[wsjt-devel] Mac tool tip box too small

I noticed running 2.0 rc5 that the text box the tool tips are placed in is too small on Mac OS 10.14.1. One place this shows up is hovering over "Hold TX Freq". I have also noticed the same problem on earlier versions of wsjt-x and MacOS. The result is that to end of the tool tip isn't visible.

Re: [wsjt-devel] Potential bug in SAVE logic?

Check the Save Directory path in your TEST1 Settings/AudioI was unable to reproduce your problem so I suspect you have the same path in both instances de Mike W9MDB On Friday, November 30, 2018, 5:13:56 PM CST, David Bean (KC2WUF) via wsjt-devel wrote: I just started a new instance

[wsjt-devel] Feature request for Hound mode

I scored 4W for ATNO on 20M Fox/Hound today, pretty easily at that. Thanks to the JT/FT developers once again for helping my DXCC count! This bring up something I had been thinking about before. It would be nice for those of us who do not use CAT for whatever reason to have an option to limit

Re: [wsjt-devel] FT-8 "MOCK CONTEST"

Hi Edfel Thanks for the tip, I will be ready for next time. 73 Gavin ZL3GAV *Sent from my iPhone* > On 1/12/2018, at 17:14, Edfel Rivera wrote: > > Hi Gavin: > > Mke sure to fill exchange sent and operator name. Also grid if in blank. > Same happen here and gone once I completed those

Re: [wsjt-devel] "FT8 Roundup" mock contest

Serge, I have been watching here South of the Equator and I can echo your observations. From most of what I am observing off groups and spot databases most comms is intra-US. Almost all comments back here are from US stations. As for your second point – unification cannot happen when there is

Re: [wsjt-devel] FT-8 "MOCK CONTEST"

That should be Operator Callsign, same as in Settings > Reporting. 73 -Jim NU0C On Fri, 30 Nov 2018 23:14:32 -0500 Edfel Rivera wrote: > Mke sure to fill exchange sent and operator name. -- “There’s something out of place – let’s go and poke it with a stick.” – The Doctor, "Amy’s Choice"

[wsjt-devel] RU logging

Lots of fun tonight on 7.080. 20 contacts but it seemed like I had to work harder than previous tests. Copied K1JT at -24 for a few minutes, so the band definitely was not as good. I was paying attention to the logging more closely based on some previous comments and noted something that see

[wsjt-devel] Tonight's Practice Observations - it works!

First off, a huge thanks to the development team for all the hard work you put into WSJT-X. You guys did a fantastic job. The RTTY RU contest mode works great and I'm looking forward to the FT8 Roundup tomorrow. I think it's going to be fun. I only have one suggestion at this time for future relea

Re: [wsjt-devel] FT-8 "MOCK CONTEST"

Hi Gavin: Mke sure to fill exchange sent and operator name. Also grid if in blank. Same happen here and gone once I completed those fields. 73' Edfel KP4AJ On Fri, Nov 30, 2018 at 10:52 PM ZL3GAV wrote: > Hello > > > > Propagation is not great to ZL this afternoon, however I worked VK4CMV, >

Re: [wsjt-devel] "FT8 Roundup" mock contest

27.11.2018 0:55, Joe Taylor пишет: Another one-hour "practice contest" is scheduled for Saturday, December 1, 0200-0300 UTC Sir Joe and colleagues, my respect, I had enough for half an hour. It's boring. USA very weak signals (100W?), Few stations. WSJT-X is much better now, but I think ther

Re: [wsjt-devel] Fwd: "FT8 Roundup" mock contest

So far I have seen two on who missed this On Fri, 30 Nov 2018 17:41:41 -0500 Joe Taylor wrote: > Do not use a compound or nonstandard callsign > in this event. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourcef

[wsjt-devel] Potential bug in SAVE logic?

