On 09/05/2017 15:32, Bill Somerville wrote:
> The last two fields on an MSK144 decode line are the the number of bit
> errors corrected using the message FEC and the "eyopening". The latter
> is a measure of signal quality, its maximum value is 2.0 and less than
> that represents a reduced signal q
On 01/05/2017 08:19, Claude Frantz wrote:
> The first few fields at the beginning of the lines are clear to me
> because they are nearly the same as in modes like JT65. But I cannot
> decode the fields at the end of the lines.
Hi Claude,
sorry for the delay providing this information.
The last t
On 04/30/2017 08:32 PM, Rich Griffiths wrote:
Hi Rich & all,
> I hope someone has already answered you directly - I haven't seen an
> answer posted to the list server. In any case, here's what I know of
> the messages.
Your answer is the first one I have got. Thanks !
> 4 12 - I forget the e
I hope someone has already answered you directly - I haven't seen an
answer posted to the list server. In any case, here's what I know of
the messages.
094745 - the start time for the current MSK144 decoding sequence
-4 - the signal to noise ratio in dB
0.7 - the time in seconds since the sta
Hello all !
Please explain me all the fields in such messages found in ALL.TXT,
while in MSK144 mode:
094745 -4 0.7 1543 & S51AT EI7BMB R+00 4 12 -1.1
094745 -2 1.6 1543 & S51AT EI7BMB R+00 3 12 -1.2
094745 -1 2.3 1542 & S51AT EI7BMB R+00 3 4 -0.5
094745 0 2.8 1543 & S51A
