The K3 can apparently be quite slow when switching bands and such.
I recently saw a 3.5 second timeout was not long enough.
So bump up your timeout value to 5000 and see if the problems disappear.
de Mike W9MDB
On Friday, May 11, 2018, 9:26:12 AM CDT, Claude Frantz
wrote:
On 05/10/20
On 05/10/2018 10:21 PM, Sherman Banks wrote:
Hi Sherman & All,
> Trying to control a K3. The most common error is
> Hamlib error: Protocol error while opening connection to rig
> But I have seen one related to the VFO but that doesn’t happen as often.
> I have the Timeout at 3000 and polling at
ith WSJT-X.
From: Bill Somerville [mailto:g4...@classdesign.com]
Sent: Monday, April 30, 2018 6:17 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] Communication Error
On 30/04/2018 20:50, Sherman Banks wrote:
Trying to run N1MM and WSJT-X at the same time through microHAM
On 30/04/2018 20:50, Sherman Banks wrote:
Trying to run N1MM and WSJT-X at the same time through microHAM USB
Device Router which allows two CAT programs to talk to one radio. WSJT
will occasionally give a Rig Control error which I have been able to
reduce the occurrence by having the program
You can adjust the timeout value...see this reference...seem like this
information should be the user guide but it isn't.
https://sourceforge.net/p/wsjt/mailman/message/35618089/
de Mike W9MDB
On Monday, April 30, 2018, 3:11:16 PM CDT, Sherman Banks
wrote:
V1.9.0-rc4
Windows 10
V1.9.0-rc4
Windows 10
Trying to run N1MM and WSJT-X at the same time through microHAM USB Device
Router which allows two CAT programs to talk to one radio. WSJT will
occasionally give a Rig Control error which I have been able to reduce the
occurrence by having the programs poll slower. It app