I just started a new instance of wsjt-x using --rig-name=TEST1 to use for the mock test tonight. The file folder it points to is ...\WSJT-X - TEST1 as I expected, but when I selected File -> Delete all *.wav & *.c2 files in SaveDir, it took a long time. Upon further examination, all my new save

Re: [wsjt-devel] Issue with 2.0 RC4 8and RC3 and 1.9) on MacOS 10.14.1

On 15/11/2018 21:49, Bruno Boucher via wsjt-devel wrote: Here is the dump log… Tried the Preference clean but did not help…+starting application that closes within 1/2 second, not even seeing the windows… Thank’s for any help. Best 73’s Bruno, DL2 KBC Hi Bruno, sorry for the delay, I have

Re: [wsjt-devel] v2.0.0-rc5 - JT65 has disappeared

Thanks Joe. Sadly, that is true. I will miss the dual mode. I try to make a JT contact or two when I see band activity to keep the flame alive. Maybe activity will pick up a little after the grid scrapers are done. 73 -Jim NUoC On Fri, 30 Nov 2018 17:34:33 -0500 Joe Taylor wrote: > If one

Re: [wsjt-devel] RC 5 issue entering Field Day info

Bill, I did not leave a space between the class and section. I went back and entered it with the space and it worked. Thanks for the heads up on the space.. Al AF4FA On Fri, Nov 30, 2018 at 3:09 PM Bill Somerville wrote: > On 30/11/2018 19:35, Al Flapan wrote: > > I went to settings and advanced

[wsjt-devel] Fwd: "FT8 Roundup" mock contest

Reminder: Another FT8 Roundup practice session starts about 3.4 hours from now. See below. The real FT8 Roundup starts in about 19.4 hours. See https://www.rttycontesting.com/ft8-roundup/ See you in one or both events! Be sure to use RC5 and to read the docs. -- 73, Joe, K1JT ---

Re: [wsjt-devel] v2.0.0-rc5 - JT65 has disappeared

On 11/30/2018 5:06 PM, Jim Shorney NU0C wrote: FWIW I have always used JT9+JT65 as opposed to plain JT65 mode. So did I. Emphasis on past tense. It was convenient and did a lot to encourage use of JT9 when it was a new mode. Why would one not? If one is involved in writing and maintaini

Re: [wsjt-devel] v2.0.0-rc5 - JT65 has disappeared

FWIW I have always used JT9+JT65 as opposed to plain JT65 mode. Why would one not? 73 -Jim NU0C On Fri, 30 Nov 2018 15:59:49 -0500 Joe Taylor wrote: > We will probably do away with JT9+JT65 mode, some time soon. It is no > longer useful, and it complicated the code in a number of ways.

Re: [wsjt-devel] Grid squares Rc5, Win 10, ft8

On 30/11/2018 21:54, OG55W wrote: OK Bill! Serial numbers are not allowed in those contests. Hi Keijo, I doubt anyone could complain if extra information is exchanged, also handy to see how others are doing. 73 Bill G4WJS. ___ wsjt-devel mailin

Re: [wsjt-devel] Grid squares Rc5, Win 10, ft8

OK Bill! Serial numbers are not allowed in those contests. So have to use free text to give six digits. Another idea is to use the central point of 4 digits square for calculation. Very few stations are using MSK. But with FT8 it is posiible to get more stations for Tuesday and Thursday evenings

Re: [wsjt-devel] Defect or Design? Contest Exchanges not logged.

If by "internal tests" you mean simulating logging a contact by clicking Log QSO and filling out fields in the popup dialog, your experience coincides with mine; the exchange fields in WSJT-X's .adi log, and in the UDP log packet, do not appear correctly. However, if I actually work a RU contact a

Re: [wsjt-devel] RC 5 issue entering Field Day info

Mike Are we not talking about Winter Field day here NOT the Roundup thing. Tom -- 73’s Tom GM8MJV (IO85) On 30 Nov 2018, at 20:08, Black Michael via wsjt-devel wrote: > That's not the format for the FT8 Roundup > It only takes the state in the exchange and a signal report. > > Check p

Re: [wsjt-devel] Grid squares Rc5, Win 10, ft8

On 30/11/2018 21:34, OG55W wrote: 2019 OH VHF contests (Tuesday and Thursday evenings) will accept FT8 mode but hope that everybody will give 6 digits. Bands are 28 Mhz, 50 MHz, and up..  (one band/evening) 73 Keijo OG55W Hi Keijo, EU VHF contest mode in WSJT-X v2.0.0 does use 6-digit grid e

Re: [wsjt-devel] Grid squares Rc5, Win 10, ft8

2019 OH VHF contests (Tuesday and Thursday evenings) will accept FT8 mode but hope that everybody will give 6 digits. Bands are 28 Mhz, 50 MHz, and up.. (one band/evening) 73 Keijo OG55W -Alkuperäinen viesti- From: Bill Somerville Sent: Friday, November 30, 2018 10:46 PM To: wsjt-dev

