>
> post the output of
>
> lspci -v
And while you're at it, please also show the results of
cat /proc/interrupts
cat /proc/xenomai/irq
both just before loading the driver and right after the 'Disabling IRQ.'
message.
Jeroen.
> Roland
>
> Dennis Nguyen wrote:
> > Most of the times the RT
post the output of
lspci -v
Roland
Dennis Nguyen wrote:
> Most of the times the RTnet/Xenomai disabled the IRQ right away. few
> time it ran for a while.
> It doesn't matter the system has single or 2 cards, it still have
> conflict IRQ. I tried to change the slot but it did not help.
> Thank
Most of the times the RTnet/Xenomai disabled the IRQ right away. few
time it ran for a while.
It doesn't matter the system has single or 2 cards, it still have
conflict IRQ. I tried to change the slot but it did not help.
Thanks,
Dennis
Jeroen Van den Keybus wrote:
>
> The Xenomai disabled
>
> The Xenomai disabled the interrupt when it saw the sharing.
I may have mislooked, but doesn't xnintr_shirq_handler only disable the line
after XNINTR_MAX_UNHANDLED problematic IRQs (which is by default set to
1000) ? If you get the error immediately after loading the driver, it looks
like eit
Hi Jeroen,
Thanks for the information.
The Xenomai disabled the interrupt when it saw the sharing. The message
log from dmesg was:
xenomai: xnintr_shirq_handler: IRQ11 not handled. Disabling IRQ line.
The NICs worked normally with 8139too.ko and 8139cp.ko drivers.
I have three difference types
>
> Yes, I have problem with sharing the IRQ 11.
> my questions are:
> How can I set the rteth0 to a known not sharing IRQ in the system?
- You already said you don't have BIOS options.
- If you have multiple PCI slots, try swapping the cards. Usually, adjacent
slots have different interrupt line
Hello Gilles,
Thanks for the advice.
Yes, I have problem with sharing the IRQ 11.
my questions are:
How can I set the rteth0 to a known not sharing IRQ in the system?
How can I pass a known IRQ from RTnet to the Xenomai xnintr_shirq_handler?
I tried to fix the IRQ from "network configuration" but
On Nov 20, 2007 11:42 PM, Dennis Nguyen <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I'm using linux kernel 2.6.22.12, xenomai 2.4-rc6, and rtnet trunk 1140
> date 11/15/2007. There are 2 8139 RealTek nics in the system
>
> I got the disable IRQ messages when loading RTnet modules:
> Xenomai: xnintr_shi
Hello,
I'm using linux kernel 2.6.22.12, xenomai 2.4-rc6, and rtnet trunk 1140
date 11/15/2007. There are 2 8139 RealTek nics in the system
I got the disable IRQ messages when loading RTnet modules:
Xenomai: xnintr_shirq_handler: IRQ11 not handled. Disable IRQ line.
Xenomai: xnintr_shirq_handler
