t xorg.conf.d is. After removing xorg.conf.d the
mechanism works again.
If there is a way to specify priorities for video drivers in xorg.conf.d
(matching vendor IDs) to replace that mechanism please let me know.
Best regards,
Stefan
Public Key available
---
en 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default fglrx Screen 0"
Screen "Builtin Default radeonhd Screen 0"
Screen "Buil
for us.
Stefan
Public Key available
------
Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53 479 D-90409 Nürnberg
http://www.suse.deGermany
ations, which use it, this would be the way to go
...
Best regards,
Stefan
Public Key available
------
Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53 479 D-904
On Tue, Apr 06, 2010 at 07:23:07AM -0700, Dan Nicholson wrote:
> On Tue, Apr 6, 2010 at 6:57 AM, Julien Cristau wrote:
> > On Tue, Apr 6, 2010 at 14:09:10 +0200, Stefan Dirsch wrote:
> >
> >> On Tue, Apr 06, 2010 at 11:54:49AM +0200, Julien Cristau wrote:
> >> &
ds,
Stefan
Public Key available
------
Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53 479 D-90409 Nürnberg
http://www.suse.de
On Sun, Mar 01, 2009 at 05:53:36PM +0100, Julien Cristau wrote:
> On Sat, Feb 28, 2009 at 14:46:19 +0100, Stefan Dirsch wrote:
>
> > Hi
> >
> > I'm wondering what happened to libfreetype.so Xserver module. It's no
> > longer been built with xorg-server 1
fan
Public Key available
----------
Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53 479 D-90409 Nürnberg
http://w
y *very*
low. We also needed to add this change in behaviour to our release
notes. Therefore I was *very* surprised to see upstream X.Org making
DontZap the default.
Best regards,
Stefan
Public Key available
--
Stefan Dirsch (Res. & Dev.) S
Best regards,
Stefan
Public Key available
----------
Stefan Dirsch (Res. & Dev.) SUSE LINUX Products GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53 479 D-90409 Nürnberg
http://www.suse.deGermany
--
ww.x.org/wiki/Development/Documentation/SubmittingPatches/
Otherwise I'm afraid it will be ignored successfully. :-(
CU,
Stefan
Public Key available
--
Stefan Dirsch (Res. & Dev.) SUSE LINUX GmbH
Tel: 0911-740 53 0
On Wed, Feb 22, 2017 at 11:03:20AM +0100, Stefan Dirsch wrote:
> > Please consider the following patch:
> >
> > --- glamor/glamor_dash.c.original 2016-03-11 19:43:16.0 +0100
> > +++ glamor/glamor_dash.c2017-02-19 20:00:11.883218927
rvMsg(pScrn->scrnIndex, X_INFO, "MemoryBandwidth == %d\n",
ulMemoryBandwidth);
Either initialize it or no longer reference it on G200e4. ;-)
Thanks,
Stefan
Public Key available
---
Reenable default device when shutting down VGA arbitration.
https://bugzilla.opensuse.org/show_bug.cgi?id=714677
Patch author: Egbert Eich
Signed-off-by: Egbert Eich
---
src/common_vgaarb.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/src/common_vgaarb.c b/src/common_vgaarb.c
i
From: Egbert Eich
Reenable default device when shutting down VGA arbitration.
https://bugzilla.opensuse.org/show_bug.cgi?id=714677
---
src/common_vgaarb.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/src/common_vgaarb.c b/src/common_vgaarb.c
index 7a7d204..2c0686e 100644
--- a/sr
https://bugzilla.opensuse.org/show_bug.cgi?id=918466
Signed-off-by: Stefan Dirsch
---
mkfontscale.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/mkfontscale.c b/mkfontscale.c
index da93e0c..e9b9488 100644
--- a/mkfontscale.c
+++ b/mkfontscale.c
@@ -579,11 +579,14
On Sun, Apr 24, 2016 at 05:17:48PM +0200, Julien Cristau wrote:
> On Thu, Apr 21, 2016 at 15:22:36 +0200, Stefan Dirsch wrote:
>
> > From: Egbert Eich
> >
> > Reenable default device when shutting down VGA arbitration.
> > https://bugzilla.opensuse.org/show_bug.
From: Frederic Crozat
Remove the 10x7 heuristic, since the server has equivalent code now.