Re: [wsjt-devel] v2.0.0-rc5 - JT65 has disappeared

Hi Sandro, Thanks for reporting this defect. It has been fixed, and will be OK in the GA release. In the meantime, the workaround is essentially the same as I reported earlier: Switch to JT9+JT65 mode, toggle the button above "Hold Tx Freq" to show "Tx JT9 #", then return to JT9 mode. We

Re: [wsjt-devel] Grid squares Rc5, Win 10, ft8

On 30/11/2018 20:37, Jim Emerson wrote: I have set up FN13fd as my location grid square. I am only seeing 4 units ( FN13). When I send. Not seeing other 6 unit grid squares in the receive window. Am I doing something incorrect? Please advise. Thank you, ka2aic Hi Jim, 6-digit grids are used

[wsjt-devel] Grid squares Rc5, Win 10, ft8

I have set up FN13fd as my location grid square. I am only seeing 4 units ( FN13). When I send. Not seeing other 6 unit grid squares in the receive window. Am I doing something incorrect? Please advise. Thank you, ka2aic ___ wsjt-devel mailing list wsjt

Re: [wsjt-devel] v2.0.0-rc5 - JT65 has disappeared

Hi Joe, I have similar problem switching from FT8 to JT9 - frequency 14.078 (registered in frequency table) - switch from FT8 to JT9 - VHF/UHF functions are disabled - standard message is "CQ IW3RAB JN65" RX seem to be JT9, TX is fixed to FT8 Thank in advance exceptional work I hope the tran

Re: [wsjt-devel] RC 5 issue entering Field Day info

That's not the format for the FT8 RoundupIt only takes the state in the exchange and a signal report. Check paragraph 4 here. https://www.rttycontesting.com/ft8-roundup/rules/ de Mike W9MDB On Friday, November 30, 2018, 1:39:38 PM CST, Al Flapan wrote: I went to settings and advanced

Re: [wsjt-devel] RC 5 issue entering Field Day info

On 30/11/2018 19:35, Al Flapan wrote: I went to settings and advanced to enter the info for the exchange and was only able to enter the class !E and it would not let me enter the rest which is the section info of SFL. I takes the info for the rtty exchange with no problem. Al AF4FA Hi Al,

[wsjt-devel] RC 5 issue entering Field Day info

I went to settings and advanced to enter the info for the exchange and was only able to enter the class !E and it would not let me enter the rest which is the section info of SFL. I takes the info for the rtty exchange with no problem. Al AF4FA __

Re: [wsjt-devel] FT8 Support for Winter Field Day

There is a simple way to accomodate FT8. Have WFD adopt the class letters H (Home), I (Inside), and F (Field). It is Winter Field Day after all. This would fit into the current WSJT-X programming. Bill Turner, W4WNT On Thursday, November 29, 2018, 11:43:18 PM EST, Tim Goeppinger via wsjt-d

Re: [wsjt-devel] WSJT-X: Apple Mac Users - Please read

Well Apple dropped support for it in 2016 I believe so it’s a reasonable decision if you do decide to do the same. 73 Keith. > On 30 Nov 2018, at 18:31, Bill Somerville wrote: > > On 30/11/2018 18:26, Keith Maton via wsjt-devel wrote: >> Hi Bill, >> >> I’m not but I think I’ve still got a c

Re: [wsjt-devel] WSJT-X: Apple Mac Users - Please read

On 30/11/2018 18:26, Keith Maton via wsjt-devel wrote: Hi Bill, I’m not but I think I’ve still got a copy of the installer stashed away somewhere.  If I can get it installed into a VM, will that help you? 73 Keith G6NHU http://qso365.co.uk Hi Keith, thanks for the offer but it's not needed

Re: [wsjt-devel] WSJT-X: Apple Mac Users - Please read

Hi Bill, I’m not but I think I’ve still got a copy of the installer stashed away somewhere. If I can get it installed into a VM, will that help you? 73 Keith G6NHU http://qso365.co.uk > On 30 Nov 2018, at 17:24, Bill Somerville wrote: > > Hi All, > > I need to determ

[wsjt-devel] WSJT-X: Apple Mac Users - Please read

Hi All, I need to determine if any WSJT-X users are still using OS/X 10.9 Mavericks. Please reply if you are? I am asking because we are suffering a Qt defect in the v5.8 QtNetwork libraries. It is causing a crash with users who have a proxy server between them and the Internet. Qt v5.9 whic

Re: [wsjt-devel] Defect or Design? Contest Exchanges not logged.

