FWIW ... Tx5 is not cleared just in case you have to resend an RR73 if
your QSO partnet did not receive it.
Neil, KN3ILZ
On 5/26/2020 6:28 AM, Alan Groups wrote:
Redundant QSO left over from previous session - using ESC key cleared
all fields except TX5. This cleared itself on a program resta
Redundant QSO left over from previous session - using ESC key cleared
all fields except TX5. This cleared itself on a program restart.
False decodes - rig left running for an hour or so with no antenna -
nothing seen.
With just a bit of coax to a switched dummy load and the antenna
disconne
Hi Georg,
as you say "Preferences" I assume you are using macOS. What o/s version
are you using please?
73
Bill
G4WJS.
On 25/05/2020 17:38, Georg Isenbürger wrote:
Joe et al,
while using „Configurations“ I was not able to get back into „Preferences“
anymore. Showed a menue similar to „Conf
Joe et al,
while using „Configurations“ I was not able to get back into „Preferences“
anymore. Showed a menue similar to „Configurations“.
73’s Georg
> Am 25.05.2020 um 18:17 schrieb Joe Taylor :
>
> Hi Jim,
>
> On 5/25/2020 3:04 AM, Jim Brown K9YC wrote:
>> Thanks VERY much for this one:
>>
Hi Jim,
On 5/25/2020 3:04 AM, Jim Brown K9YC wrote:
Thanks VERY much for this one:
"Hold Tx frequency no longer cleared when switching between modes."
We're halfway there -- TX frequency defaults to 1500 Hz when I've
returned from MSK144 to FT8. Is it possible to remember prior setting of
TX
Hi, in my view goalposts are fine with the white line beneath the RX one
and the waterfall background no longer quite black.
Window resize issue on turning menus off has gone.
Nothing else checked yet.
Alan G0TLK
___
wsjt-devel mailing list
wsjt-
Thanks VERY much for this one:
"Hold Tx frequency no longer cleared when switching between modes."
We're halfway there -- TX frequency defaults to 1500 Hz when I've
returned from MSK144 to FT8. Is it possible to remember prior setting of
TX frequency?
I think the goalpost markers are improved
