I've noticed that in F/H mode after I call 5 times Enable Tx will turn off,
similar to what happens in non F/H mode when the Tx watchdog expires.
However, unlike in that case, there's no red indicator in the lower left
corner, it just stops sending. I've confirmed that my watchdog timer is set
Hi Rich,
On 10/7/2019 1:28 PM, Rich Zwirko - K1HTV wrote:
This morning it took three attempts to finally work ZK3A on 80M FT8 in
the F/H mode. In the first two attempts, after ZK3A answered me, my tone
frequency was moved to their TX tone frequency as was expected. Then for
two transmissions,
This morning it took three attempts to finally work ZK3A on 80M FT8 in the
F/H mode. In the first two attempts, after ZK3A answered me, my tone
frequency was moved to their TX tone frequency as was expected. Then for
two transmissions, they sent calls and reports but did not copy the Rogers
and
Hi Stephen:
I have, in my dubious spare time, been working on a WSJT-X FAQ sanctioned by
Bill, G4WJS, and Joe, K1JT. Once it's up, it should reduce the repetition, and
the need for extra releases.
Now that Im letting the cat out of the bag, if anyone has a candidate FAQ
(hopefully with an
Hi Bill,
The "Decode" button stays permanently cyan colored on some of the instances,
and does not blink at all. As for the DT values, I have no evidence, and am
currently trying to reproduce the problem.
I will let you know as soon as the problem re-appears.
73's and have a nice day.
Erik
ON4PB
Hmmm I am looking at quite a number of messages here and a lot of "related
postings" seem to be coming up.
Is it perhaps time for another release of the work in progress to perhaps clear
some of the repetition?
___
wsjt-devel mailing list