Comments from the dev team on this? Tom OH6VDA > 29. nov. 2018 kl. 23:17 skrev Laurie, VK3AMA <_vk3a...@vkdxer.net>: > > Running some simple internal tests today (RTTY RU) and note that Contest > exchanges are not being recorded in the wsjtx_log.adi file. > > Similarly, contest exchanges are n

Re: [wsjt-devel] Which FREQS for 1-2 Dec Roundup?

Thanks a lot! Oh yes, miscellaneous doesn't mean useles. 73! Damijan V V pet., 30. nov. 2018 ob 16:54 je oseba Joe Taylor napisala: > On 11/30/2018 10:49 AM, DAMIJAN ŠKVARČ S58G wrote: > > Sorry, maybe I have overlooked in the rules: Which exact frequencies > > will be used in 1-2 December Roun

[wsjt-devel] Keyboard shortcuts on Mac version

Hi WSJT-X software developers. I’ve just grabbed rc5 which seems to be working well for me, thank you. I didn’t even realise there was a window with the keyboard shortcuts before (f3) so that’s really handy to know. The only thing is that the keys are different on the Mac version. Is it poss

Re: [wsjt-devel] Which FREQS for 1-2 Dec Roundup?

7. In the Frequency (MHz) box, manually type in the frequency you want to add in MHz., such as 3.590, 7.090, 14.130, 21.130 or 28.078. When finished, click OK. To add more frequencies, repeat the procedure shown in *Step 5* . L

[wsjt-devel] Keyboard shortcuts window on Mac version

Hi WSJT-X software developers. I’ve just grabbed rc5 which seems to be working well for me, thank you. I didn’t even realise there was a window with the keyboard shortcuts before (f3) so that’s really handy to know. The only thing is that the keys are different on the Mac version. Is it poss

Re: [wsjt-devel] Which FREQS for 1-2 Dec Roundup?

On 11/30/2018 10:49 AM, DAMIJAN ŠKVARČ S58G wrote: Sorry, maybe I have overlooked in the rules: Which exact frequencies will be used in 1-2 December Roundup? J. Taylor wrote for mock test: <<>> But what about for 80, 15 and 10 M please? Go here for FT8 Roundup Rules and related advice: http

[wsjt-devel] Which FREQS for 1-2 Dec Roundup?

Hi everybody, Sorry, maybe I have overlooked in the rules: Which exact frequencies will be used in 1-2 December Roundup? J. Taylor wrote for mock test: <<>> But what about for 80, 15 and 10 M please? Regards! Damijan, S58G ___ wsjt-devel mailing list

Re: [wsjt-devel] WSJT-X rc5 error reports

Allen, you can change the LoTW text color by right-click on the color selection. However, if you change it to black, all indications will be black. This item should be left unchecked as the vast majority of FT8 users are LoTW users. The better option was in RC3 which had that to show - check for

Re: [wsjt-devel] wsjt rc5

My liver is never going to survive this. On 11/30/2018 11:27, w...@frontier.com wrote: wsjt 2.0.0.5c5  install rc5 and I can not get anything in the band activity water fall is ok rc4 and rc5 is the same . I run rc3 and it work great but rc 4 rc5 can not work any one I can not see. I run wi

Re: [wsjt-devel] wsjt rc5

Take a peek at the quick start guide as well as the large splash screen that comes up when you open RC5… (you’ll find there that RC4 and RC5 are not backwards compatible with the older versions). Jim S. N2ADV From: w...@frontier.com [mailto:w...@frontier.com] Sent: Friday, Novemb

[wsjt-devel] wsjt rc5

wsjt 2.0.0.5c5  install rc5 and I can not get anything in the band activity water fall is ok rc4 and rc5 is the same . I run rc3 and it work great but rc 4 rc5 can not work any one I can not see. I run win 7 pro. can I get some help.    I am not the only one there is 4 of us when I install rc4