-a468f0de-20220603.tar.gz
Black Michael via wsjt-devel kirjoitti 3.6.2022 klo 16.39:
In that case please use this DLL and send me the debug log as described
below.
https://www.dropbox.com/s/7aejdv74nfjxr0q/libhamlib-4.dll?dl=0
Please place this file as described below
https
No can do... :-D
Fedora 35, no Windozes in this house.
Last tested version was: hamlib-4.5~git-a468f0de-20220603.tar.gz
Black Michael via wsjt-devel kirjoitti 3.6.2022 klo 16.39:
In that case please use this DLL and send me the debug log as
described below.
https://www.dropbox.com/s
In that case please use this DLL and send me the debug log as described below.
https://www.dropbox.com/s/7aejdv74nfjxr0q/libhamlib-4.dll?dl=0
Please place this file as described
belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X The
Sorry but it does not work. It is even worse.
Interesting side effect was that after installing new Hamlib ic7300 lost
output power when rigctld was started from scirpt before wsjtx.
Even rebooting pc did not restore power.
When killed rigctld from script and set wsjtx to use icom7300 serial
I think this has been fixed in the latest
Hamlib.http://n0nb.users.sourceforge.net/
Mike W9MDB
On Friday, June 3, 2022, 03:06:21 AM CDT, Saku via wsjt-devel
wrote:
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "Allow TX frequency changes while
It has been fixed.
http://n0nb.users.sourceforge.net/
Mike W9MDB
On Friday, June 3, 2022, 05:03:29 AM CDT, Kari Sillanmäki via wsjt-devel
wrote:
Hi Saku, Michael, Mike et al
I can duplicate this behaviour reported by Saku on my 7300.
I'm using the rigctld-wsjtx bundled
Hi Saku, Michael, Mike et al
I can duplicate this behaviour reported by Saku on my 7300.
I'm using the rigctld-wsjtx bundled with WSJT-X 2.5.4 source tarball on
Ubuntu 18.04.6 LTS.
This seems to be a defect in hamlib; RX-frequency should always stay put.
73's de Kari, oh2gqc
On 3.6.2022
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "Allow TX frequency changes while
transmitting" in settings/general tab
Set your TX around 300Hz by shift+left click on waterfall. Start TX
period and while your TX is on move your TX around 2800Hz by
