Richard,
Have you downloaded and installed the correct CODEX for your Icon? Look for
the Silicon Labs CODEX on the Icom site.
Good luck.
Danny AH6FX/W4 - Virginia
On Friday, July 26, 2024 at 10:19:56 PM EDT, Peter Sumner via wsjt-devel
wrote:
Hello Dick, Do not select
Hello Dick,
Do not select a com port for ptt, please set that option to be "CAT" for tx
and then should be all okay. Use the test CAT and then test PTT buttons to
the green results.
Peter, vk5pj
On Sat, Jul 27, 2024, 09:04 Richard L Kohlhaas via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrot
Richard,
You have tried the other COM ports? While I run a linux system here, I have a
rig and computer that the port assignment changes from time to time. Also,
check again the baud rate in wsjtx, be sure it is correct for the rig being
used. This would be in Settings, in the FILE section o
I am just now trying to start using WSJT. I can receive OK, but not
transmit--PTT doesn't work. When I open the program I frequently get get a Rig
Control Error, with
invitation to reconfigure the radio. There is nothing to adjust there,
except Test Transmit, and then I get Rig Failure.
At Mi
