To follow up on this, I configured the parallel port for standard mode and the
xeno_can_peak_dng driver works without error so the problem has to do with the
EPP/ECP mode. I would like to use EPP or ECP for performance. And as
indicated below, the xeno_can_peak_dng driver only recognizes the s
Hi John,
Charlton, John wrote:
> To follow up on this, I configured the parallel port for standard mode and
> the xeno_can_peak_dng driver works without error so the problem has to do
> with the EPP/ECP mode. I would like to use EPP or ECP for performance. And
> as indicated below, the xeno_c
...@grandegger.com]
Sent: Thursday, August 13, 2009 8:14 AM
To: Charlton, John
Cc: xenomai-help@gna.org
Subject: Re: [Xenomai-help] FW: Peak parallel port dongle rtcan driver
Hi John,
Charlton, John wrote:
> To follow up on this, I configured the parallel port for standard mode and
&g
Charlton, John wrote:
> Wolfgang,
>
> Thank you for the information and advice. We are currently considering this
> interface in a custom embedded controller design but based on your
> recommendations we probably need to reassess that decision. We were intending
> to use the parallel port thro
t seems to be out.
--
John
-Original Message-
From: Wolfgang Grandegger [mailto:w...@grandegger.com]
Sent: Friday, August 14, 2009 3:58 AM
To: Charlton, John
Cc: xenomai-help@gna.org
Subject: Re: [Xenomai-help] FW: Peak parallel port dongle rtcan driver
Charlton, John wrote:
> Wolfgan
