I've installed the 4.5.0 binary, and compiled a new kernel mga.o
module using the 4.5.0 Xdrm.tgz sources. Although I don't think I
really need any of its features, I've also downloaded and installed
the latest mga_hal_drv.o module from the Matrox site.
I seem to have two problems, possibly relat
Has anyone been able to set up XFree86 4.4.0 or 4.5.0 to work with an ATI
FireGL Mobility T2 video card completely problem-free?I got this
working with no difficulty using the supplied "radeon" driver but then
discovered that, in one particular situation, the server always crashes
signal
On Thu, Mar 24, 2005 at 11:03:13AM +0100, Holger Pieta wrote:
>Hi
>
>After some hours of struggling I was finaly able to bring xinerama up.
>Problem: With xinerama the xterm shows no blinking cursor anymore and
>"make menuconfig" hangs at startup (but not always) showing more or
>less half of the m
On Sun, Mar 27, 2005 at 01:30:53AM -0800, Jim Osborn wrote:
>I've installed the 4.5.0 binary, and compiled a new kernel mga.o
>module using the 4.5.0 Xdrm.tgz sources. Although I don't think I
>really need any of its features, I've also downloaded and installed
>the latest mga_hal_drv.o module fro
In the /etc/X11/XF86Config-4 file, replace Driver "vga" with
Driver "sis". You are currently using the basic vga (ie. 640x480
in 16 colors) driver rather than the native SiS driver.
Mark.
On Sat, 26 Mar 2005, Andrew Spaccio wrote:
> Hello,
>
> I can not get xserver to
this is the correct link:
see alice!
http://seealicehe2s30hsjch7l0h.floutsellae.com/
___
XFree86 mailing list
XFree86@XFree86.Org
http://XFree86.Org/mailman/listinfo/xfree86
On Sun, Mar 27, 2005 at 12:37:19PM -0500, David Dawes wrote:
>On Sun, Mar 27, 2005 at 01:30:53AM -0800, Jim Osborn wrote:
>>I've tried many Modes and Modeline specifications, taking the timings
>>from my old 3.3.6 config, but they all produce this result. None of
>>the docs I've seen, either from
On Sun, Mar 27, 2005 at 12:37:19PM -0500, David Dawes wrote:
> I don't know what the state of the mga HAL module is. We should
> change the default to not load it if it no longer works.
The latest HALlib on the Matrox site seems to be for X-4.3.0. I
assume the mismatch between 4.3.0 and 4.5.0 i
Hi, my name is Charly I'm from BA, Argentine. I'm
working with cinema postproduction. I would like to
access to the 3D LUT in a Nvidia card.
How can I access to the 3D lut?
Thanx to all,
Sincerely,
Charly.
__
Do you Yahoo!?
Yahoo! Small Busine
9 matches
Mail list logo