hi..
i am a newbie who is currently reading a book on
Xwindow applications programming .So there is little
program to connect to an Xserver.
it goes as
#include
#include
main()
{
Display *display=NULL;
display=XOpenDisplay((char *)NULL);
if(display==NULL)
{
> I'm running Fedora Core (XFree86 4.3.0) on a Dell
> Dimension 2400 with a 19" Daytek DT-95P
> monitor. It's i810 / 845G graphics. I can
> change resolutions, but I can't seem
> to get the refresh rate above 60hz.
I've also seen this problem on the Dimension 2400.
Just came across this, wh
On Fri, 2004-02-20 at 01:40, Simon Kitching wrote:
> Hi,
>
> I've got a Mandrake9.2 installation which has been running fine for many
> months. However I am now getting this message when starting any java gui
> app (eg jedit):
>
> [EMAIL PROTECTED] xsltmap]$ jedit
> current locale is not supporte
I've connected a TFT monitor to mi PC running Debian GNU/Linux and,
after having configured XFree86 at 1280x1024 as the manual said, I
noticed that the image was brighter and distorted on its lower end.
May it be the vertical frequency was wrong? I don't remember if I
tried 60Hz or only 75Hz.
As
Hi,
I've got a Mandrake9.2 installation which has been running fine for many
months. However I am now getting this message when starting any java gui
app (eg jedit):
[EMAIL PROTECTED] xsltmap]$ jedit
current locale is not supported in X11, locale is set to CX locale
modifiers are not supported, u
I have the same card. Diamond Stealth 64 DRAM S3 Trio64 on my
older Pentium Pro 200 Mhz machine. I am new to Linux but I can tell
you that I can not seem to get this card to work with XFree864.3, XFree86 4.1 or XFree86 3.3. Now, I have tried the textmode install
and that doesn't seem to work. Th
I recently required an old gateway 2000 solo laptop. It has a cirrus
logic gd 7548 video card.
Using the 'cirrus' driver and XFree86 4.2.1 the default video driver
options cause an X server lockup when any X clients connect. The
workaround I've gotten is to disable MMIO. But this sacrifices mos
Does X windows support the Diamond Stealth PCI S3 Trio64
card???
While compiling XFree86-4.3.0.1 recently, I got the following
error message:
In file included from text-mode.c:47:
loader.h:78: warning: ISO C doesn't support unnamed
structs/unions loader.h:78: unnamed fields of type
other than struct or
David Hansen Jr. wrote:
> I recently moved from Red Hat 9 to Fedora 1. In RH, my resolution &
> colors were fine. I had 1024x768 in 24-bit. When I moved to Fedora,
> When I try to run XFree86 in the same settings, it locks. The best I
> can do is 1024x768 in 8-bit. I've got an ATI Radeon 7000
I don't understand the question.
Mark.
On Wed, 18 Feb 2004, Sebastian Nauroth wrote:
> hello,
> I use two monitors and graphic cards at one computer. the graphic cards are a
> elsa victory erazor and an creative blaster tnt2 vanta. xfree86 use the
> drivewr riva128
Hello there
this is meenakshi from pune (INDIA)
today i was working on linux, when suddenly while accessing the windows partition
from linux , all the devices mouse, keyboard stopped responding and when i
restarted my computer the GUI is not there and the message X server could not be start
Hi,
my problem with my graphic card seems to be that for some reason agpart is not
available anymore!
I don't remember whether it should be loaded in the kernel at boot time (in that case
I don't
remember the file in which to intervene... Alzeimer I guess) or whether it suffices to
include it
in
I recently moved from Red Hat 9 to Fedora 1. In RH, my resolution &
colors were fine. I had 1024x768 in 24-bit. When I moved to Fedora,
When I try to run XFree86 in the same settings, it locks. The best I
can do is 1024x768 in 8-bit. I've got an ATI Radeon 7000 (64MB) and a
DigiView 17" monito
Neither of it did help. It still crashes without a logfile.
