worked when I did so from
Settings>Apps and Features
Maybe something like that is all that's necessary to clear this one up -
the installer to suggest a different default folder for each version?
Alan G0TLK
On 31/12/2022 13:46, Alan Groups via wsjt-devel wrote:
Following a system c
Following a system clean-up I've looked a bit further into the weird
menu and other entries I found on my system and found the same effects
arising on version upgrade, so it's a repeatable issue:
*The Uninstaller*
* Following a system clean of WSJT-X, installation of v 2.5.4 and
after a re
stem
(not sure why it's doing that, further investigation to follow!)
Deleted all the entries in ProgramData and rebooted
Installed v 2.5.4, now all seems to be OK with just the single entry for
2.5.4 everywhere.
Alan G0TLK
On 28/12/2022 17:29, Alan Groups via wsjt-devel wrote:
Hi, in d
Hi, in doing some end of year computer housekeeping, under W10 (latest
update), I noticed that in Programs and Features I have WSJT-X versions
2.5.2, 2.5.3 and 2.5.4 showing. I haven't had time to look at the
current RC's so they aren't installed.
If I try to uninstall 2.5.2 and 2.5.3 it asks
Hi, I left WSJT-X running on Rx while I had to do something else, which
unexpectedly took longer than I anticipated and the PC entered sleep mode.
On awakening it I completed a QSO and on auto-log WSJT-X crashed,
status.txt file error, path not found (it's in temp folder).
Clicked OK to the e
Maybe use a completely different app on the same system and then see if
the distortion is still there?
Alan G0TLK
On 17/02/2021 13:02, Black Michael via wsjt-devel wrote:
Since I've also verified this on an IC-7300 with it's own USB sound
card seems it's a Windows bug. I think this is a recen
e changed WSJT-X for the next release to override the Hamlib
behaviour and enable PTT sharing for all users, that will mean that if
the original problem is real then unsuspecting users will have
problems even if they have no use or knowledge of PTT sharing between
Hamlib clients. Let's see how th
And if I may chip in most importantly please make sure *all* changes are
listed in release notes, with a link to release notes for libraries that
are used - so users can see them intuitively.
Leaving users to find out about changes unexpectedly in what is becoming
a large and complex app leads
Haven't tested this version yet but something else that might be good in
my view is to have a CAT command to vary maximum power output available
from the rig, for those rigs that support it?
Alan G0TLK
On 15/02/2021 14:35, Rich - K1HTV wrote:
I noticed that while running WSJT-X v2.4.0-rc1, the
Hi, use the colour highlighting settings? There are options in there for
grids not already in the log, and also grids not in the log by band.
Alan G0TLK
On 14/02/2021 16:48, jeff millar wrote:
Hello all,
Sometimes I need to search the Band Activity list for a specific
station who is known to
Keeping thermal stress on the system - rig and PSU - by turning power
down at least a bit from full output makes sense to me with these modes,
whether or not rig ratings demand it, particularly as any reduction in
received signal strength will be minor.
More heat = more risk of failure regardl
Hi, this adjustment is part of W10 (assuming you have latest version) -
Settings>System>Sound>Advanced sound options>App volume device preferences
Hope that assists.
Alan G0TLK
On 01/02/2021 09:10, Maurizio Brameri wrote:
Hi everyone,
is there a way to set automatically at launch the gain of
I changed the text message in Tx6 by adding a call prefix so it became
"CQ JA..."
Worked OK until I tried to change it back to just "CQ" - then the change
wouldn't stick. It kept reverting to "CQ JA" several times, but
eventually it did hold.
Not sure what happened, but I may have been a b
A prime concern with all software is development time, but in my
experience that's dwarfed by maintenance time requirements as that
usually grows at a faster rate than the development time as an app gets
bigger.
For example something changes in the core application, the plugin
enabling code (
It occurs to me that this may also need to be checked the EU General
Data Protection Regulation (GDPR)? It's very wide in effect!
Alan G0TLK
On 03/12/2020 16:32, Bill Frantz wrote:
Given the number of cultural differences in naming, it is a difficult
question which name is the given name and
Got on with something else, and on another try RC02 is now decoding again.
Alan G0TLK
On 29/11/2020 17:24, Alan Groups wrote:
And now RC2 won't decode anything, 2.2.2 is fine!
Alan G0TLK
On 29/11/2020 17:21, Alan Groups wrote:
Hi, running 2.3.0 RC2, Kenwood TS590S:
* Double cl
And now RC2 won't decode anything, 2.2.2 is fine!
Alan G0TLK
On 29/11/2020 17:21, Alan Groups wrote:
Hi, running 2.3.0 RC2, Kenwood TS590S:
* Double click a station to call it
* Rig goes into Tx
* Click halt TX
* RC2 brings up a rig control error asking me if I wish to reconf
Hi, running 2.3.0 RC2, Kenwood TS590S:
* Double click a station to call it
* Rig goes into Tx
* Click halt TX
* RC2 brings up a rig control error asking me if I wish to reconfigure
* If I click no then RC2 quits
2.2.2 doesn't do this, same rig, computer etc (I have the RC in a
separate fol
This article also gives a full explanation - updated in 2019.
https://techcommunity.microsoft.com/t5/ask-the-performance-team/the-basics-of-page-faults/ba-p/373120
Alan G0TLK
On 20/10/2020 15:23, Black Michael via wsjt-devel wrote:
Hmmm...not what this says...they claim a hard fault is asking f
Hi, just tested 2.3.0 RC1 for this:
* Running Meinberg NTP, time.is reporting exact (+/- 0.01s)
* Looking at 7MHz FT8 Rx - by eye most DT numbers seem to be in the
0.3 to 0.4 range with quite a few outliers at even greater offsets
including +1's
* On 14MHz FT4 (no FT4 signals on 7MHz!) m
Hi, testing this by adding a new configuration for a Funcube SDR as my
main rig doesn't cover these low bands.