Instead, disable "acceleration" under qemu, since taking the hypercall
trap is really quite expensive and you're better off doing noaccel.
(Fedora)
---
src/alp_driver.c | 7 +++
1 file changed, 7 inser
From: Frederic Crozat
Due to graphics corruption default to 16bpp in virt instead of 24 (Fedora).
Do the same on XenSource gfx, which suffers from the same issue.
---
src/alp_driver.c | 11 ++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/src/alp_driver.c b/src/alp_drive
From: Frederic Crozat
Disable "acceleration" under qemu, since taking the hypercall trap
is really quite expensive and you're better off doing noaccel.
---
src/alp_driver.c | 10 ++
1 file changed, 10 insertions(+)
diff --git a/src/alp_driver.c b/src/alp_driver.c
index bd5e52f..ba55247
From: Frederic Crozat
Due to graphics corruption default to 16bpp in virt instead of 24 (Fedora).
Do the same on XenSource gfx, which suffers from the same issue.
---
src/alp_driver.c | 15 ++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/src/alp_driver.c b/src/alp_d
On Tue, Apr 26, 2016 at 11:54:58AM +0200, Mark Kettenis wrote:
> > From: Stefan Dirsch
> > Date: Tue, 26 Apr 2016 11:45:38 +0200
> >
> > From: Frederic Crozat
> >
> > Due to graphics corruption default to 16bpp in virt instead of 24 (Fedora).
> > D
On Tue, Apr 26, 2016 at 11:57:27AM +0200, Mark Kettenis wrote:
> > From: Stefan Dirsch
> > Date: Tue, 26 Apr 2016 11:45:15 +0200
> >
> > From: Frederic Crozat
> >
> > Remove the 10x7 heuristic, since the server has equivalent code now.
> > Instead
On Tue, Apr 26, 2016 at 12:58:55PM +0200, Julien Cristau wrote:
> On Tue, Apr 26, 2016 at 11:45:15 +0200, Stefan Dirsch wrote:
>
> > From: Frederic Crozat
> >
> > Remove the 10x7 heuristic, since the server has equivalent code now.
> > Instead, disable "acc
From: Dominique Leuenberger
Without these headers, we can run into build errors like:
intel_driver.c: In function 'I830HandleUEvents':
intel_driver.c:745:14: error: storage size of 's' isn't known
intel_video.c:104:39: warning: initialization discards 'const' qualifier from
pointer target type
From: Dominique Leuenberger
In order for fstat to be usable, sys/stat.h needs to be included or we
might end up in a build failure like:
sna_driver.c: In function 'sna_handle_uevents':
sna_driver.c:799:6: error: implicit declaration of function 'fstat'
[-Werror=implicit-function-declaration]
--
On Tue, Apr 26, 2016 at 01:51:39PM +0100, Chris Wilson wrote:
> On Tue, Apr 26, 2016 at 02:42:52PM +0200, Stefan Dirsch wrote:
> > From: Dominique Leuenberger
> >
> > Without these headers, we can run into build errors like:
>
> sys/stat.h is already included. Curiou
Disable "acceleration" under qemu, since taking the hypercall trap
is really quite expensive and you're better off doing noaccel. Patch
is based on the one by "Adam Jackson"
http://pkgs.fedoraproject.org/cgit/rpms/xorg-x11-drv-cirrus.git/tree/cirrus-1.2.0-qemu.patch?id=daccd1c8174623500eddfa297d8
On Tue, Apr 26, 2016 at 03:49:12PM +0200, Julien Cristau wrote:
> On Tue, Apr 26, 2016 at 14:09:24 +0200, Stefan Dirsch wrote:
>
> > On Tue, Apr 26, 2016 at 12:58:55PM +0200, Julien Cristau wrote:
> > > On Tue, Apr 26, 2016 at 11:45:15 +0200, Stefan Dirsch wrote:
> >
Xserver cannot be started with Tiling enabled on SuperSavage.
https://bugzilla.opensuse.org/show_bug.cgi?id=805380
Signed-off-by: Stefan Dirsch
---
src/savage_driver.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/src/savage_driver.c b/src/savage_driver.c
index
On Wed, Apr 27, 2016 at 11:54:49AM -0400, Adam Jackson wrote:
> On Tue, 2016-04-26 at 16:26 +0200, Stefan Dirsch wrote:
> > Disable "acceleration" under qemu, since taking the hypercall trap
> > is really quite expensive and you're better off doing noaccel. Patch
&g
On Wed, Apr 27, 2016 at 11:59:43AM -0400, Adam Jackson wrote:
> On Tue, 2016-04-26 at 13:57 +0200, Stefan Dirsch wrote:
> > From: Frederic Crozat
> >
> > Due to graphics corruption default to 16bpp in virt instead of 24 (Fedora).