I reckon it has something to do with my BIOS-settings or MB chipset. When I tried to startx using only the PCI-card (my BIOS boots up with the AGP-card) and disabled all Video BIOS and Video RAM caching the Video BIOS version showed on
hello,
I use two monitors and graphic cards at one computer. the graphic cards are a
elsa victory erazor and an creative blaster tnt2 vanta. xfree86 use the
drivewr riva128 and nv1 and that was ok! but now I have black/colored menus
and bars and fonts on my erazor! I came to the problem throug
That's usually a video card driver problem or problem with a
related driver (like AGP drivers). If you run the server under
GDB you can get a backtrace and see where it's hung at.
Mark.
On Wed, 18 Feb 2004, Anders Johansson wrote:
> Hi,
>
> I have a problem with the
On Wed, 2004-02-18 at 18:19 +0100, Anders Johansson wrote:
> I haven't tried twm or fvwm, but I'll do that now
It just happened again under fvwm. I don't think it's a wm problem
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/list
On Wed, 2004-02-18 at 12:07 -0500, Michael Taylor wrote:
> Anders Johansson wrote:
> > I've been running the default X server in suse 8.2 and 9.0 with this
> > problem, and I recently installed 4.4 RC3 from xfree86.org in the hopes
> > that it would solve it, but the problem remains.
> >
> > I re
[EMAIL PROTECTED] wrote:
> I am trying to install RedHat Linux 7.0 on my KDS notebook. The installation went
> fine, except for the X-Server. It seems that 7.0 did not support my combination of
> hardware, so I decided to update my X-Server. I downloaded and
> installed 4.0.2 libc22 then 4.0.3 l
Quoth Jonathan McLean:
> check out this website for a sample XF86config file
> http://www-crypto.htw-saarland.de/weber/misc/linux/XF86Config-2410.twin
I don't get it - this page is for a dualhead setup using an nvidia card
with the nvidia binary drivers, not an i855. But is helpful at least to
s
Anders Johansson wrote:
> I've been running the default X server in suse 8.2 and 9.0 with this
> problem, and I recently installed 4.4 RC3 from xfree86.org in the hopes
> that it would solve it, but the problem remains.
>
> I really want this problem solved, as it is a major pain to live with,
> b
On Wed, Feb 18, 2004 at 11:44:49AM -0500, [EMAIL PROTECTED] wrote:
> I am trying to install RedHat Linux 7.0 on my KDS notebook. The installation went
> fine, except for the X-Server. It seems that 7.0 did not support my combination of
> hardware, so I decided to update my X-Server. I downloaded
Hi,
I have a problem with the X server that I'd like very much to track
down, or help track down but I'm absolutely clueless how to debug it.
Any help anyone can offer would be deeply appreciated.
Symptoms: at irregular intervals, the X server will spin up to 100% cpu
usage. during this time, the
I am trying to install RedHat Linux 7.0 on my KDS notebook. The installation went
fine, except for the X-Server. It seems that 7.0 did not support my combination of
hardware, so I decided to update my X-Server. I downloaded and
installed 4.0.2 libc22 then 4.0.3 libc22. I am enclosing the log Xfr
Mr. Taylor, I just want to thank you for all of your
help, it has been some of the most useful i have
recieved since i began my linux expedition. Anyways,
here is an attached copy of my log file that may allow
people to see why i have no devices detected.
-- Michael Taylor <[EMAIL PROTECTED]> wr
NUKE THEM wrote:
>
> this message appears over 500 times in my XFree86.log.
> I googled and found I'm not the only one with this messageflood.
> But I found no responses telling:
>
> What does this message mean?
> How can I solve the problem?
The message is generate because you are using a bina
Jonathan McLean wrote:
> Okay, i do not have anyone who can teach me hand son
> about linux, and so im still stumbling along. I
> cannot access the file with another computer because i
> cannot save it as a txt file. This is what i was
> going to do: save my log as a txt file, copy it to a
> flop
Okay, i do not have anyone who can teach me hand son
about linux, and so im still stumbling along. I
cannot access the file with another computer because i
cannot save it as a txt file. This is what i was
going to do: save my log as a txt file, copy it to a
floppy, bring it to a windows machine,
Technical Team wrote:
>
> Recently I have installed Redhat 9 and mandrake 9 on my system. But after
> completing the installation part, I am not able to get into GUI mode as
> the error message says that "No Screen Found".