On changing between configurations once the new one was set WSJT-X
restarted but when it did the main screen went top left of my monitor,
with most of the title block off screen, and
For what it's worth until this afternoon I didn't know what they are!
Alan G0TLK
On 28/07/2020 17:18, Andy Durbin wrote:
Hi Joe,
Thanks for your reply.
"Would there be huge howls of protest if Tab 2 were permanently removed? If so,
should we pay attention to them?"
Perhaps the first questio
25018 AMSAT-UK FUNcube Dongle Pro+ 20200112.0
Beta RIG_MODEL_FUNCUBEDONGLEPLUS
WSJT-X 2.2.2 works fine in FT8 mode, including changing bands, but with
some notes:
* I altered the main settings rather than create a new configuration,
by selecting the Funcube in t
Omitted to add that with my tests below, no I don't have that box set
either.
Alan G0TLK
On 09/06/2020 09:36, Alan Groups wrote:
Hi, I've just checked my Kenwood:
* Turned the rig on and changed the frequency from that last used
with WSJT-X 2.2.1
* Turned rig off at
Hi, I've just checked my Kenwood:
* Turned the rig on and changed the frequency from that last used with
WSJT-X 2.2.1
* Turned rig off at it's power button but leaving PSU on
* Started WSJT-X 2.2.1
* Rig turned on and WSJT-X changed to the new frequency, rig beeped
* Closed WSJT-X, rig st
Well there's one other user here who may find that very useful when
controlling the station from somewhere else other than my shack/study
having been stuck in there in front of a PC screen for days on end while
remote paid working!
I tend to agree it's not something for the mainstream though,
Hi, thanks for all the work.
Just noticed a bit of messy clutter in the status bar on start-up,
cropped screenshot attached. Lasts a second or two then OK - I had to
be quick with alt-prtscreen!
Alan G0TLK
___
wsjt-devel mailing list
wsjt-devel@l
, Alan Groups wrote:
I've been playing with RC01 to 03 on FT8 at HF - plenty of decodes,
certainly many more than 2.1.2, but I haven't worked that many CQ's -
they didn't respond.
My impression is that using 2.1.2 I was able to get more completed
contacts in the same testin
I've been playing with RC01 to 03 on FT8 at HF - plenty of decodes,
certainly many more than 2.1.2, but I haven't worked that many CQ's -
they didn't respond.
My impression is that using 2.1.2 I was able to get more completed
contacts in the same testing sessions.
Timing is Meinberg controll
Could there be a Windows Event that could be picked up using Task
Scheduler and a warning run?
Alan G0TLK
On 27/05/2020 21:26, Bill Somerville wrote:
On 27/05/2020 21:16, runninge...@gmail.com wrote:
Dear developers,
Looking at some of the recent “audio in problem“ posts, would it make
sen
Is it related to USB Selective Suspend - see
https://helpdesk.flexradio.com/hc/en-us/articles/204290929-How-to-Disable-Power-Management-for-USB-connected-Devices
for example?
My printer has recently started misbehaving similarly - USB lead
sometimes has to be unplugged and plugged back in to g
Hi, thanks - interesting and useful, but could I suggest putting those
words in the User Guide, together with an brief explanation of the
various decoder modes? (Sorry if already there but on a quick look I
haven't been able to find them)
The list of AP information types is a bit long to remem
disconnected albeit with a ground return from the 55m coax feeder
available via the rig power leads there were a few decodes and visible
QSO's on 40m - impressive given that pickup must have been purely
capacitive from the coax!
Alan G0TLK
On 25/05/2020 11:19, Alan Groups wrote:
Hi, in my
Hi, in my view goalposts are fine with the white line beneath the RX one
and the waterfall background no longer quite black.
Window resize issue on turning menus off has gone.
Nothing else checked yet.
Alan G0TLK
___
wsjt-devel mailing list
wsjt-
:
Hi Alan,
thanks for your considered comments and observations. Some comments in
line below from me.
On 23/05/2020 16:50, Alan Groups wrote:
Hi, I'm concentrating on the UI rather than program function,
hopefully not too pernickety! Some of these may not be specific to
RC1 but are j
prised that it picked up all my 2.1.2 settings?
Hopefully the above is of some use, keep up the good work!
Alan G0TLK
On 22/05/2020 18:05, Alan Groups wrote:
Hi, just tried this out on some 10m Es using FT8:
I find the two stage display of decodes a little disconcerting; the
double flash of
Hi, just tried this out on some 10m Es using FT8:
I find the two stage display of decodes a little disconcerting; the
double flash of the decode button doesn't help - adds more visual
clutter? Could the user maybe have a choice to temporarily cache the
early decodes and then show them all at
I wonder if some additional information could be added, within one of
the existing automated fields?
This would not only give more personalisation of QSO's but would be
valuable for propagation and station comparisons etc.
I have in mind a simple short 2 digit number 0 to 9 each digit, for ex
38 matches
Mail list logo
