Usually on click ok, the Config pane pops up on radio tab so you can
reconfigure , so you don't see that then, ok ?
It would be interesting to confirm a program interface like FLrig,
Commander or HRD works,
or rigctld/Hamlib interface , rather than actual radio choice.
73
vk4tux
On 21/3/2
The Rig Control Error window is never displayed.
But to answer your question... going into the settings and doing a 'Test
CAT' does not restore the connection.
-Scott AA5AM
On Wed, Mar 20, 2024 at 7:11 PM Adrian wrote:
> Re below ; If you click 'ok', and then are shown the wsjtx radio settings
Re below ; If you click 'ok', and then are shown the wsjtx radio
settings tab, does 'Test CAT' restore the cat connection ?
73
vk4tux
On 21/3/24 09:52, Scott Armstrong via wsjt-devel wrote:
The Rig Control Error pop-up message is not raised.
image.png
When CAT is restored by turning on th
Hi All,
I have encountered a problem running 2.7.0-rc4 with Hamlib version
[image: image.png]
This impacts an Icom IC-756ProII and IC-746. The issue is not observed when
running a IC-9700
The problem is also observed running 2.7.0-rc3 with the new Hamlib version
The workaround is to roll back to
Russ,
I worked 62 DXCC (no EME) on 2m but stopped when we got 6m in SM. Since then I
have worked 254 DXCC on 6m and I can tell you that 2m propagation and 6m
propagation differ a lot. My main concern is 6m today. On 6m quite often
several propagation modes interact (and you don’t always know
John,
Nope, I mean 6m. I have been workings om SW too and that reporting system would
work better on 6m during contests.
73
Bo
Från: John Kludt via wsjt-devel
Skickat: den 11 mars 2024 20:00
Till: WSJT software development
Kopia: John Kludt
Ämne: Re: [wsjt-devel] MSK144 & FT8
