the SDR Console and MAP65 is
misbehaving (stuttering, signal amplitude overflow ?).
Thanks for looking into this,
73's Erik
ON4PB
-Original Message-
From: Joe Taylor
Sent: Tuesday, 17 October 2023 20:32
To: WSJT software development
Cc: Erik Icket
Subject: Re: [wsjt-devel] Fortr
of wsjt-devel digest..."
Today's Topics:
1. Fortran runtime error in MAP65 3.0.1 (Erik Icket)
2. Re: Fortran runtime error in MAP65 3.0.1 (Black Michael)
--
Message: 1
Date: Tue, 17 Oct 2023 13:17:31 +0200
From: &qu
Dear developers,
The following Fortran runtime error occurred a number of times in MAP65.exe
:
Running: C:\WSJT\wsjtx\bin\m65 -s
At line 13 of file C:\JTSDK64-Tools\WSJTX\BBdevelop\lib\pctile.f90
Fortran runtime error: Index '-240641' of dimension 1 of array 'tmp' below
lower bound of 1
Error te
Dear developers,
When switching to a predefined configuration, an information dialog pops up
with the message 'Unable to create shared memory segment mem-qmap',
followed by another modal message a few secs later 'Optimizing FFTs for your
CPU. Please be patient ...'
After that, the program does n
Dear developers,
Would it be of interest to implement the IQ data repeater between QMAP and
the SDR console ?
The IQ Data Repeater has a well-documented interface specification
(https://www.sdr-radio.com/data-repeater) and streams IQ data in either
16-bit or 32-bit to a UDP port.
Looking at qmap\
+0100
From: 5p1kzx Michael <5p1...@gmail.com>
To: Erik Icket via wsjt-devel
Subject: Re: [wsjt-devel] 3Y0J F/H operation - was my "R+rpt" report
received ?
Message-ID:
Content-Type: text/plain; charset=UTF-8; format=flowed
Hi Erik
?Can't see what software and ver
Hi dear developers,
I believe the 3Y0J expedition learned us a lot about correct F/H practices
and at the same time, pushed the protocol to its limits.
There is however one situation which occurred in the early hours of the
expedition where unsolvable confusion reigned : "Was the expedition using
Hi dear developers,
Below is a ** correct ** sequence of fox/hound messages which are taken from
my ALL.TXT file, but which did not make if to a full QSO in the expedition
log (snif, snif, ..) :
230211_17014518.107 Tx FT8 0 0.0 1857 3Y0J ON4PB JO20
230211_17013018.107 Rx FT8-17
I observed that confusion as well last weekend when F/H was used on the
regular FT8 frequencies.
What about adding an additional "Decode highlighting" for FOX messages (type
0.1 in the payload) in the Color tab ?
73's Erik
ON4PB
Message: 1
Date: Tue, 8 Nov 2022 01:19:15 +
From: Tsutsumi Take
Hi,
I am operating a solar power enabled WSPR beacon (Raspberry Pi with a uBitX)
for which the battery is running low during winter months.
Would it make sense to add an "Enable TX at startup" checkbox (for WSPR
only) so that my beacon picks up when my setup powers up ?
73's
Erik
ON4PB
Hi,
I have received a number of RRR messages at the end of a QSO in this
weekends RU.
I believe this is caused by users operating with tab 2 (iso tab 1) and
initiating the QSO.
If there is no reason for a RRR in ARRL RU contest mode , maybe disabling
tab 2 and 3 ?
Best regards and enj
Hi,
My participation in the "2230-2300 UTC, Friday, 5 January - FT8 focus"
session went very very smoothly and I was able to complete 10 QSO in little
above 30 mins on 40 m.
Some observations (all positive) :
* received one popup dialog with an "Invalid Rcvd Exch" for a station
re
Hi,
I came across a straight program exit after double clicking on a prefixed
callsign in the band activity window.
The message was CQ PJ4/PA3BWK FK52 and I was using the 75 bit FT8 mode on
V2.0.0-rc1
The saved audio file can be found at
https://1drv.ms/u/s!AtBGol2-BnqRgtYHuw7GHWphzRBWtg
and th
Hi,
I found that messages with CQ are not always green colored if the last 7
criteria are put to the white color.
This happens with V2.0.0-rc1, and a color scheme as follows :
CQ in message -> green
My call in message -> red
Transmitted message -> yellow
New DXCC -> Cyan
All other c
Hi,
What about this suggestion so that FT8 and FT8 Dxpedition do not step on
each other's frequencies and modes are not mixed up in the allocated
segments ?
* Introduce a new "Mode" in the menu "FT8 DXexp"
* By default (after a software installation or frequency reset) the
"FT8
Hi,
Would it make sense to implement a feature so that CQ messages do not start
transmitting in the middle of an interval ?
Today, if one wants to launch a CQ message at the next interval, one has to
(1) observe the time, (2) select the appropriate Tx even/1st and (3) Enable
TX
Could th
Hi,
I believe a minor issue occurred when 2 stations replied simultanously to my
CQ message.
The scenario is the following :
My CQ ON4PB was sent at 1236 Hz
SA2KNG replied on my calling freq 1236Hz
AB1HL replied simultanously on 1178 Hz.
With "Auto Seq" and "Call 1st" enabled, my "S
Hi,
When performing the Frequency Calibration using the 3 combined RWM
frequencies (4.996 , 9.996 and 14.996 MHz), I have observed very consistent
results with the DF typically floating less than 0.2 Hz.
RWM transmit an unmodulated carrier between 0 and 8 minutes past the hour
(as well as 30 mi
Hi Tamas,
I decoded the same 6 decodes as Steve with build 7774 on Windows.
Hope this helps,
ON4PB,
Erik.
--
Message: 3
Date: Sun, 02 Jul 2017 13:37:21 +
From: Steven Franke
To: Joe Taylor
Subject: Re: [wsjt-devel] r7775 FT8 decoding
Message-ID:
Content-Typ
Hi,
Can I make a few very ** minor ** GUI suggestions ?
1. Shouldn't we rename the TX even/1st label in JT8 mode to something
that explicitly refers to the quarter/kwadrant inside the minute into which
we will transmit ?
Something like "Start at 0 or 30 secs" ?
2. In the main
I successfully operate latest build 7752, and in the last 12 hours, I was
able to copy on 14079 the following stations :
OE1MWW, F1ABL, CT1FBK, I3VJW, KB3MOW, AK1P, VA3VF, K9AN, K4DET, WB4KDI
There is however one anomaly with my rig control (ICOM 7100 in SPLIT mode) :
When I PTT with
21 matches
Mail list logo