Please do not send any followups to [EMAIL PROTECTED], as that mailing l
Hi,
this message appears over 500 times in my XFree86.log.
I googled and found I'm not the only one with this messageflood.
But I found no responses telling:
What does this message mean?
How can I solve the problem?
How can I tell the X to do a "last message repeated xyz-times" instead of
makin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
on 02/18/04 14:03, Nicolas MARC wrote:
> Yes, I855 supports 2 outputs.
> I your case you should have a video pipe to the LVDS output (flat panel)
> and the other one to a VGA output.
> Maybe the best is to check your Bios or the manufacturer's
Matthieu Herrb wrote:
> Many Linux distributions ships X with '-nolisten tcp' as the default
> option. This means that the X server won't accept remote connections.
> You need to use ssh X11 forwarding to connect remote applications in
> this case.
> I don't know if this is the case for fedora.
Fe
jean-christophe valiere wrote:
>
> I decided last week to update to XFree 4.3.0 and the
> X doesn't start ant more. It seems that the radeon
> driver fail to work with my Monitor.
> Here is the Error:
> Screen(s) found but none of them has a usable
> configurati
Jonathan McLean wrote:
> Also, i brought my XF86COnfig-4 file back to its
> supposedly original setup and normally it would boot
> startx and the mac monitor wouldnt work. Now i get an
> error stating that no device is loaded and that no
> screens are found:
>
> (II) v4l driver for Video4Linux
>
check out this website for a sample XF86config file
http://www-crypto.htw-saarland.de/weber/misc/linux/XF86Config-2410.twin
--- Nicolas MARC <[EMAIL PROTECTED]> wrote:
> Yes, I855 supports 2 outputs.
> I your case you should have a video pipe to the LVDS
> output (flat panel)
> and the other one
Okay, so i was having a problem with my mac monitor
and a person suggested to use the Option CrtcNumber
"1". Well, in deleted the email by accident and i
dont remember what section it goes under in my
XF86Config file.
Also, i brought my XF86COnfig-4 file back to its
supposedly original setup and
Yes, I855 supports 2 outputs.
I your case you should have a video pipe to the LVDS output (flat panel)
and the other one to a VGA output.
Maybe the best is to check your Bios or the manufacturer's documentation...
To use dual head anyway, you need patches to agpgart driver (until kernel
2.6 I gues
I believe that if the laptop can support two monitors,
meaning that, in windows atleast, you can use two
monitors with it, then you can support dual head. In
my experience, as long as the gfx card has two
outputs, it should support dual head.
--- Christopher Thom <[EMAIL PROTECTED]> wrote:
> Quoth
I'm a total keyboard newbie; I've been struggling with this for a while.
I've read the manpage and the READMEs in /usr/X11R6/lib/X11/xkb to no
avail.
I need to switch between Japanese and US keyboard layouts. For some
reason, setxkbmap won't let me use any other layout if I specify the
'jp'
One of my students today damaged the screen of his laptop. He reported the
supplier of his notebook has told him that the damage to the screen has been
caused by partitioning the disk and using Mandrake 9.2 (that is, XFree). The
notebook was sold with Windows XP (Home edition, I think).
Have yo
>Hi, people. I'm trying to get a dualhead-configuration up and running
>with two Voodoo3/Banshee cards, one is made by Creative and is a PCI-
>card and the other is a 3DFX AGP-card with tv-out, the MB is a Abit
>BX6 rev 2.0 and I think I have tried altering almost every BIOS-
>settings I could find
Respected Sir,
I'm working as a Lab assistant in Sri Krishna
Engineering
College coimbatore.
Last week one machine doesn't enter in Graphical mode.
Xserver failure message frequenlty shown in the
screen.
How we solve this problem.Please suggest Imediately.
Thanking You,
Mail : [
Hello,
I was using XFree 4.2.0 on my i386 computer with
a radeon 7500 Video Driver and a Hitachi CM2096ME
Monitor (H Freq/ V Freq: 30-82 Khz / 50-120 hz).
I decided last week to update to XFree 4.3.0 and the
X doesn't start ant more. It seems that
44 matches
Mail list logo
