DXer
wrote:
A returnee from JTDX.
RC2 has been great, no problems so far. Decoding is very good.
One request. In addition to the CQ only b
17 matches
Mail list logo
