Is there an example of configuring a dual stack network using confignetwork?
Google finds an example for confignics:
https://sourceforge.net/p/xcat/wiki/Configuring_IPv6_in_xCAT_Cluster/#configure-ipv6-addresses-and-gateway-on-the-compute-nodes-for-ethernet-adapters
But it doesn't seem to work f
I've written a patch to confignetwork allowing it to delete network cards that
are not configured.
This fixes https://github.com/xcat2/xcat-core/issues/6142
I think it could do with some testing by others before it becomes a pull
request. Anyway, here it is:
https://github.com/ChristopherWalke
mation from the ipmi call.
What is the manufacturer and model of your new x86 node ?
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide detail
2 DPS-1100AB-19 A : 4.51
After installing confluent, xCAT’s makeconfluentcfg can be used to set up the
confluent nodes to work.
From: Christopher Walker
Sent: Monday, December 6, 2021 8:27 AM
To: xCAT-user
Subject: [External] [xcat-user] rinv firmware
rinv firmware
currently only re
rk Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide details for "Christopher Walker" ---12/07/2021 05:31:17 AM---Hi
Mark,
e Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide details for "Christopher Walker" ---12/06/2021 11:02:04
AM---rinv firmware currently only reports the]&quo
rinv firmware
currently only reports the BMC firmware.
It used to report IMM version.
Is it possible to get it to report the XCC version, and indeed other firmware
like the network card?
Chris
___
xCAT-user mailing list
xCAT-user@lists.sourceforge
Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research, would
it?"
--Albert Einstein
[Inactive hide details for "Christopher Walker" ---11/25/2021 10:26:26 AM---We
regularly run a script that calls rvitals ]"
We regularly run a script that calls
rvitals leds
to detect hardware issues.
Even with the latest greatest xCAT release (2.16.3) this doesn't seem to work
on our power9 nodes:
[root@xcat1 ~]# rvitals $power9node leds
BADCODE: [xcat1]: Error: SDR reservation unsupported.
Should it?
Chris
___
https://xcat-docs.readthedocs.io/en/stable/guides/install-guides/zypper/verify_xcat.html
says:
service xcatd stop
[systemd] systemctl stop xcatd.service
Should we be using:
systemctl stop xcatd
these days?
Chris
___
xCAT-user mailing list
xCAT-us
https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/references/man1/pasu.1.html?highlight=pasu
says:
"Before running pasu, you must install the ASU RPM from IBM. You can download
it from the IBM Fix Central site. ".
The latest version I've found is from 2014/06/20
clust_14a_ibm_utl_
Currently we use "confignics -s -r" to configure the install NIC and remove the
config files for the other nics that exist, but are not configured.
Moving to a new xCAT version and confignetwork, I'd like to replicate that
behaviour (namely removing config files for other nics).
I can't find in
We'd like to automate the process of adding a node back to Spectrum scale after
a reinstall.
In a node definition we use three things:
prescripts-begin # runs on management node
postscripts # Runs on node after install (but before boot)
postbootscripts # Runs on node after install (but before bo
remoteshell doesn't currently support ed25519 keys.
It looks a relatively simple change to remoteshell to add it (and I think I'll
need to add it to credentials.pm too.
Before I write a patch, has anyone done this already.
It looks like Jarod's secureshell would be a better solution, but we ar
GuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
> Beijing P.R.China 100193
>
> IBM环宇大厦
> 北京市海淀区东北旺西路8号，中关村软件园28号楼
> 邮编:100193
>
> - Original message -
> From: Christopher Walker
> To: "xcat-user@lists.sourceforge.net&qu
us. Ring Building 28,
> ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
> Beijing P.R.China 100193
>
> IBM环宇大厦
> 北京市海淀区东北旺西路8号，中关村软件园28号楼
> 邮编:100193
>
> - Original message -
> From: Christopher Walker
> To: "xcat-user@lists.source
We have a problem with "configics -s -r" not running reliably in a
postscript.
While we have some infiniband nodes, the majority use only one network
for install and as the single network for the nodes.
On node install, we wish to assign a static IP address on the install
nic, and deconfigure
Is there a Vagrant model of an xCAT cluster?
If there were, it should be possible to build a test case for:
https://github.com/xcat2/xcat-core/issues/2633
While clearly it doesn't model the hardware, it would allow some sort of
testing of changes.
Chris
--
Dr Christopher J. Walker
ITS Research
18 matches
Mail list logo
