Adresa cu care postati nu este inscrisa pe aceasta lista de email.
Detalii despre listele noastre de mail gasiti la
http://www.lug.ro/
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hi,
I'd like to be able to plug in my external USB-mouse and use it without
restarting X. Is this possible?
I have a Labtop with a PS2-Touchpad (Synaptics) running Linux 2.6.0
(selfcompiled) on a Debian unstable (XFree86 4.2).
Here is the mouse section of my XF86Config-4 :
Section "InputDevi
Hi,
I want to configure the horizontal synchro width to 1 line of screen.
How can I do that?
Is it a XFree86 configuration option (don't find any clue in XFree86 &
XFree86config man, and else where)?
Is it a driver option (normaly yes, I use the Nvidia 1.0-5328 driver
under XFree86 V4.3.0, but
Hello,
After configuring my XFree86 4.1.0.1, i keep on getting a 1920 by 1440 screen.
I have tried to correct this by entering the modes lines to my XF86Config.
However, i still get 1920x1440.
"
SubSection "Display"
Depth 15
EndSubSection
SubSection
Hi
I'm not clear.
From: Ian Romanick
When the card has to draw less pixels, a **larger** percentage of the time is spent sending commands from the CPU to the card.
When the window is tiny, the card is drawing fewer pixels, but the CPU has to send the
**same** number of commands per
frame.
So are
Andreas van Leeuwen Flamino wrote:
Hello,
After configuring my XFree86 4.1.0.1, i keep on getting a 1920 by 1440 screen.
I have tried to correct this by entering the modes lines to my XF86Config.
However, i still get 1920x1440.
"
SubSection "Display"
Depth 15
On Wed, Feb 11, 2004 at 12:38:18PM +0100, Thomas Winischhofer wrote the following
(indented);
>
> Edit /etc/X11/XF86Config-4, not /etc/X11/XF86Config.
>
Sorry, that was an error, i did edit /etc/X11/XF86Config-4.
What occured to me though, was that xf86cfg wants to write the file to
/usr/X11R
>>> Hi,
I'm running FreeBSD
>>> 5.2-Release and XFree86 Upon running startx I get the following
>>> error:
>>> execve failed for /usr/X11R6/bin/X (errno 2)
>>> _X11TransSocketUNIXConnect: Can't connect: errno = 2
>>> (last line repeated 5 times..
>>> giving up.
>>> xinit: No such file or directory
>>> Hi,
I'm running FreeBSD
>>> 5.2-Release and XFree86 Upon running startx I get the following
>>> error:
>>> execve failed for /usr/X11R6/bin/X (errno 2)
>>> _X11TransSocketUNIXConnect: Can't connect: errno = 2
>>> (last line repeated 5 times..
>>> giving up.
>>> xinit: No such file or directory
murad ali wrote:
> Respected Sir
> I M Murad Ali. I want to develope LFS system. But during BLFS , when I
> get Installed XFree86.
> With "startx" i get error messages. attached .
>Modes"1280*1024" "1024*768"
A copy of XFree86.0.log would be useful to see your errors, but I
On Wednesday 11 February 2004 04:35 am, NUKE THEM wrote:
> I'd like to be able to plug in my external USB-mouse and use it without
> restarting X. Is this possible?
Yes, I have it working on my system. Besides the two InputDevice sections you
posted, you may need to change your ServerLayout sect
Zhang HongWei wrote:
> XFree86 Version 4.0.3 / X Window System
> Release Date: 16 March 2001
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems. (See http://www.XFree86.Org/FAQ)
Strongly consider upgr
Hi,
I have a USB Mac keyboard, with a USB mouse that connects to the MAC
keyboard HUB. Right, has anyone got this configuration working? If so
and input on which kernel options to include and or xconfig options
would be uber helpful :)
Thanks in advance,
-Pete
___
Does anyone have the SGI 1600SW flatpanel working with an Oxygen
VX1 card under linux? I have made the 1600SW work with a Number
Nine Revolution IV but I can't make it work with the Oxygen VX1.
I am using XFree86 4.3. If anyone has made this work, could you
please send me a copy of your XF86C
Rahul Sawarkar wrote:
Hi
I'm not clear.
From: Ian Romanick
When the card has to draw less pixels, a **larger** percentage of the
time is spent sending commands from the CPU to the card.
When the window is tiny, the card is drawing fewer pixels, but the CPU
has to send the **same** number of com
We need to see the /var/log/XFree86.0.log file.
Mark.
On Wed, 11 Feb 2004, Andreas van Leeuwen Flamino wrote:
> Hello,
>
> After configuring my XFree86 4.1.0.1, i keep on getting a 1920 by 1440 screen.