> > Do the same on XenSource gfx,
On Wed, Apr 27, 2016 at 05:24:53PM -0400, Adam Jackson wrote:
> On Wed, 2016-04-27 at 16:16 +0200, Hans de Goede wrote:
> > Hi,
> >
> > On 27-04-16 16:02, Stefan Dirsch wrote:
> > > Xserver cannot be started with Tiling enabled on SuperSavage.
> > > https:
On Wed, Apr 27, 2016 at 11:23:10PM +0100, Emil Velikov wrote:
> On 26 April 2016 at 15:07, Stefan Dirsch wrote:
> > On Tue, Apr 26, 2016 at 01:51:39PM +0100, Chris Wilson wrote:
> >> On Tue, Apr 26, 2016 at 02:42:52PM +0200, Stefan Dirsch wrote:
> >> &g
This seems to be a feature that isn't tested well. Too many VBE 3.0
BIOSes are incorrectly implemented.
Signed-off-by: Stefan Dirsch
---
src/vesa.c | 8 +---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/src/vesa.c b/src/vesa.c
index 5b9ccb0..e51effe 100644
--- a/src/v
Builtin modesetting driver didn't work on 32bit on cirrus KMS. See
https://bugzilla.suse.com/show_bug.cgi?id=917385 for more details.
Signed-off-by: Stefan Dirsch
---
hw/xfree86/drivers/modesetting/dumb_bo.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/hw/xfree86/dr
From: Andreas Schwab
R_SP is also defined in on m68k.
Also remove duplicate definitions.
Signed-off-by: Andreas Schwab
---
hw/xfree86/int10/xf86x86emu.c | 2 +-
hw/xfree86/x86emu/x86emu/regs.h | 8
2 files changed, 1 insertion(+), 9 deletions(-)
diff --git a/hw/xfree86/int10/xf86x
On Thu, Apr 28, 2016 at 11:31:51AM +0200, Julien Cristau wrote:
> On Thu, Apr 28, 2016 at 11:06:38 +0200, Stefan Dirsch wrote:
>
> > On Wed, Apr 27, 2016 at 11:23:10PM +0100, Emil Velikov wrote:
> > > P.S. For xorg-devel patches please set the correct prefix $ git
From: Reinhard Max
For IPv6 add a link local addresses to the end of the list passed to
the XDMCP servers.
Reason: for link local addresses the XDMCP server would need to either
know the interface thru a scope identifier or try all available interfaces.
If they don't this address will fail in whi
On Fri, Apr 29, 2016 at 10:24:17AM +0200, Mark Kettenis wrote:
> > Date: Fri, 29 Apr 2016 09:34:08 +0200
> > From: Julien Cristau
> >
> > On Thu, Apr 28, 2016 at 16:10:01 +0200, Mark Kettenis wrote:
> >
> > > > From: Stefan Dirsch
>
On Fri, Apr 29, 2016 at 09:40:05AM +0200, Julien Cristau wrote:
> On Thu, Apr 28, 2016 at 15:21:15 +0200, Stefan Dirsch wrote:
>
> > From: Reinhard Max
> >
> > For IPv6 add a link local addresses to the end of the list passed to
> > the XDMCP servers.
