I use Flex radios...
For some time now, each time I install a new version of WSJT-x ( 2.7.0
RC's or 2..7.1 improved ), by installing over an existing version, the
RIG selection is reset to ADT-200A when Flex-radio 6xxx should have been
retained.
Its a minor issue since it only occurs when a
You will find them by going to the dial frequency.. They'll be in
the pass band to decode if they're strong enough. If you put your dial
on their tx frequency, you'll never decode them. They'll be below your
rx passband.
AL, K0VM
On 7/30/2024 3:44 PM, Gary McDuffie via wsjt-devel wrote:
s DLL
https://www.dropbox.com/scl/fi/q0s2ykjhaz19j7sv84rf6/libhamlib-4.dll?rlkey=m02sjo5hqyfqgquhasdpptals&dl=1
Mike W9MDB
On Thursday, July 11, 2024 at 11:19:02 AM CDT, k0vm via wsjt-devel
wrote:
( Wsjt_improved_AL 240712 )
It appears to me that 240712 included a hamlib (2024-07
( Wsjt_improved_AL 240712 )
It appears to me that 240712 included a hamlib (2024-07-10) that
dropped or busted the recently included Flex cat function bypassing SSDR
CAT and providing by slice rigs.
Replacing hamlib with 2024-06-30 restored the function.
AL, K0VM
This is using the Flex API to communicate directly to the radio with out
the need to use SSDR CAT.
( SSDR CAT provides translation from CAT commands to Flex API. ) Each
hamlib 'Slice X' has a different API commands that are slice specific.
And they all ( indeed all api's ) go through the radio
M Black Michael via wsjt-devel
wrote:
What software are you using for the Flex?
This was made for the current version of SmartSDR.
Mike W9MDB
On Tuesday, July 2, 2024 at 09:08:44 AM CDT, k0vm via
wsjt-devel wrote:
Mike,
selecting the Slice A option.
Went back to Flex XXX
Hope this helps.
Bill W2PKY
On Mon, Jul 1, 2024 at 5:20 PM k0vm via wsjt-devel
wrote:
( wsjt-x-rc5/Hamlib 2024-06-30-T21:25Z, Flex 6600, SSDR 3.7.4)
1) When upgrading from RC4 ( which was running Flex 6xxx hamlib),
rig select