> I have tried to correct this by entering the modes lines to m
On Wed, 11 Feb 2004, Patrice Martin wrote:
> Hi,
>
> I want to configure the horizontal synchro width to 1 line of screen.
> How can I do that?
If I understand the question, that is not possible. All
horizontal timings are in "characters", that is, they are multiples
of 8. That is a standar
On Wed, 11 Feb 2004, murad ali wrote:
> Respected Sir
> I M Murad Ali. I want to develope LFS system. But during BLFS , when I get
> Installed XFree86.
> With "startx" i get error messages. attached .
> Kindly help me as soon as possible.
> Wish u best of Luck
>
You did
On Wed, Feb 11, 2004 at 01:59:54PM -0500, Bill Campbell wrote:
> Does anyone have the SGI 1600SW flatpanel working with an Oxygen
> VX1 card under linux? I have made the 1600SW work with a Number
> Nine Revolution IV but I can't make it work with the Oxygen VX1.
> I am using XFree86 4.3. If an
Rahul Sawarkar wrote:
When the card has to draw less pixels, a **larger** percentage of the
time is spent sending commands from the CPU to the card.
When the window is tiny, the card is drawing fewer pixels, but the CPU
has to send the **same** number of commands per
frame.
So are you saying
S
Hi
When running X -configure, it suggested that I forward the enclosed file to you so you
can improve the coverage of xf84PciInfo.h
Best of Luck,
Dave Green
pci bus 0x0 cardnum 0x00 function 0x: vendor 0x1039 device 0x0650
SiS Device unknown
CardVendor 0x1558 card 0x0400 (Card unknown
I was making things far more complicated than they needed to be.
Your solution worked beautifully!
Alan Hourihane wrote:
On Wed, Feb 11, 2004 at 01:59:54PM -0500, Bill Campbell wrote:
Does anyone have the SGI 1600SW flatpanel working with an Oxygen
VX1 card under linux? I have made the 1600SW
Hi, these are the log file and the result of
"scanpci -v".
The server cannot Identify my screen, please
help.
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting
Hi,
Here are the log file and the result of "scanpci
-v".
The Screen is not found, the PC is a Toshiba
Satellite 1900-101.
I need some hints.thanks a lot.
Regards
pci bus 0x0 cardnum 0x00 function 0x: vendor 0x8086 device 0x1a30
Intel Device unknown
CardVendor 0x1179 card 0xff00 (Tos
Hello! Does anyone know if ATI All-In-Wonder 128Mb 9600 supported by
XFree86? If so, is the driver needed to utilize the dual head aspects of
the card?
Below is my 'XF86Config', maybe I made a mistake there. :)
Section "ServerLayout"
Identifier "Simple Layout"
InputDevice
On Fri, 6 Feb 2004, Ad-ware-scam wrote:
> We apologize for contacting you at this time during the day, but we need
> to make sure that you received our previous email back in December.
> We have checks from $25 - $150 ready to send you for offering us your
<*snip*>
> To not receive future email
On Fri, 6 Feb 2004, Jorge Huerga wrote:
> I dont know if that is a real bug or if i mistaked something, but when
> I try to startx it returns me something about send a mail to this
> direction for bugs.
>
> System is a PII at 233MHz, 4GB Hz, Debian woody 3 and Intel motherboard,
> with a 3D labs
On Wed, Feb 11, 2004 at 11:22:30AM -0800, Mark Vojkovich wrote the following
(indented);
>We need to see the /var/log/XFree86.0.log file.
>
>
> Mark.
>
I have attached it to this message.
Regards,
Andreas.
This is a pre-release version of XFree86, and is not supp
Dear [EMAIL PROTECTED]:
Your recent message to the OECL-L list has been
rejected for the following reason:
Only list subscribers may send messages to this list.
If you need assistance, please contact the list owner at
[EMAIL PROTECTED]
The text of your message follows:
Hi!
I'm trying to run ut2003 under linux with an nvidia driver, but
everytime I start the game it switches to 800x600 @ 56 Hz, altough my
monitor does support 1024x768 @ 85 Hz, and 800x600 @ 100 Hz (which I
can not set up under X, because it alway switches to [EMAIL PROTECTED] Hz, but
this doe
On Wed, 11 Feb 2004, LeVA wrote:
> Hi!
>
> I'm trying to run ut2003 under linux with an nvidia driver, but
> everytime I start the game it switches to 800x600 @ 56 Hz, altough my
> monitor does support 1024x768 @ 85 Hz, and 800x600 @ 100 Hz (which I
> can not set up under X, because it alway s
31 matches
Mail list logo