Hi,
Thanks for the support. I think I solved the problem partially.
@Andrii
> So I guess you see the abort on access to a peripheral missing on r8a7796
> but described in a device tree for r8a7795.
>
You were right. I commented out &sata and &rcarsound nodes from the device
tree created for xen a
Hi,
PFA the DTS I use for M3ULCB board
On 02/27/2017 12:48 PM, Oleksandr Tyshchenko wrote:
Hi.
On Mon, Feb 27, 2017 at 12:29 PM, George John wrote:
Hi,
Thanks for the reply,
I am using Linux version 4.6.
The memory nodes were already squashed. When I have used a different version
of Xen, it
Dear George,
Actually r8a7796 and r8a7795 are different chips with different
peripherals, so you should adjust your r8a7796-xxx.dtb.
I'm not really sure what the problem is with XEN 4.6, but the crash
point you are stepped in with 4.8 is commented as following
/*
* Currently, to e
Hi.
On Mon, Feb 27, 2017 at 12:29 PM, George John wrote:
> Hi,
> Thanks for the reply,
> I am using Linux version 4.6.
> The memory nodes were already squashed. When I have used a different version
> of Xen, it booted to dom0. but still the crash occurs as shown in the log
> below.
>
> I have als
Hi,
Thanks for the reply,
I am using Linux version 4.6.
The memory nodes were already squashed. When I have used a different
version of Xen, it booted to dom0. but still the crash occurs as shown in
the log below.
I have also noticed that for salvator x M3 board(r8a7796) the dtb file used
was r8a7
Hi,
Not 100% sure, but anyway...
Can you recheck after squashing all memory nodes to a single one.
---
I guess, you have following in your device tree:
memory@4800 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x4800 0x0 0x3800>;
};
memory@5000
On 21/02/17 12:03, George John wrote:
Hi,
Hello,
I was trying out xen in salvator-X(M3 Board as described
in
https://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extensions/Salvator-X
I ran in to following error:
U-Boot 2015.04 (Feb 21 2017 - 14:24:48)
CPU: Renesas Electronics
Hi,
I was trying out xen in salvator-X(M3 Board as described in
https://wiki.xenproject.org/wiki/Xen_ARM_with_Virtualization_Extensions/Salvator-X
I ran in to following error:
U-Boot 2015.04 (Feb 21 2017 - 14:24:48)
CPU: Renesas Electronics R8A7796 rev 1.0
Board: Salvator-X
I2C: ready
DRAM: