On 22/02/2023 6:52 pm, Saku via wsjt-devel wrote:
What is set in stone, stands there.
I do highly prefer backward compatibility, but but fixing this does
not break anything.
While a change would not break anything, it will introduce a change
that will require users to change their operatin
Understood Joe. I understand that it should have been set at “none” as it is
not a wide doppler shift. I was only commenting on how the program action
changed – w/o any changes made to the program/setup, with the default setting
(“own echo”)…
but we’re good – I have it (properly) set to “none
Gary --
I'll repeat what I said before. I believe if you configure WSJT-X as
described in the User Guide and the referenced paper, its behavior will
be as it should be.
You have not said if you are using CAT control. If YES, and you choose
"Own Echo", you'll see your dial frequency change
Lance, Thanks – but the issue is that the operation and displayed results –
changed! It first was showing, on the Echo graph centered (0). And at the same
time it showed on the wide graph as the echo was where it should be – i.e.
1596Hz for a 96Hz echo doppler shift. And it decoded a signal with
Hi Gary,
I have not followed the ECHO mode documentation, but it may be that on the Wide
Graph, you see the trace coming back as doppler shifed, but (at least in previous
versions) the ECHO mode moves the frequency around, along with its receiver, and just
displays the sum total of the average
Thank you sir. Will do.
Gary
K9RX
Sent from Mail for Windows
From: Joe Taylor
Sent: Wednesday, February 22, 2023 11:18 AM
To: WSJT software development
Cc: K9RX
Subject: Re: [wsjt-devel] Possible issue with ECHO mode - 2.6.0
Hi Gary,
On 2/22/2023 10:28 AM, K9RX via wsjt-devel wrote:
> I lik
Hi Gary,
On 2/22/2023 10:28 AM, K9RX via wsjt-devel wrote:
I like to use ECHO to test the station on 6M EME.
But the latest version has changed enough I was wondering if there was a
short help file for it?
Better than a short help file: there's a full paper about Echo mode.
See item #34 her
Thank you – I’ll look this over to see if it addresses the echo appearing
differently in both the wide and echo graph.
Gary
Sent from Mail for Windows
From: Charles Suckling via wsjt-devel
Sent: Wednesday, February 22, 2023 10:53 AM
To: WSJT software development
Cc: Charles Suckling
Subject:
Hi Gary
Have a look at these, which will hopefully help.
https://wsjt.sourceforge.io/Echo_Mode_in_WSJT-X_2.6.0.pdf
http://www.bobatkins.com/radio/EME_WSJTX_echo_mode_basic_guide.html
73
Charlie DL3WDG
On Wed, 22 Feb 2023 at 16:37, K9RX via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
I like to use ECHO to test the station on 6M EME.
But the latest version has changed enough I was wondering if there was a short
help file for it?
Also: The Echo graph will at times show the echo centered – and other times
show it offset. I have a jpg showing a recent echo run where the echo
10 matches
Mail list logo