> >
https://bugzilla.opensuse.org/show_bug.cgi?id=918466
Signed-off-by: Stefan Dirsch
---
mkfontscale.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/mkfontscale.c b/mkfontscale.c
index da93e0c..e9b9488 100644
--- a/mkfontscale.c
+++ b/mkfontscale.c
@@ -579,11 +579,14
https://bugzilla.opensuse.org/show_bug.cgi?id=918466
Signed-off-by: Stefan Dirsch
Reviewed-by: Adam Jackson
---
mkfontscale.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/mkfontscale.c b/mkfontscale.c
index da93e0c..e9b9488 100644
--- a/mkfontscale.c
+++ b
On Tue, May 10, 2016 at 10:18:59AM -0400, Adam Jackson wrote:
> On Tue, 2016-05-10 at 16:01 +0200, Stefan Dirsch wrote:
> > https://bugzilla.opensuse.org/show_bug.cgi?id=918466
> >
> > Signed-off-by: Stefan Dirsch
> > Reviewed-by: Adam Jackson
>
> What I me
e.com/show_bug.cgi?id=979554
Signed-off-by: Stefan Dirsch
---
conf/50-synaptics.conf | 46 --
conf/70-synaptics.conf | 46 ++
conf/Makefile.am | 2 +-
man/synaptics.man | 2 +-
4 files changed, 48 inser
erred over libinput.
Similar to what was done for wacom configuration file.
https://bugzilla.suse.com/show_bug.cgi?id=979554
Signed-off-by: Stefan Dirsch
---
10-evdev.conf | 40
65-evdev.conf | 40
Makefile.am | 2 +
On Fri, May 20, 2016 at 11:47:45AM +1000, Peter Hutterer wrote:
> On Thu, May 19, 2016 at 05:37:59PM +0200, Stefan Dirsch wrote:
> > Bump up evdev driver to 65, so it get's perferred over libipnut,
> > which was dropped down to 60. Reason is, that evdev driver is more
> &g
On Fri, May 20, 2016 at 12:20:02PM +0200, Hans de Goede wrote:
> Hi,
>
> On 19-05-16 17:35, Stefan Dirsch wrote:
> >Bump up synaptics driver to 70, so it get's perferred over libipnut,
> >which was dropped down to 60. Reason is, that synaptics driver is more
> >of
On Mon, May 23, 2016 at 11:41:00AM +1000, Peter Hutterer wrote:
> On Thu, May 19, 2016 at 05:35:57PM +0200, Stefan Dirsch wrote:
> > Bump up synaptics driver to 70, so it get's perferred over libipnut,
> > which was dropped down to 60. Reason is, that synaptics driver is more
Hi Egbert
you defintely have my
Reviewed-by: Stefan Dirsch
But could you still fix the typo in the changelog (relace -> replace) and
mention the bugreport
https://bugzilla.opensuse.org/show_bug.cgi?id=981522
as reference? And also add that the issue has been reproduced on 32bit syst
Bump up the vmmouse driver to 70, so it get's preferred over libinput, which
was dropped down to 60. This is only relevant for older kernels, which do not
yet have the functionality provided by vmmouse driver. On recent kernels
vmmouse driver is no longer loaded at all.
Signed-off-by: S
On Tue, Jun 21, 2016 at 11:46:05AM -0400, Adam Jackson wrote:
> On Fri, 2016-04-29 at 11:22 +0200, Stefan Dirsch wrote:
> > On Fri, Apr 29, 2016 at 09:40:05AM +0200, Julien Cristau wrote:
> > > On Thu, Apr 28, 2016 at 15:21:15 +0200, Stefan Dirsch wrote:
> > >
sion__'
strndup(const char *str, size_t n);
This is caused by HAVE_STRNDUP not being set (it is set from xorg-server.h),
causing os.h to redefine it.
Signed-off-by: Stefan Dirsch
---
vmwgfx/vmwgfx_overlay.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/vmwgfx/vmwgfx_overlay.c b/vmwgfx/vm
vmmouse_client.c:38:
/usr/include/xorg/os.h:579:1: error: expected identifier or '(' before
'__extension__'
strndup(const char *str, size_t n);
This is caused by HAVE_STRNDUP not being set (it is set from xorg-server.h),
causing os.h to redefine it.
Signed-off-by: Stefan
On Tue, Oct 14, 2014 at 10:02:13AM +0900, Michel Dänzer wrote:
> On 13.10.2014 21:58, Stefan Dirsch wrote:
> >On Tue, Oct 07, 2014 at 11:56:55AM +0100, Daniel Stone wrote:
> >>Hi,
> >>
> >>On 7 October 2014 10:54, Michel Dänzer wrote:
> >>
>
On Tue, Oct 07, 2014 at 11:56:55AM +0100, Daniel Stone wrote:
> Hi,
>
> On 7 October 2014 10:54, Michel Dänzer wrote:
>
> On 07.10.2014 18:46, Daniel Martin wrote:
>
> On 7 October 2014 11:29, Stefan Dirsch wrote:
>
> Without this the buil
Hi
Find another simple buildfix against current intel-gpu-tools git sources
attached.
