The patch series introduces the following things:
1. Functionality to build the page tables for Xen that map
link-time to physical-time location.
2. Check that Xen is less then page size.
3. Check that load addresses don't overlap with linker addresses.
4. Prepare things for proper switch to virtual memory world.
5. Load the built page table into the SATP
6. Enable MMU.
---
Changes in V5:
* rebase the patch series on top of current staging
* Update cover letter: it was removed the info about the patches on which
MMU patch series is based as they were merged to staging
* add new patch with description of VM layout for RISC-V2
* Indent fields of pte_t struct
* Rename addr_to_pte() and ppn_to_paddr() to match their content
---
Changes in V4:
* use GB() macros instead of defining SZ_1G
* hardcode XEN_VIRT_START and add comment (ADDRESS_SPACE_END + 1 - GB(1))
* remove unnecessary 'asm' word at the end of #error
* encapsulate pte_t definition in a struct
* rename addr_to_ppn() to ppn_to_paddr().
* change type of paddr argument from const unsigned long to paddr_t
* pte_to_paddr() update prototype.
* calculate size of Xen binary based on an amount of page tables
* use unsgined int instead of 'uint32_t' instead of uint32_t as
their use isn't warranted.
* remove extern of bss_{start,end} as they aren't used in mm.c anymore
* fix code style
* add argument for HANDLE_PGTBL macros instead of curr_lvl_num variable
* make enable_mmu() as noinline to prevent under link-time optimization
because of the nature of enable_mmu()
* add function to check that SATP_MODE is supported.
* update the commit message
* update setup_initial_pagetables to set correct PTE flags in one pass
instead of calling setup_pte_permissions after setup_initial_pagetables()
as setup_initial_pagetables() isn't used to change permission flags.
---
Changes in V3:
* Update the cover letter message: the patch series isn't depend on
[ RISC-V basic exception handling implementation ] as it was decied
to enable MMU before implementation of exception handling. Also MMU
patch series is based on two other patches which weren't merged [1]
and [2]
- Update the commit message for [ [PATCH v3 1/3]
xen/riscv: introduce setup_initial_pages ].
- update definition of pte_t structure to have a proper size of pte_t in case
of RV32.
- update asm/mm.h with new functions and remove unnecessary 'extern'.
- remove LEVEL_* macros as only XEN_PT_LEVEL_* are enough.
- update paddr_to_pte() to receive permissions as an argument.
- add check that map_start & pa_start is properly aligned.
- move defines PAGETABLE_ORDER, PAGETABLE_ENTRIES, PTE_PPN_SHIFT to
<asm/page-bits.h>
- Rename PTE_SHIFT to PTE_PPN_SHIFT
- refactor setup_initial_pagetables: map all LINK addresses to LOAD addresses
and after
setup PTEs permission for sections; update check that linker and load
addresses don't
overlap.
- refactor setup_initial_mapping: allocate pagetable 'dynamically' if it is
necessary.
- rewrite enable_mmu in C; add the check that map_start and pa_start are
aligned on 4k
boundary.
- update the comment for setup_initial_pagetable funcion
- Add RV_STAGE1_MODE to support different MMU modes.
- update the commit message that MMU is also enabled here
- set XEN_VIRT_START very high to not overlap with load address range
- align bss section
---
Changes in V2:
* Remove {ZEROETH,FIRST,...}_{SHIFT,MASK, SIZE,...} and
introduce instead of them XEN_PT_LEVEL_*() and LEVEL_*
* Rework pt_linear_offset() and pt_index based on XEN_PT_LEVEL_*()
* Remove clear_pagetables() functions as pagetables were zeroed during
.bss initialization
* Rename _setup_initial_pagetables() to setup_initial_mapping()
* Make PTE_DEFAULT equal to RX.
* Update prototype of setup_initial_mapping(..., bool writable) ->
setup_initial_mapping(..., UL flags)
* Update calls of setup_initial_mapping according to new prototype
* Remove unnecessary call of:
_setup_initial_pagetables(..., load_addr_start, load_addr_end,
load_addr_start, ...)
* Define index* in the loop of setup_initial_mapping
* Remove attribute "__attribute__((section(".entry")))" for
setup_initial_pagetables()
as we don't have such section
* make arguments of paddr_to_pte() and pte_is_valid() as const.
* use <xen/kernel.h> instead of declaring extern unsigned long _stext,
0etext, _srodata, _erodata
* update 'extern unsigned long __init_begin' to 'extern unsigned long
__init_begin[]'
* use aligned() instead of "__attribute__((__aligned__(PAGE_SIZE)))"
* set __section(".bss.page_aligned") for page tables arrays
* fix identatations
* Change '__attribute__((section(".entry")))' to '__init'
* Remove alignment of {map, pa}_start &= XEN_PT_LEVEL_MAP_MASK(0); in
setup_inital_mapping() as they should be already aligned.
* Remove clear_pagetables() as initial pagetables will be
zeroed during bss initialization
* Remove __attribute__((section(".entry")) for setup_initial_pagetables()
as there is no such section in xen.lds.S
* Update the argument of pte_is_valid() to "const pte_t *p"
* Remove patch "[PATCH v1 3/3] automation: update RISC-V smoke test" from the
patch series
as it was introduced simplified approach for RISC-V smoke test by Andrew
Cooper
* Add patch [[xen/riscv: remove dummy_bss variable] as there is no any sense
in
dummy_bss variable after introduction of inittial page tables.
---
Oleksii Kurochko (4):
xen/riscv: add VM space layout
xen/riscv: introduce setup_initial_pages
xen/riscv: setup initial pagetables
xen/riscv: remove dummy_bss variable
xen/arch/riscv/Makefile | 1 +
xen/arch/riscv/include/asm/config.h | 43 +++-
xen/arch/riscv/include/asm/mm.h | 9 +
xen/arch/riscv/include/asm/page-bits.h | 10 +
xen/arch/riscv/include/asm/page.h | 63 +++++
xen/arch/riscv/mm.c | 319 +++++++++++++++++++++++++
xen/arch/riscv/riscv64/head.S | 2 +
xen/arch/riscv/setup.c | 22 +-
xen/arch/riscv/xen.lds.S | 4 +
9 files changed, 464 insertions(+), 9 deletions(-)
create mode 100644 xen/arch/riscv/include/asm/mm.h
create mode 100644 xen/arch/riscv/include/asm/page.h
create mode 100644 xen/arch/riscv/mm.c
--
2.39.2
