Please find attached an error log from my Debian
Linux XWindows setup. I would appreciate guidence in how to rectify the troubled
configuration problem.
XFree86.0.log
Description: Binary data
If you want to use the later driver than you will need to update to
Xfree4.4.0
Kevin
email: [EMAIL PROTECTED]
Tel: +44 (0)118 971 5032
-Original Message-
From: Carlos Figueiredo [mailto:[EMAIL PROTECTED]
Sent: 12 July 2004 17:15
To: [EMAIL PROTECTED]
Subject: Re: [XFree86] rad
I'm planning to install VectorLinux 2.0 with XFree 3.3.6 on an old pentium. The
video hardware is onboard Trio64.
What is the XFree 3.3.6 support for Trio64 like? I guess before I start
installing I'll open the case up and find out exactly which version of the
chipset it has, however I just wanted
Hi,
I have installed
Redhat Linux 9.0 on Dell C600 laptop. But I am not able to boot it into
the graphical mode. During installation the monitor could not be probed
properly. I tried first with the unprobed monitor, and then Dell 1024x768
display panel options, but every time I keep getting t
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
root <[EMAIL PROTECTED]> writes:
> XFree86 Version 4.3.99.2
[...]
> Elf_RelocateEntry() Unsupported relocation type 28
This has been fixed in later versions. You might need to use "good"
versions of gcc and binutils as well.
--
Måns Rullgård
[EMAIL PROTECTED]
___
reI used this page to great success.
Good luck,
Mark
http://www.dkfz-heidelberg.de/spec/linux/modeline/
Thanx Mark
Thanx Mark but as you can see X has already produced these modelines, and
they work fine when I use the 1600x1200 mode. I guess My question really
isn't how? but rather why does it w
Warren Paul wrote:
reI used this page to great success.
Good luck,
Mark
http://www.dkfz-heidelberg.de/spec/linux/modeline/
Thanx Mark
Thanx Mark but as you can see X has already produced these modelines,
and they work fine when I use the 1600x1200 mode. I guess My question
really isn't how? but
Warren Paul wrote:
reI used this page to great success.
Good luck,
Mark
http://www.dkfz-heidelberg.de/spec/linux/modeline/
Thanx Mark
Thanx Mark but as you can see X has already produced these modelines, and
they work fine when I use the 1600x1200 mode. I guess My question really
isn't how? but
Warren Paul wrote:
I really Appreciate your help any ways. The problem really is that X is
getting the correct mode of 1680x1050. And everything looks crystal
clear without any gliches. The problem is that It will only do this when
I give it a size I guess my screen can't handle more than x can'
On Tuesday 13 July 2004 22:04, Warren Paul wrote:
> My question then Is what is X doing when it
> works it out, that I'm not doing when I tell it manually?
In your original post I remember seeing only one configuration/logfile. Would
you mind emailing me (us?) both configurations, and both full l
On Tue, Jul 13, 2004 at 12:51:55PM -0700, Mark Knecht wrote:
> My problem was that XF86config was choosing to put a bunch of
> modelines in the config file which worked but looked lousy. For
> instance, in the case of my laptop which has a 1280x800 native
> resolution to the screen it was se
On Tuesday 13 July 2004 22:30, Jay R. Ashworth wrote:
> On Tue, Jul 13, 2004 at 12:51:55PM -0700, Mark Knecht wrote:
> > My problem was that XF86config was choosing to put a bunch of
> > modelines in the config file which worked but looked lousy. For
> > instance, in the case of my laptop which
Hi.
On Tue, 13 Jul 2004, Måns Rullgård wrote:
> root <[EMAIL PROTECTED]> writes:
>
> > XFree86 Version 4.3.99.2
>
> [...]
>
> > Elf_RelocateEntry() Unsupported relocation type 28
>
> This has been fixed in later versions. You might need to use "good"
> versions of gcc and binutils as well.
Hm
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/kcnetwork.net:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
XFree86 Version 4.4.0
Release Date: 29 February 2004
X Protocol Version 11, Revision 0, Release
Torsten Zirzlaff <[EMAIL PROTECTED]> writes:
> Hi.
>
> On Tue, 13 Jul 2004, Måns Rullgård wrote:
>
>> root <[EMAIL PROTECTED]> writes:
>>
>> > XFree86 Version 4.3.99.2
>>
>> [...]
>>
>> > Elf_RelocateEntry() Unsupported relocation type 28
>>
>> This has been fixed in later versions. You might nee
16 matches
Mail list logo