Thanks,
Stefan
Public Key available
--
Stefan Dirsch (Res. & Dev.) SUSE LINUX GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53
xorg-server 1.20 removed this check, so implement this in the driver
itself.
Signed-off-by: Stefan Dirsch
---
src/savage_driver.c | 10 --
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/src/savage_driver.c b/src/savage_driver.c
index 58a294d..3cda923 100644
--- a/src
Apparently this is needed in src/atipcirename.h since xorg-server
1.20 in order to still build this driver.
Signed-off-by: Stefan Dirsch
---
src/atipcirename.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/src/atipcirename.h b/src/atipcirename.h
index e65ae3c..3e7f686 100644
--- a/src
xorg-server 1.20 removed this check, so implement this in the driver
itself.
Signed-off-by: Stefan Dirsch
---
src/tseng_driver.c | 8 ++--
src/tseng_mode.c | 8
2 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/src/tseng_driver.c b/src/tseng_driver.c
index 0db62e5
xorg-server 1.20 removed this check, so implement this in the driver
itself.
Signed-off-by: Stefan Dirsch
---
src/s3v_driver.c | 21 ++---
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/src/s3v_driver.c b/src/s3v_driver.c
index e5dd2e4..b546c4f 100644
--- a/src
On Tue, Jun 26, 2018 at 04:13:01PM +0100, Emil Velikov wrote:
> On 25 June 2018 at 14:55, Stefan Dirsch wrote:
> > xorg-server 1.20 removed this check, so implement this in the driver
> > itself.
> >
> Quick look shows that Adam, updated most drivers although a few
the front buffer is passed
to drmModeAddFB(). Fix it by replacing with the back buffer bpp,
drmmode->kbpp.
Signed-off-by: Takashi Iwai
Tested-by: Stefan Dirsch
---
hw/xfree86/drivers/modesetting/drmmode_display.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/hw/xfree86/driv
c Key available
------
Stefan Dirsch (Res. & Dev.) SUSE LINUX GmbH
Tel: 0911-740 53 0Maxfeldstraße 5
FAX: 0911-740 53 479 D-90409 Nürnberg
http://www.suse.deGermany
SUSE Linux GmbH, GF: Feli
if we find a kernel driver the code leave the pci slot claimed which
stops us falling back. unclaim the pci slot. patch inspired by
correspondant patch for cirrus driver by Dave Airlie.
Signed-off-by: Stefan Dirsch
---
src/ast_driver.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion
Seems some code came from cirrus driver by copy & paste. Fixed
this in error message about device already in use by KMS module.
Signed-off-by: Stefan Dirsch
---
src/ast_driver.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/ast_driver.c b/src/ast_driver.c
index 677
Seems some code came from cirrus driver by copy & paste. Fixed
this in error message about device already in use by KMS module.
Signed-off-by: Stefan Dirsch
---
src/ast_driver.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/ast_driver.c b/src/ast_driver.c
index 677
if we find a kernel driver the code leave the pci slot claimed which
stops us falling back. unclaim the pci slot. patch inspired by
correspondant patch for cirrus driver by Dave Airlie.
Signed-off-by: Stefan Dirsch
---
src/ast_driver.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion
On Tue, Mar 18, 2014 at 07:53:30AM +1000, Dave Airlie wrote:
> On Mon, Mar 17, 2014 at 10:48 PM, Stefan Dirsch wrote:
> > Seems some code came from cirrus driver by copy & paste. Fixed
> > this in error message about device already in use by KMS module.
> >
> &g
On Tue, Mar 18, 2014 at 09:51:11AM +1000, Dave Airlie wrote:
> On Tue, Mar 18, 2014 at 9:16 AM, Stefan Dirsch wrote:
> > On Tue, Mar 18, 2014 at 07:53:30AM +1000, Dave Airlie wrote:
> >> On Mon, Mar 17, 2014 at 10:48 PM, Stefan Dirsch wrote:
> >> > Seems some code c
70 matches
Mail list logo